[vdr] VDR doesn't always switch channel correctly

Maxime Laplante maxime at maximelaplante.com
Thu Nov 8 23:07:46 CET 2007


Hi guys,
 
I'm running VDR 1.4.0 on my CaptiveWorks CW-3000HD FTA receiver.
 
I have a DishPro Twin LNB to receive both Nimiq 1 (91.0W) and Nimiq 2
(82.0W)
There is also a Dish Pro DP34 switch between the receiver and lnb.
 
 
Everything is working good except that sometimes VDR doesn't tune a channel
correctly.
I just get a black screen.
 
Usually when I switch from a channel on one satellite to a channel on
another satellite.
 
I searched the mailing list and found that there may be a patch but this is
not for vdr 1.4.0
check this:
http://212.227.166.180/pipermail/vdr/2005-December/006841.html
 
 
My current diseqc.conf is:
 
# DiseqC Configuration
 
# Port 0 Galaxy 11 & Nimiq 1,3
S91.0W 99999 V 11250 t V W15 [E0 10 38 F2] W20 [E0 10 38 F2] W20
S91.0W 99999 H 14350 t V W15 [E0 10 38 F2] W20 [E0 10 38 F2] W20
S91.0W 99999 R 11250 t V W15 [E0 10 38 F2] W20 [E0 10 38 F2] W20
S91.0W 99999 L 14350 t V W15 [E0 10 38 F2] W20 [E0 10 38 F2] W20
 
# Port 1 Nimiq 2
S82.0W 99999 V 11250 t V W15 [E0 10 38 F6] W20 [E0 10 38 F6] W20
S82.0W 99999 H 14350 t V W15 [E0 10 38 F6] W20 [E0 10 38 F6] W20
S82.0W 99999 R 11250 t V W15 [E0 10 38 F6] W20 [E0 10 38 F6] W20
S82.0W 99999 L 14350 t V W15 [E0 10 38 F6] W20 [E0 10 38 F6] W20
 
 
Thanks,
Maxime
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.linuxtv.org/pipermail/vdr/attachments/20071108/c9cdbd96/attachment.htm 


More information about the vdr mailing list