[vdr] vdr-1.6.0 channel not available

Simon Baxter linuxtv at nzbaxters.com
Sat May 17 01:42:29 CEST 2008


> On 05/08/08 12:12, Simon Baxter wrote:
>>>> OK - I'm getting this:
>>>>
>>>> SetPlayMode: 0
>>>> frame: (0, 0)-(720, 576), zoom: (1.05, 1.01)
>>>> GetDevice 20 0 1 -1
>>>> no device found
>>>>
>>>>
>>>> any ideas?
>>> If it makes any difference, I'm running vdr-1.6.0 with a budget 
>>> TT-1500-C
>>> (with Alpha Multicrypt) and a FF TT-2300-C (also with Alpha Multicrypt).
>>> The card failing on this channel is the FF one (other card is tied up
>>> recording on another transponder)
>>>
>>> only seems to be failing with a single channel - other encrypted 
>>> channels
>>> within the same boquet work fine....
>>>
>>> works:
>>> UKTV;T:674000:C0M64:C:6900:1310+1210:1410=eng:0:606:810:182:8:0
>>>
>>> doesn't work:
>>> Sky
>>> Movies;T:674000:C0M64:C:6900:1301+8190:1401=eng,1501=enm:0:606:801:182:8:0
>>
>> Have tried the 1.6.0-1 patch, still get:
>> SetPlayMode: 0
>> frame: (0, 0)-(720, 576), zoom: (1.05, 1.01)
>> GetDevice 20 0 1 -1
>> no device found
>>
>> with this channel....
>
> Here what you could try:
>
> - swap the CAMs
> - use only one CAM at a time
> - try the CAMs with either of the DVB cards

Hi again

The problem is following the TT-2300-C card, not the cam or smartcard.  And 
it's fine on the TT-1500 Budget card.

It's really weird.  It's only the Movies channel affected, and each time I 
tune to it get about 1 second of picture then "NO SIGNAL".

The "NO SIGNAL" coincides with the "GetDevice" message.


Any ideas? 




More information about the vdr mailing list