[vdr] xineliboutput and Switching time
goga777 at bk.ru
Sun Dec 14 08:24:31 CET 2008
> > > Gents, could you please run vdr-sxfe with "--verbose" flag and check if
> > you
> > > see the "prebuffer=" line in console output when you switch the channel?
> > is it possible to use --verbose option for local frontend
> > ./vdr -c /etc/vdr/ -P xineliboutput
> try ./vdr -c /etc/vdr/ -P'xineliboutput --verbose'
I have already tried so , wrong argument
Hereafter you can find the explanation from xineliboutput author
In local mode logging level is controlled by VDR.
Verbose logging is enabled when it is enabled in VDR, as was in your log
> > I couldn't run it with --verbose option
> > I don't use any remote frontends
> > btw - I corrected the my diseqs.conf
> > from
> > S36.0E 00000 V 10750 t v W15 [E0 10 38 F4] W15 t
> > S36.0E 99999 V 10750 t v W15 [E0 10 38 F5] W15 T
> > S36.0E 00000 H 10750 t V W15 [E0 10 38 F6] W15 t
> > S36.0E 99999 H 10750 t V W15 [E0 10 38 F7] W15 T
> > to
> > S36.0E 00000 V 10750 t v [E0 10 38 F4]
> > S36.0E 99999 V 10750 t v [E0 10 38 F5] T
> > S36.0E 00000 H 10750 t V [E0 10 38 F6]
> > S36.0E 99999 H 10750 t V [E0 10 38 F7] T
> I have 8-1 disecq switch that requires 2 commands to be sent (commited and
> uncommited), so my case even more complicated :(
> But I think your change saves about 50 mSec (30 you removed and few more
> that driver add for every command sent).
I will watch on this
More information about the vdr