[vdr] [1.3.40] Fast channel switching resets

Wolfgang Fritz wolfgang.fritz at gmx.net
Sun Jan 22 20:36:05 CET 2006


Udo Richter wrote:
>> - Switching channels with the Up/Down or Channel+/Channel- keys now works a lot
>>   faster when the repeat function kicks in, by not actually switching the
>>   channel every time, but rather only displaying the channel info and doing
>>   the final switch when the key is released.
> 
> Nice idea, but not working for me.
> 
> If I hold down ChUp on my remote, VDR just goes one channel up. Then, 
> the repeat kicks in and the channel number counts up rapidly, but resets 
> to the current channel after 10-40 channels (1-2 seconds), then starts 
> counting up again. No channel switches after the first one in log files.
> After releasing ChUp, the final channel switch happens, to the channel 
> that was shown at that time.
> 

I have as similar problem. On some channels, the repeat toggles between
the next and the original channel. Starting from other channels, it is
working better, but at some position, it switches back to the original
channel and the sequence restarts.

If that matters, the repeat frequency of my keyboard is quite fast,
about 2-3 events per second.

> With keyboard, the ChUp is waaay slower, but works. From the logs, each 
> channel is switched separately, just as without repeat.
>

Didn't test this (no keyboard connected).

> Remote support is based on remote-0.3.3, keyboard support is 
> VDR-builtin. No other plugins loaded.
> 

For me it's remote-0.3.4 plus some other plugins.

Regards,

Wolfgang

> Cheers,
> 
> Udo
> 
> 
> _______________________________________________
> vdr mailing list
> vdr at linuxtv.org
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
> 





More information about the vdr mailing list