[vdr] Help: Twinhan VP-1022a
andreyv at ece.ubc.ca
Tue Mar 22 20:52:19 CET 2005
could you give me some guide lines what you did to make this card work
We can communicate directly over email if you would prefer.
>I'm using a Twinhan VisionPlus 1020 card. Unfortunately, this card seems to
>use the same device numbers than some analog cards do, and the driver Knoppix
>loads will hang the system.
>I figured out that I have to load the bttv module with these options:
>I have no idea on how to do this with Knoppix, but on Gentoo I created a file
>"/etc/modules.d/bttv" and put the following in it:
>options bttv i2c_hw=1 card=0x71
>Then run modules-update.
>On Fedora, you might want to try to modprobe bttv like this:
>modprobe bttv i2c_hw=1 card=0x71
>Hope this helps,
More information about the vdr