[vdr] Which DVB-T

Torgeir Veimo torgeir at pobox.com
Thu Jan 26 03:38:44 CET 2006


On Thu, 2006-01-26 at 00:55 +0200, Marko Mäkelä wrote:
> Apparently, the bundled IR receiver module does not work with 3.3 volt
> supply.  So, the Hauppauge guys chose to drop the 5 volts from the PCI
> bus by R47 (49.9 ohms) to something like 4.1 volts, so that the cheap
> IR receiver will still work and not kill the I/O pin on the cx23882.
> 
> Next step for me is to get a 3.3 volt capable IR receiver and connect
> my hardware to the 3.3Vaux and PME# lines on the PCI bus. 

Do you know any drop-in replacement modules? I've always though the
bundled one had too low sensitivity as well.

-- 
Torgeir Veimo <torgeir at pobox.com>




More information about the vdr mailing list