[vdr] VDR-1.3.37: retuning -- possibly a fix for VDSB
rnissl at gmx.de
Sun Dec 4 23:22:21 CET 2005
the attached patch introduces some timeouts while the device is tuning
and when it looses the lock:
DISEQC_REPEAT_TIMEOUT (500 ms) is used to repeat the DiSEqC signalling
in case the where a multiswitch receives at first a malformed message
and therefore doesn't switch.
TUNE_TO_RETUNE_TIMEOUT (3000 ms) is used to instruct the device to start
the tuning operation once again in case the above DiSEqC signalling
LOST_LOCK_TO_RETUNE_TIMEOUT (500 ms) lets the device retune after a
LOCKED to NOT LOCKED transition, probably under bad reception conditions.
Please give the patch a try and report success or failure.
Tests of special interest:
- bad reception conditions (DVB-T)
- steering dishes
Dipl.-Inform. (FH) Reinhard Nissl
mailto:rnissl at gmx.de
-------------- next part --------------
A non-text attachment was scrubbed...
Size: 3393 bytes
Desc: not available
Url : http://www.linuxtv.org/pipermail/vdr/attachments/20051204/639b82b7/vdr-1.3.37-tuner.bin
More information about the vdr