[vdr] VDR behaviour with wrong NIT

[Goga777]

> >> And which parameters are the wrong ones?
> > 
> > 
> > these two parameters are wrong 
> >    
> >           Frequency: 18437984 (=  11.95760 GHz) - should be another freq = 12.380 
> >           Kind: 0 (0x00)  [= DVB-S] - should be dvb-s2 
> > 
> > also, no any information about roll off factor, that's why vdr substituted roll off = auto , cx24116 based cards don't
> > understand roll off = auto. 
> > 
> > Goga
> > 
> > 
> >              fixed ('00'): 0 (0x00)
> >              Modulation_type: 2 (0x02)  [= 8PSK]
> >              Symbol_rate: 2506752 (=  26.4000)
> >              FEC_inner: 2 (0x02)  [= 2/3 conv. code rate]
> 
> Well, if VDR is told this is a DVB-S transponder, while in fact it is
> DVB-S2, I'm afraid there's nothing it can do about that.
> 
> Have you tried complaining to the provider?


yes, sure.

Answer from provider  - "please use our official receivers"

@klaus

could you change VDR behaviour if in the NIT the rolloff is missing - is it possible to substitute roll off = 35 instead
of roll off = auto ?




Goga