[vdr] + DVB-S2 + reelchannelscan 0.6.1 patch for vdr-1.7.0 + h264

Vangelis Nonas vnonas at otenet.gr
Sun Jun 1 03:17:07 CEST 2008


No, the channels I mention are found by reelchannelscan. Are you sure 
the other transponders have contents? Because, neither my box receiver 
can get anything there......  But, I can not see Eurosport HD in my 
installation....., maybe I dont get all Hotbird's beams, I dont know....

Anyway, it is strange you get nothing from reelchannelscan...... I get 
about 1600 servicess.
Using my previous patch (which worked only for DVB-S) did you get any 
channels?

If you scan all of Hotbirds transponders (having removed the S2 at the 
end of the line and with default settings) how many channels do you get?

Thanks
Vagelis

Goga777 wrote:
>> For transponders 11258, 11278 , 11449 I get no channels as well.
>>     
>
> why ?
> (may be this dvb-s2 channel was founded by VDR-scan, not by reelchannelscan ?)
>
>
>   
>> But for 11996 I get:
>> NationalGeo 
>> HD;SkyItalia:11996:VO0S1:S13.0E:27500:163:0;412=ita,413=eng:0:919,93B:11032:64511:6400:0
>> Next 
>> HD;SkyItalia:11996:VO0S1:S13.0E:27500:160:0;400=ita,401=eng:0:919,93B:11030:64511:6400:0
>> SKY Cinema 
>> HD;SkyItalia:11996:VO0S1:S13.0E:27500:161:0;404=ita,405=eng:0:919,93B:11031:64511:6400:0
>> SKY Sport HD 
>> 1;SkyItalia:11996:VO0S1:S13.0E:27500:164:0;416=ita,417=eng:0:919,93B:11020:64511:6400:0
>> SKY Sport HD 
>> 2;SkyItalia:11996:VO0S1:S13.0E:27500:165:0;420=eng,421=ita:0:919,93B:11033:64511:6400:0
>>     
>
>   
>> I also get:
>> HBO HD test;Cyfrowy Polsat 
>> S.A.:12265:VO0S0:S13.0E:27500:401:411=pol;412=pol:0:1803:3105:113:7800:0
>> HD suisse;SRG SSR idee 
>> suisse:12399:HO0S0:S13.0E:27500:180:0;131=deu,132=fra,133=ita,134=eng:0:500:990:318:8500:0
>> Polsat Sport HD test;Cyfrowy Polsat 
>> S.A.:12265:VO0S0:S13.0E:27500:301:311=pol:0:1803:3101:113:7800:0
>>
>> which are HD channels but DVB-S.
>>     
>
> dvb-s channels are not so interesting than dvb-s2  :)
>
>
>   
>> As far as your transponder file, what if you remove S2 from the end of 
>> the line describing the transponder? I have used the original S13.0E.tpl 
>> that I found in an old 0.4.1 package. Anyway, in my code I treat each 
>> transponder as DVB-S and DVB-S2, so try again and post back. This is my 
>> corresponding lines:
>> 1=11258,H,27500,23
>> 2=11278,V,27500,34
>> 3=11449,H,27500,23
>> 4=11996,V,27500,23
>>     
>
> no luck with your variant
>
> [SATTYPE]
> 1=S13.0E
> 2=Hot Bird 6/7A/8 [Ku DVB-S2]
> 3=East
> 4=13.0
>
> [DVB]
> 0=4
> 1=11258,H,27500,23
> 2=11278,V,27500,34
> 3=11449,H,27500,23
> 4=11996,V,27500,23
>
>  debug [scan] Stop Replay Card Number 0  SET DEBUG [scan.c] scanning_on_receiving_device   TRUE
>  DEBUG [channelscan]: loop through  transponders ++++  size 4 ++++++++
>
>  DEBUG [channelscan]: loop through  transponders ++++  size 4 ++++++++
>  DEBUG [channelscan]: scan f: 11258
>  DEBUG [cs]: ScanDVB_S2
>  DEBUG [DVB_S]; trying QPSK: freq: 11258 srate:27500   mod: 0
> 44m DEBUG [DVB_S] - channel: freq: 11258 pol: H  srate:27500   mod: -2147483648
>   debug  [scan] -- NO LOCK @ transponder 111258  mod  -2147483648 fec -2147483648 ----------
>  DEBUG [DVB_S]; trying PSK8: freq: 11258 srate:27500   mod: 8
> 44m DEBUG [DVB_S] - channel: freq: 11258 pol: H  srate:27500   mod: -2147483648
>   debug  [scan] -- NO LOCK @ transponder 111258  mod  -2147483648 fec -2147483648 ----------
>  DEBUG [DVB_S]; trying QPSK_S2: freq: 11258 srate:27500   mod: 4
> 44m DEBUG [DVB_S] - channel: freq: 11258 pol: H  srate:27500   mod: -2147483648
>   debug  [scan] -- NO LOCK @ transponder 111258  mod  -2147483648 fec -2147483648 ----------
>  DEBUG [cs]: ScanDVB_S2
>  DEBUG [DVB_S]; trying QPSK: freq: 11258 srate:27500   mod: 4
> 44m DEBUG [DVB_S] - channel: freq: 11258 pol: H  srate:27500   mod: -2147483648
>   debug  [scan] -- NO LOCK @ transponder 111258  mod  -2147483648 fec -2147483648 ----------
>  DEBUG [DVB_S]; trying PSK8: freq: 11258 srate:27500   mod: 8
> 44m DEBUG [DVB_S] - channel: freq: 11258 pol: H  srate:27500   mod: -2147483648
>   debug  [scan] -- NO LOCK @ transponder 111258  mod  -2147483648 fec -2147483648 ----------
>  DEBUG [DVB_S]; trying QPSK_S2: freq: 11258 srate:27500   mod: 4
> 44m DEBUG [DVB_S] - channel: freq: 11258 pol: H  srate:27500   mod: -2147483648
>   debug  [scan] -- NO LOCK @ transponder 111258  mod  -2147483648 fec -2147483648 ----------
>  DEBUG [channelscan]: scan f: 11278
>  DEBUG [cs]: ScanDVB_S2
>  DEBUG [DVB_S]; trying QPSK: freq: 11278 srate:27500   mod: 0
> 44m DEBUG [DVB_S] - channel: freq: 11278 pol: V  srate:27500   mod: -2147483648
>   debug  [scan] -- NO LOCK @ transponder 211278  mod  -2147483648 fec -2147483648 ----------
>  DEBUG [DVB_S]; trying PSK8: freq: 11278 srate:27500   mod: 8
> 44m DEBUG [DVB_S] - channel: freq: 11278 pol: V  srate:27500   mod: -2147483648
>   debug  [scan] -- NO LOCK @ transponder 211278  mod  -2147483648 fec -2147483648 ----------
>  DEBUG [DVB_S]; trying QPSK_S2: freq: 11278 srate:27500   mod: 4
> 44m DEBUG [DVB_S] - channel: freq: 11278 pol: V  srate:27500   mod: -2147483648
>   debug  [scan] -- NO LOCK @ transponder 211278  mod  -2147483648 fec -2147483648 ----------
>  DEBUG [cs]: ScanDVB_S2
>  DEBUG [DVB_S]; trying QPSK: freq: 11278 srate:27500   mod: 4
> 44m DEBUG [DVB_S] - channel: freq: 11278 pol: V  srate:27500   mod: -2147483648
>   debug  [scan] -- NO LOCK @ transponder 211278  mod  -2147483648 fec -2147483648 ----------
>  DEBUG [DVB_S]; trying PSK8: freq: 11278 srate:27500   mod: 8
> 44m DEBUG [DVB_S] - channel: freq: 11278 pol: V  srate:27500   mod: -2147483648
>   debug  [scan] -- NO LOCK @ transponder 211278  mod  -2147483648 fec -2147483648 ----------
>  DEBUG [DVB_S]; trying QPSK_S2: freq: 11278 srate:27500   mod: 4
> 44m DEBUG [DVB_S] - channel: freq: 11278 pol: V  srate:27500   mod: -2147483648
>   debug  [scan] -- NO LOCK @ transponder 211278  mod  -2147483648 fec -2147483648 ----------
>  DEBUG [channelscan]: scan f: 11449
>  DEBUG [cs]: ScanDVB_S2
>  DEBUG [DVB_S]; trying QPSK: freq: 11449 srate:27500   mod: 0
> 44m DEBUG [DVB_S] - channel: freq: 11449 pol: H  srate:27500   mod: -2147483648
>   debug  [scan] -- NO LOCK @ transponder 111449  mod  -2147483648 fec -2147483648 ----------
>  DEBUG [DVB_S]; trying PSK8: freq: 11449 srate:27500   mod: 8
> 44m DEBUG [DVB_S] - channel: freq: 11449 pol: H  srate:27500   mod: -2147483648
>   debug  [scan] -- NO LOCK @ transponder 111449  mod  -2147483648 fec -2147483648 ----------
>  DEBUG [DVB_S]; trying QPSK_S2: freq: 11449 srate:27500   mod: 4
> 44m DEBUG [DVB_S] - channel: freq: 11449 pol: H  srate:27500   mod: -2147483648
>   debug  [scan] -- NO LOCK @ transponder 111449  mod  -2147483648 fec -2147483648 ----------
>  DEBUG [cs]: ScanDVB_S2
>  DEBUG [DVB_S]; trying QPSK: freq: 11449 srate:27500   mod: 4
> 44m DEBUG [DVB_S] - channel: freq: 11449 pol: H  srate:27500   mod: -2147483648
>   debug  [scan] -- NO LOCK @ transponder 111449  mod  -2147483648 fec -2147483648 ----------
>  DEBUG [DVB_S]; trying PSK8: freq: 11449 srate:27500   mod: 8
> 44m DEBUG [DVB_S] - channel: freq: 11449 pol: H  srate:27500   mod: -2147483648
>   debug  [scan] -- NO LOCK @ transponder 111449  mod  -2147483648 fec -2147483648 ----------
>  DEBUG [DVB_S]; trying QPSK_S2: freq: 11449 srate:27500   mod: 4
> 44m DEBUG [DVB_S] - channel: freq: 11449 pol: H  srate:27500   mod: -2147483648
>   debug  [scan] -- NO LOCK @ transponder 111449  mod  -2147483648 fec -2147483648 ----------
>  DEBUG [channelscan]: scan f: 11996
>  DEBUG [cs]: ScanDVB_S2
>  DEBUG [DVB_S]; trying QPSK: freq: 11996 srate:27500   mod: 0
> 44m DEBUG [DVB_S] - channel: freq: 11996 pol: V  srate:27500   mod: -2147483648
>   debug  [scan] -- NO LOCK @ transponder 211996  mod  -2147483648 fec -2147483648 ----------
>  DEBUG [DVB_S]; trying PSK8: freq: 11996 srate:27500   mod: 8
> 44m DEBUG [DVB_S] - channel: freq: 11996 pol: V  srate:27500   mod: -2147483648
>   debug  [scan] -- NO LOCK @ transponder 211996  mod  -2147483648 fec -2147483648 ----------
>  DEBUG [DVB_S]; trying QPSK_S2: freq: 11996 srate:27500   mod: 4
> 44m DEBUG [DVB_S] - channel: freq: 11996 pol: V  srate:27500   mod: -2147483648
>   debug  [scan] -- NO LOCK @ transponder 211996  mod  -2147483648 fec -2147483648 ----------
>  DEBUG [cs]: ScanDVB_S2
>  DEBUG [DVB_S]; trying QPSK: freq: 11996 srate:27500   mod: 4
> 44m DEBUG [DVB_S] - channel: freq: 11996 pol: V  srate:27500   mod: -2147483648
>   debug  [scan] -- NO LOCK @ transponder 211996  mod  -2147483648 fec -2147483648 ----------
>  DEBUG [DVB_S]; trying PSK8: freq: 11996 srate:27500   mod: 8
> 44m DEBUG [DVB_S] - channel: freq: 11996 pol: V  srate:27500   mod: -2147483648
>   debug  [scan] -- NO LOCK @ transponder 211996  mod  -2147483648 fec -2147483648 ----------
>  DEBUG [DVB_S]; trying QPSK_S2: freq: 11996 srate:27500   mod: 4
> 44m DEBUG [DVB_S] - channel: freq: 11996 pol: V  srate:27500   mod: -2147483648
>   debug  [scan] -- NO LOCK @ transponder 211996  mod  -2147483648 fec -2147483648 ----------
>  --- End of transponderlist. End of scan! Duratation 48 ---
>  Assumed HD Transponders
>
>
> Goga
>
>
>
>
>
>
>
>   
>> Goga777 wrote:
>>     
>>> Приветствую, Vangelis
>>>
>>>
>>> it's my /etc/vdr/plugins/transponders/S13.0E.tpl (only dvb-s2 transponders)
>>>
>>> [SATTYPE]
>>> 1=S13.0E
>>> 2=Hot Bird 6/7A/8 [Ku DVB-S2]
>>> 3=East
>>> 4=13.0
>>>
>>> [DVB]
>>> 0=4
>>> 1=11258,H,27500,23,S2
>>> 2=11278,V,27500,23,S2
>>> 3=11449,H,27500,23,S2
>>> 4=11996,V,27500,23,S2
>>>
>>>
>>> I have tested in Auto mode - and without any LOCK on dvb-s2 channels :(
>>>
>>> May 31 23:02:55 localhost vdr: [4645] INFO [channelscan]: Please update Transponder lists
>>> May 31 23:02:55 localhost vdr: [4645] INFO [channelscan]: Please update Transponder lists
>>> May 31 23:02:55 localhost vdr: [4645] ERROR: [channelscan] in   :  no values for "S13.0E"
>>> May 31 23:02:55 localhost vdr: [4645] ERROR: [channelscan] can`t open
>>> LoadSatTpls /etc/vdr//plugins/transponders/S13.0E.tpl. bz2 --- try uncompressed
>>> May 31 23:02:55 localhost vdr: [4645] virtual eOSState cMenuChannelscan::ProcessKey(eKeys) freq=1 scanMode=1
>>> May 31 23:02:55 localhost vdr: [4645] virtual eOSState cMenuChannelscan::ProcessKey(eKeys) ssGetChannels?=0
>>> May 31 23:02:55 localhost vdr: [4645] cMenuScanActive::cMenuScanActive(cScanParameters*) ssGetChannels?=0
>>> May 31 23:02:55 localhost last message repeated 2 times
>>> May 31 23:02:55 localhost vdr: [4645]  start Scanning @ Card 0 ---
>>> May 31 23:02:55 localhost vdr: [6535] transfer thread ended (pid=4645, tid=6535)
>>> May 31 23:02:55 localhost vdr: [4645] buffer stats: 0 (0%) used
>>> May 31 23:02:55 localhost vdr: [4645] cMenuScanActive::cMenuScanActive(cScanParameters*) ssGetChannels?=1
>>> May 31 23:02:55 localhost vdr: [6613] maxmods = 3
>>> May 31 23:02:55 localhost vdr: [4645] cMenuScanActive::cMenuScanActive(cScanParameters*) ssGetChannels?=1
>>> May 31 23:02:55 localhost vdr: [6537] TS buffer on device 1 thread ended (pid=4645, tid=6537)
>>> May 31 23:02:55 localhost vdr: [6536] buffer stats: 0 (0%) used
>>> May 31 23:02:55 localhost vdr: [6536] receiver on device 1 thread ended (pid=4645, tid=6536)
>>> May 31 23:02:57 localhost kernel: dvb_frontend_ioctl: FESTATE_RETUNE: fepriv->state=2
>>> May 31 23:02:57 localhost vdr: [6613]  debug  [channelscan] ------ NO LOCK after 2000ms @ transponder 111258
>>> ------------- May 31 23:03:01 localhost last message repeated 2 times
>>> May 31 23:03:01 localhost vdr: [6613] maxmods = 3
>>> May 31 23:03:02 localhost vdr: [4654] ERROR (dvbdevice.c,302): Invalid argument
>>> May 31 23:03:02 localhost kernel: dvb_frontend_ioctl: FESTATE_RETUNE: fepriv->state=2
>>> May 31 23:03:03 localhost vdr: [6613]  debug  [channelscan] ------ NO LOCK after 2000ms @ transponder 111258
>>> ------------- May 31 23:03:07 localhost last message repeated 2 times
>>> May 31 23:03:07 localhost vdr: [6613] maxmods = 3
>>> May 31 23:03:07 localhost kernel: dvb_frontend_ioctl: FESTATE_RETUNE: fepriv->state=2
>>> May 31 23:03:09 localhost vdr: [6613]  debug  [channelscan] ------ NO LOCK after 2000ms @ transponder 211278
>>> ------------- May 31 23:03:13 localhost last message repeated 2 times
>>> May 31 23:03:13 localhost vdr: [6613] maxmods = 3
>>> May 31 23:03:15 localhost vdr: [4654] ERROR (dvbdevice.c,302): Invalid argument
>>> May 31 23:03:15 localhost kernel: dvb_frontend_ioctl: FESTATE_RETUNE: fepriv->state=2
>>> May 31 23:03:15 localhost vdr: [6613]  debug  [channelscan] ------ NO LOCK after 2000ms @ transponder 211278
>>> ------------- May 31 23:03:19 localhost last message repeated 2 times
>>> May 31 23:03:19 localhost vdr: [6613] maxmods = 3
>>> May 31 23:03:19 localhost kernel: dvb_frontend_ioctl: FESTATE_RETUNE: fepriv->state=2
>>> May 31 23:03:21 localhost vdr: [6613]  debug  [channelscan] ------ NO LOCK after 2000ms @ transponder 111449
>>> ------------- May 31 23:03:25 localhost last message repeated 2 times
>>> May 31 23:03:25 localhost vdr: [6613] maxmods = 3
>>> May 31 23:03:27 localhost vdr: [4654] ERROR (dvbdevice.c,302): Invalid argument
>>> May 31 23:03:27 localhost kernel: dvb_frontend_ioctl: FESTATE_RETUNE: fepriv->state=2
>>> May 31 23:03:27 localhost vdr: [6613]  debug  [channelscan] ------ NO LOCK after 2000ms @ transponder 111449
>>> ------------- May 31 23:03:31 localhost last message repeated 2 times
>>> May 31 23:03:31 localhost vdr: [6613] maxmods = 3
>>>
>>> May 31 23:03:37 localhost last message repeated 2 times
>>> May 31 23:03:37 localhost vdr: [6613] maxmods = 3
>>> May 31 23:03:39 localhost vdr: [4654] ERROR (dvbdevice.c,302): Invalid argument
>>> May 31 23:03:39 localhost kernel: dvb_frontend_ioctl: FESTATE_RETUNE: fepriv->state=2
>>> May 31 23:03:39 localhost vdr: [6613]  debug  [channelscan] ------ NO LOCK after 2000ms @ transponder 211996
>>> ------------- May 31 23:03:43 localhost last message repeated 2 times
>>> May 31 23:03:48 localhost vdr: [4654] frontend 0 timed out while tuning to channel 0, tp 211996
>>> May 31 23:03:48 localhost vdr: [4654] ERROR (dvbdevice.c,302): Invalid argument
>>> May 31 23:03:48 localhost kernel: dvb_frontend_ioctl: FESTATE_RETUNE: fepriv->state=2
>>> May 31 23:03:57 localhost vdr: [4654] ERROR (dvbdevice.c,302): Invalid argument
>>> May 31 23:03:57 localhost kernel: dvb_frontend_ioctl: FESTATE_RETUNE: fepriv->state=2
>>>
>>>
>>> there's some strange warnings - can somebody comment their 
>>>
>>> May 31 23:02:55 localhost vdr: [4645] INFO [channelscan]: Please update Transponder lists
>>> May 31 23:02:55 localhost vdr: [4645] INFO [channelscan]: Please update Transponder lists
>>> May 31 23:02:55 localhost vdr: [4645] ERROR: [channelscan] in   :  no values for "S13.0E"
>>> May 31 23:02:55 localhost vdr: [4645] ERROR: [channelscan] can`t open
>>> LoadSatTpls /etc/vdr//plugins/transponders/S13.0E.tpl. bz2 --- try uncompressed
>>>
>>>
>>> Goga777
>>>
>>>
>>>   
>>>       
>>>> I tested it with automatic scan (dont know if manual scan works). 
>>>> Moreover, I had selected TV+Radio (not HDTV) and the scanner pick up 
>>>> both DVB-S AND DVB-S2 channels. 
>>>>     
>>>>         
>>> I did so with my S13.0E.tpl
>>>
>>>   
>>>       
>>>> I haven't done any more testing with 
>>>> other parameters.  I have Hotbird in my installation  and it picked up 
>>>> in total 1626 services (TV+Radio). Maybe it missed a few (my satellite 
>>>> box gets about 2050, but this number includes data services). Moreover I 
>>>> dont know whether the file with the transponders for Hotbird ( 
>>>> (vdr-video-dir)/plugins/transponders/S13.0E.tpl  ) is updated (maybe it 
>>>> is missing a few transponders.
>>>>     
>>>>         
>>> in attachment you can find updated S13.0E.tpl , but let's test with dvb-s2 version of this file - it can save our time
>>> for dvb-s2 tests
>>>
>>> [SATTYPE]
>>> 1=S13.0E
>>> 2=Hot Bird 6/7A/8 [Ku DVB-S2]
>>> 3=East
>>> 4=13.0
>>>
>>> [DVB]
>>> 0=4
>>> 1=11258,H,27500,23,S2
>>> 2=11278,V,27500,23,S2
>>> 3=11449,H,27500,23,S2
>>> 4=11996,V,27500,23,S2
>>>
>>> (for your information - I can see the open EurosportHD on 13E , and I have the hvr4000 dvb-s2 card)
>>>       
>
>
> _______________________________________________
> vdr mailing list
> vdr at linuxtv.org
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
>
>
>
>   




More information about the vdr mailing list