[vdr] VDR feature request: GotoStoredPosition

[Klaus Schmidinger]

On 25.04.2009 19:18, martinez at embl.de wrote:
> As you probably know the rotor plugin is rather buggy by now as it has more
> patches than code.
> It would be not be necessary if vdr  had an option ´Enable GotoPosition
> ´
> and if enabled it sent the diseqc command E0 31 6B XX which means ´First 
> rotor
> go to stored position XX´ when changing to a channel on a different sat
> position.
> 
> This way it would be posible to use an external program such as xdipo (GPL)
>  to
> store the orbital positions in the first place and then just configure
> diseqc.conf for vdr use.
> 
> #my diseqc.conf
> 
> #S19.2E is the first stored position
> S19.2E 11700 V  9750  t v W15 [E0 31 6B 01] W25 [E0 31 6B 01] W15 t
> S19.2E  99999 V 10600  t v W15 [E0 31 6B 01] W25 [E0 31 6B 01] W15 T
> S19.2E  11700 H  9750  t V W15 [E0 31 6B 01] W25 [E0 31 6B 01] W15 t
> S19.2E  99999 H 10600  t V W15 [E0 31 6B 01] W25 [E0 31 6B 01] W15 T
> 
> #S13.0E is the second stored position
> S13.0E 11700 V  9750  t v W15 [E0 31 6B 02] W25 [E0 31 6B 02] W15 t
> S13.0E  99999 V 10600  t v W15 [E0 31 6B 02] W25 [E0 31 6B 02] W15 T
> S13.0E  11700 H  9750  t V W15 [E0 31 6B 02] W25 [E0 31 6B 02] W15 t
> S13.0E  99999 H 10600  t V W15 [E0 31 6B 02] W25 [E0 31 6B 02] W15 T
> 
> #S5.0E is the thirst stored position
> S5.0E 11700 V  9750  t v W15 [E0 31 6B 03] W25 [E0 31 6B 03] W15 t
> S5.0E  99999 V 10600  t v W15 [E0 31 6B 03] W25 [E0 31 6B 03] W15 T
> S5.0E  11700 H  9750  t V W15 [E0 31 6B 03] W25 [E0 31 6B 03] W15 t
> S5.0E  99999 H 10600  t V W15 [E0 31 6B 03] W25 [E0 31 6B 03] W15 T
> 
> #plugins/rotor.conf
> S19.2E = 1
> S13.0E = 2
> S5.0E = 3

What exactly would have to be changed in VDR to do this?

Klaus