[vdr] VDR feature request: GotoStoredPosition

martinez at embl.de martinez at embl.de
Sat Apr 25 19:18:07 CEST 2009


As you probably know the rotor plugin is rather buggy by now as it has more
patches than code.
It would be not be necessary if vdr  had an option ´Enable GotoPosition
´
and if enabled it sent the diseqc command E0 31 6B XX which means ´First 
rotor
go to stored position XX´ when changing to a channel on a different sat
position.

This way it would be posible to use an external program such as xdipo (GPL)
 to
store the orbital positions in the first place and then just configure
diseqc.conf for vdr use.

#my diseqc.conf

#S19.2E is the first stored position
S19.2E 11700 V  9750  t v W15 [E0 31 6B 01] W25 [E0 31 6B 01] W15 t
S19.2E  99999 V 10600  t v W15 [E0 31 6B 01] W25 [E0 31 6B 01] W15 T
S19.2E  11700 H  9750  t V W15 [E0 31 6B 01] W25 [E0 31 6B 01] W15 t
S19.2E  99999 H 10600  t V W15 [E0 31 6B 01] W25 [E0 31 6B 01] W15 T

#S13.0E is the second stored position
S13.0E 11700 V  9750  t v W15 [E0 31 6B 02] W25 [E0 31 6B 02] W15 t
S13.0E  99999 V 10600  t v W15 [E0 31 6B 02] W25 [E0 31 6B 02] W15 T
S13.0E  11700 H  9750  t V W15 [E0 31 6B 02] W25 [E0 31 6B 02] W15 t
S13.0E  99999 H 10600  t V W15 [E0 31 6B 02] W25 [E0 31 6B 02] W15 T

#S5.0E is the thirst stored position
S5.0E 11700 V  9750  t v W15 [E0 31 6B 03] W25 [E0 31 6B 03] W15 t
S5.0E  99999 V 10600  t v W15 [E0 31 6B 03] W25 [E0 31 6B 03] W15 T
S5.0E  11700 H  9750  t V W15 [E0 31 6B 03] W25 [E0 31 6B 03] W15 t
S5.0E  99999 H 10600  t V W15 [E0 31 6B 03] W25 [E0 31 6B 03] W15 T

#plugins/rotor.conf
S19.2E = 1
S13.0E = 2
S5.0E = 3



More information about the vdr mailing list