[vdr] gotoX patch & vdr 1.7.8

[Goga777]

> > honestly - I don't know because the dish is on the roof of my home - I don't have access to it currently 
> 
> OK, that makes debugging more complicated.

I connected the ampermeter for measure the current in dish cable and found out that no any problem with software - when I
are moving between satellite the current is arising from 120 ma to 200-300 ma. But I don't have lock. I suppose that my
dish installed not so correctly - that's why I should play with altitude and latitude. I will do. 

> > have you ideas about how can I see in the log the disecs commands from vdr to dish ?
> 
> I don't know of logging but it should be with your diseqc.conf as simple
> as:
> 
> tone on/off
> voltage 13/18
> E0
> 10
> 38
> xx
> wait 150 ms
> G becomes
>    voltage 18
>    tone off
>    wait 20ms
>    EO
>    31
>    6E
>    yy
>    zz
>    if repeated
>      wait 20 ms
>      E1
>      31
>      6E
>      yy
>      zz
>   wait dish turn for 100 ms ... 100s (e.g.)
> tone on/off
> voltage 13/18
> 
> Did you have this working with some other vdr setup or set to box?

no, I have only these logs 

Aug 22 20:21:19 arvdr vdr: [3218] DiSEqC GotoX -192 (35008) -> -360 (35176), wait time  1.7s
Aug 22 20:21:22 arvdr vdr: [3218] DiSEqC GotoX done.
Aug 22 20:21:27 arvdr vdr: [3195] warning: Moving dish to 19.2E - 1s
Aug 22 20:21:29 arvdr vdr: [3195] warning: Moving dish to 36.0E - 1s
Aug 22 20:21:31 arvdr vdr: [3218] frontend 0 timed out while tuning to channel 13, tp 112303
Aug 22 20:21:36 arvdr vdr: [3195] switching to channel 14


Goga