[vdr] pvrinput radio - need analogradio??

[Simon Baxter]

It looks like this plugin does something wrong with the analog radio on
the OEM PVR-150 card.

With channels.conf set to:
Radio 91ZM:90900:I999C0:C:0:0:300:305:A1:12003:1:1007:0

v4l2-ctl --all   looks like this:

Audio input : 0 (Tuner 1)
Frequency: 1454 (90.875000 MHz)
Video standard = 0x000000ff
        PAL-B/B1/G/H/I/D/D1/K
Tuner:
        Capabilities         : 62.5 kHz multi-standard
        Frequency range      : 44.0 MHz - 958.0 MHz
        Signal strength      : 0%
        Current audio mode   : mono
        Available subchannels:


Where ivtv-radio -f90   looks like this:

Audio input : 0 (Tuner 1)
Frequency: 1454400 (90.900000 MHz)
Video standard = 0x000000ff
        PAL-B/B1/G/H/I/D/D1/K
Tuner:
        Capabilities         : 62.5 Hz stereo
        Frequency range      : 65.0 MHz - 108.0 MHz
        Signal strength      : 50%
        Current audio mode   : stereo
        Available subchannels: stereo


it appears pvrinput isn't setting the right audio mode/sub channels etc??


Any ideas?

PS.  It looks like analogradio  plugin is no longer supported?  Is also
doesn't support ALSA.

?

> I've asked this before, last year, but never had a response.
>
> How do I configure radio channels in VDR.
>
> My channels.conf has:
>
> Classic Hits:90000:I999C0:C:0:0:300:305:A1:12003:1:1006:0
>
> But I think I'm picking up the wrong device, as I hear no audio.  I have a
> single PVR-150 with ivtv and the following devices:
>
> /dev/video0
> /dev/video24
> /dev/video32
>
> When I do a 'ivtv-radio -f90000' I see:
> aplay -f dat < /dev/video24    #which works
>
> So....what should my Parameters be??
>
>   C0   - Input 0
>   C12  - Input 1
>   C23  - Input 2
>   C34  - Input 3
>   C45  - Input 4
>   C56  - Input 5
>   C67  - Input 6
>   C78  - Input 7
>   C89  - Input 8
>   C999 - Input 9
>
>
> Thanks - in advance!
>
>
>
> _______________________________________________
> vdr mailing list
> vdr at linuxtv.org
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
>