[vdr] vdr with control plugin and osd

Sebastian Dellit sebo at blinzeln.de
Sun Jan 27 14:26:27 CET 2008


Hello Tobi and all readers,

on Sunday, January 27, 2008 at 2:09:30 PM means Tobi:
> Sebastian Dellit wrote:
>> The options for the control plugin are correct but the
>>   

> Are you sure? The control plug-in must be configured to use the same tty
> as VDR.
> See the KEYB_TTY setting in /etc/default/vdr and the -t option in
> /etc/vdr/plugins/plugin.control.conf.

Thanks for this hint. I add the line

KEYB_TTY=/dev/tty1

after the line

OPTIONS="-w 60"

I also add a line

-t /dev/tty1

in the plugin config file.

When I start the vdr I geht the following error in the syslog:

Jan 27 14:18:12 media vdr: [4068] max. latency time 1 seconds
Jan 27 14:18:12 media vdr: [4082] clearing device because of consecutive poll timeouts
Jan 27 14:18:13 media vdr: [4083] buffer usage: 70% (tid=4082)
Jan 27 14:18:13 media vdr: [4083] buffer usage: 80% (tid=4082)
Jan 27 14:18:14 media vdr: [4083] buffer usage: 90% (tid=4082)
Jan 27 14:18:14 media vdr: [4083] buffer usage: 100% (tid=4082)
Jan 27 14:18:14 media vdr: [4083] ERROR: 1 ring buffer overflow (177 bytes dropped)
Jan 27 14:18:20 media vdr: [4083] ERROR: 16516 ring buffer overflows (3105008 bytes dropped)
Jan 27 14:18:26 media vdr: [4083] ERROR: 20564 ring buffer overflows (3866032 bytes dropped)
[...]

I don't hear audio output from the tv or from my screenreader (suse
blinux). When I stop the vdr with

# /etc/init.de/vdr stop

the stop process takes any secconds. When I restart the vdr with

# /etc/init.de/vdr restart

The audio output works fine but I means that an other vdr is loaded.
:-/ The tty1 isn't mapped by the vdr.
-- 
Best regards Sebastian 
ICQ: 264706583 | MSM: sebo at blinzeln.de | Skype: sebo_de | Yahoo: de_sebo
E-Mail: sebo at blinzeln.de | Web: www.blindzeln.de




More information about the vdr mailing list