[vdr] Airstar2, device 3 has no lock

Harald Milz hm at seneca.muc.de
Wed Aug 3 09:48:10 CEST 2005


voitto.tuomainen at nokia.com wrote:
> My problem is that while I record one program, and change channel to another, which is not in the same channel transponder (?/multiplexer) as the one is recorded, I get the error: device 3 has no lock, can't attach receiver. 

I have a similar problem with a Skystar2 and a FuSi Activy (both budget
cards), both are connected to a 4-port LNB individually. Whenever a
recording starts, I get the exact same error message... Software is
SUSE 9.2-i386 w/ kernel 2.6.11.4-20050418133015 (sic!), vdr-1.3.26,
linuxtv-dvb-1.1.1.  Recording works fine on my other machine with
vdr-1.3.26 with stock SUSE 9.3 drivers (kernel 2.6.11.4-21.7)

Log: 

Jul 26 23:05:00 seneca vdr[15407]: record /video/Der_M344dchenmord_(1^B2)/2005-07-26.23:05.99.99.rec
Jul 26 23:05:00 seneca vdr[15407]: creating directory /video/Der_M344dchenmord_(1^B2)
Jul 26 23:05:00 seneca vdr[15407]: creating directory /video/Der_M344dchenmord_(1^B2)/2005-07-26.23:05.99.99.rec
Jul 26 23:05:00 seneca vdr[15407]: recording to '/video/Der_M344dchenmord_(1^B2)/2005-07-26.23:05.99.99.rec/001.vdr'
Jul 26 23:05:05 seneca vdr[15407]: ERROR: device 1 has no lock, can't attach rec
eiver!
Jul 26 23:05:05 seneca vdr[15407]: buffer stats: 0 (0%) used



Usually, device 1 is the Activy card because the skystar2 driver is loaded
first:




Jul 29 20:13:52 seneca kernel: Linux video capture interface: v1.00
Jul 29 20:13:53 seneca kernel: saa7146: register extension 'dvb'.
Jul 29 20:13:54 seneca kernel: drivers/media/dvb/b2c2/skystar2.c: FlexCopII(rev. 130) chip found
Jul 29 20:13:54 seneca kernel: drivers/media/dvb/b2c2/skystar2.c: the chip has 6 hardware filters
Jul 29 20:13:54 seneca kernel: DVB: registering new adapter (SkyStar2).
Jul 29 20:13:55 seneca kernel: i2c_readbytes: i2c read error (addr 0a, err == -121)
Jul 29 20:13:56 seneca kernel: mt352_read_register: readreg error (ret == -121)
Jul 29 20:13:56 seneca kernel: DVB: registering frontend 0 (Zarlink VP310 DVB-S) ...
Jul 29 20:13:56 seneca kernel: saa7146: register extension 'budget dvb'.
Jul 29 20:13:56 seneca kernel: saa7146: found saa7146 @ mem e0aa2000 (revision 1, irq 5) (0x1131,0x4f61).
Jul 29 20:13:56 seneca kernel: DVB: registering new adapter (Fujitsu Siemens Activy Budget-S PCI).
Jul 29 20:13:56 seneca kernel: adapter failed MAC signature check
Jul 29 20:13:56 seneca kernel: encoded MAC from EEPROM was ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff
Jul 29 20:13:56 seneca kernel: DVB: registering frontend 1 (Philips TDA8083 DVB-S)...


Any idea? 


-- 
The biggest difference between time and space is that you can't reuse
time.
		-- Merrick Furst



More information about the vdr mailing list