[vdr] PANIC: watchdog timer expired - exiting

[PLU Dominique]

Hi

Currently, no, the TZ is set to GMT , the solution is to change it but it will 
not resolve entierly the problem, when I shutdown the system, the clock of 
another computer miss many days or year, meaning bios battery is dead and as 
long this battery is not standard (std=cr2032 or equiv) I cannot change it

I was just hoping that the system could first synchronize the system time to 
transponder inside the init phase and after start operation like schedule.
Maybe in future release ? 

By the way, I will follow the recommandation of Udo Richter and going to ntp 
solution if I can adapt to my slack/vdrlive system

Thanks for your help and time 


Le mercredi 6 juin 2007 19:04, Klaus Schmidinger a écrit :
> On 06/05/07 19:47, PLU Dominique wrote:
> > Hi
> >
> > By the way, I have another question about clock and vdr, I have put vdr
> > setting to synchronise time with a specific channel and setup vdr to
> > start on this channel.
> > Unfortunately , when vdr start, the system is never on time, at least
> > there is two hours minus....
>
> Are you sure you have set the correct time zone?
>
> Klaus
>
>
> _______________________________________________
> vdr mailing list
> vdr at linuxtv.org
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr