[vdr] [PATCH] Priority of transfer-mode should not be -1

Anssi Hannula anssi.hannula at gmail.com
Wed Jun 29 03:08:34 CEST 2005


Hi!

The transfer-mode uses always priority -1.

That presents a problem: If I connect to that vdr using streamdev, it 
switches the first budget device off from the multiplex transfered to 
the FF card, although there is a second identical budget device available.

Also, if I had DVB-S FF and only one DVB-T budget and had a DVB-T 
recording with priority 10 and Primary Limit at 20, live DVB-T video 
would (wouldn't it?) be severed.

Klaus, shouldn't transfer-mode be also using the Primary Limit value, so 
that recordings with priority less than Primary Limit couldn't distract 
the output of primary device?

Patch attached.

-- 
Anssi Hannula

-------------- next part --------------
A non-text attachment was scrubbed...
Name: vdr-transfer_primary_limit.diff
Type: text/x-patch
Size: 574 bytes
Desc: not available
Url : http://www.linuxtv.org/pipermail/vdr/attachments/20050629/1820d6ff/vdr-transfer_primary_limit.bin


More information about the vdr mailing list