[vdr] nvram-wakeup problems

Sergei Haller Sergei.Haller at math.uni-giessen.de
Fri Jun 10 17:24:27 CEST 2005


On Fri, 10 Jun 2005, Simon Baxter (SB) wrote:

SB> nvram-wakeup: value of the addr_stat    byte is: 0x9F.
SB> nvram-wakeup: value of the addr_day     byte is: 0xFF.
SB> nvram-wakeup: value of the addr_hour    byte is: 0xFF.
SB> nvram-wakeup: value of the addr_min     byte is: 0xFF.
SB> nvram-wakeup: value of the addr_sec     byte is: 0xFF.
SB> nvram-wakeup: value of the addr_chk_h   byte is: 0x1A.
SB> nvram-wakeup: value of the addr_chk_l   byte is: 0x74.
SB> nvram-wakeup: Checksum is: 0x1A74.
SB> nvram-wakeup: WakeUp Hour value (31) not correct.


Please go into your BIOS Setup, enable the wakeup and _change_ every value 
(day, hour, minute, second) of the wakeup time. 

Then try running nvram-wakeup again.

On some boards this procedure will "initialize" the stored values to 
values which make sense.


        Sergei
-- 
--------------------------------------------------------------------  -?)
         eMail:       Sergei.Haller at math.uni-giessen.de               /\\
-------------------------------------------------------------------- _\_V
Be careful of reading health books, you might die of a misprint.
                -- Mark Twain



More information about the vdr mailing list