[vdr] xineliboutput sxfe / xxmc / via / EPIA ML6000 : great !

Nicolas Huillard nicolas at huillard.net
Tue Nov 25 14:39:19 CET 2008


Frank Schmirler a écrit :
> On Mon, 24 Nov 2008 21:41:54 +0100, Nicolas Huillard wrote
>> This also works around an annoying bug in the (non-upgraded) EPIA 
>> BIOS: the PXE LAN boot does not always initialize the network 
>> interface after a shutdown. One have to unplug power to boot 
>> correctly next time...
> 
> Current via-rhine drivers have a module option to fix this: via-rhine.avoid_D3=1
> For older kernes there's a patch: http://lkml.org/lkml/2004/9/17/242

I was sure it wouldn't hurt to ask on this ML...

Next question : where should I put this ?

https://fcp.surfsite.org/modules/newbb/viewtopic.php?viewmode=thread&topic_id=33621&forum=10&post_id=148956
says I should insert it in the initrd, but it's a bit difficult in my 
case (the same kernel/initrd is shared by many clients)...

I'd try to insert it on the PXE kernel command-line, but it's 
explicitely ignored by the kernel :
ml6000 kernel: Unknown boot option `via_rhine.avoid_D3=1': ignoring
...or implicitely, when I just add "avoid_D3=1" (ie. PXE does not boot 
after the next shutdown)

-- 
NH



More information about the vdr mailing list