[vdr] nvram-wakeup problems

[Simon Baxter]

Hello.

I'm trying to get nvram-wakeup working.  My motherboard is supported with
the latest CVS
nvram-wakeup: Following DMI entries found:
nvram-wakeup:  - Mainboard vendor:   "SHUTTLE INC"
nvram-wakeup:  - Mainboard type:     "FX43"
nvram-wakeup:  - Mainboard revision: ""
nvram-wakeup:  - BIOS vendor:        "Phoenix Technologies, LTD"
nvram-wakeup:  - BIOS version:       "6.00 PG"
nvram-wakeup:  - BIOS release:       "12/30/2003"
nvram-wakeup: Using infowriter "shuttle_sk43g" (automatically detected)
nvram-wakeup: Using following bios info:


but the clock seems to be set to hour (0xFF) and can't be set from
nvram-wakeup :
[root at media nvram-wakeup]# nvram-wakeup --directisa
<snip>
nvram-wakeup: Opening /dev/rtc in O_RDONLY mode...
nvram-wakeup: Hardware clock: 2005-06-10 14:19:05
nvram-wakeup: rtc.tm_isdst : 1
nvram-wakeup: rtc.tm_gmtoff: 3600
nvram-wakeup: diff         : 3600
nvram-wakeup: RTC is running in UTC/GMT!
nvram-wakeup: Test (this should be the current time of the hardware clock):
Fri Jun 10 14:19:05 2005
<snip>
nvram-wakeup: value of the addr_stat    byte is: 0x9F.
nvram-wakeup: value of the addr_day     byte is: 0xFF.
nvram-wakeup: value of the addr_hour    byte is: 0xFF.
nvram-wakeup: value of the addr_min     byte is: 0xFF.
nvram-wakeup: value of the addr_sec     byte is: 0xFF.
nvram-wakeup: value of the addr_chk_h   byte is: 0x1A.
nvram-wakeup: value of the addr_chk_l   byte is: 0x74.
nvram-wakeup: Checksum is: 0x1A74.
nvram-wakeup: WakeUp Hour value (31) not correct.
[root at media nvram-wakeup]# nvram-wakeup --directisa -s $((`date +%s` + 20 *
60))
nvram-wakeup: WakeUp Hour value (31) not correct.


Any ideas?