[vdr] (offtopic) Voltage moding rev 1.3
paul.lacatus at gmail.com
Mon Jan 2 20:28:46 CET 2006
On 1/2/06, Oliver Endriss <o.endriss at gmx.de> wrote:
> Oliver Endriss wrote:
> > Paul Lacatus wrote:
> > > Sorry about offtopic but from vdr wiki I found that there is a way to
> > > improve the stability of SNR and STR readings in vdr but didn't found
> > > relevant information to go further with the voltage moding. If
> > > can give me a link I will be gratefull
> > See http://www.vdr-wiki.de/wiki/index.php/SpannungsMod
> > I applied the first solution (loesung 1: original hauppauge):
> > - remove coil connected to pin 14 of the tuner
> > - connect tuner pin 14 with pin 4 (or pin 6)
> Oops, the coil is _located_ at pin 14, but _connected_ to pin 13!
> So it should read:
> - remove coil connected to pin 13 of the tuner
> - connect tuner pin 13 with pin 4 (or pin 6)
So for me german to english translation put some problems. I need to
understand exactly what I am doing. On pin 13 is voltage from computer 5v
powersupply over a small LC filter. What is on pin 4 or 6 ?
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the vdr