[vdr] ERROR: video data stream broken on second dvb card , but szap works (include recording)

Dieter Bloms dieter at bloms.de
Sat Feb 10 17:19:02 CET 2007


Hi,

On Sat, Feb 10, Reinhard Nissl wrote:

> szap always sends DiSEqC commands, so I'd suggest to use VDR's
> diseqc.conf. It's default section "Full DiSEqC sequence" is identical to
> the tuning sequence that szap uses.
> 
> You may want to try the attached szap and VDR patch. You'll then get
> some output while tuning.

doesn't my driver or card support diseqc ?

--snip
video:/tmp/szap # szap  -a 1 -p -i
reading channels from file '/root/.szap/channels.conf'

>>> RTL Television,RTL;RTL World
zapping to 5 'RTL Television,RTL;RTL World':
sat 0, frequency = 12187 MHz H, symbolrate 27500000, vpid = 0x00a3, apid = 0x0068 sid = 0x0069
using '/dev/dvb/adapter1/frontend0' and '/dev/dvb/adapter1/demux0'
FE_DISEQC_SEND_MASTER_CMD failed: Unknown error 524
FE_DISEQC_SEND_BURST failed: Operation not supported
couldn't find pmt-pid for sid 0069
status 1f | signal f700 | snr ffdc | ber 00000000 | unc 00000000 | FE_HAS_LOCK

>>> SAT.1;ProSiebenSat.1
zapping to 6 'SAT.1;ProSiebenSat.1':
sat 0, frequency = 12480 MHz V, symbolrate 27500000, vpid = 0x06ff, apid = 0x0700 sid = 0x0022
FE_DISEQC_SEND_MASTER_CMD failed: Unknown error 524
FE_DISEQC_SEND_BURST failed: Operation not supported
couldn't find pmt-pid for sid 0022
status 1f | signal fb00 | snr ffdc | ber 00000000 | unc 00000000 | FE_HAS_LOCK
--snip--


-- 
Gruß

  Dieter

--
I do not get viruses because I do not use MS software.
If you use Outlook then please do not put my email address in your
address-book so that WHEN you get a virus it won't use my address in the
From field.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 189 bytes
Desc: not available
Url : http://www.linuxtv.org/pipermail/vdr/attachments/20070210/18332e72/attachment.pgp


More information about the vdr mailing list