[vdr] Prolem with TT s2-3600

Falk Spitzberg post at spitzberg.de
Wed Jul 15 10:28:45 CEST 2009


i am lost with my TT Connect S2-3600. It used to work, but after a
teporary switch to kernel 2.6.30 i can't get it up anymore.

I am back on kernel (SuSE) and the S2-Liplianin driver
package. All modules built fine and are installed correctly. A
FullFeatured card that is also there, works without problems. 

When i connect the USB box, it get the following error:

usb 3-5: new high speed USB device using ehci_hcd and address 2
usb 3-5: configuration #1 chosen from 1 choice
usb 3-5: New USB device found, idVendor=0b48, idProduct=3007
usb 3-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-5: Product: TT-USB2.0
usb 3-5: Manufacturer: TechnoTrend
dvb-usb: found a 'Technotrend TT Connect S2-3600' in warm state.
pctv452e_power_ctrl: 1
dvb-usb: will pass the complete MPEG2 transport stream to the software
DVB: registering new adapter (Technotrend TT Connect S2-3600)
pctv452e: I2C error -121; AA 02  A0 01 14 -> 55 02  A0 00 00.
dvb-usb: MAC address: ffff88013657b0d0
pctv452e_frontend_attach Enter
BUG: unable to handle kernel NULL pointer dereference at
IP: [<ffffffff8049b393>] __mutex_lock_slowpath+0x34/0xa2
PGD 132d59067 PUD 1365b8067 PMD 0
Oops: 0002 [1] SMP
last sysfs
file: /sys/devices/pci0000:00/0000:00:1d.7/usb3/3-5/bmAttributes
Modules linked in: stb0899(N) dvb_usb_pctv452e(N+) dvb_usb(N)
lirc_serial(N) lir
c_dev(N) snd_pcm_oss snd_mixer_oss snd_seq snd_seq_device tun hdshm(N)
 ipv6 cpufreq_conservative cpufreq_userspace cpufreq_powersave
acpi_cpufreq fuse
 loop dm_mod tda8083(N) stv0299(N) ves1x93(N) dvb_ttpci(N) dvb_core(N)
v(N) videodev(N) v4l1_compat(N) v4l2_compat_ioctl32(N) saa7146(N)
videobuf_dma_sg(N) videobuf_core(N) snd_pcm snd_timer ttpci_eeprom(N)
lloc snd_hwdep i2c_i801 snd ohci1394 e1000e button soundcore i2c_core
ieee1394 r
tc_cmos pcspkr intel_agp rtc_core sr_mod rtc_lib cdrom sg uhci_hcd
ehci_hcd sd_m
od crc_t10dif usbcore edd ext3 mbcache jbd fan ide_pci_generic ide_core
ric ahci pata_jmicron libata scsi_mod dock thermal processor thermal_sys
Supported: No
Pid: 3994, comm: modprobe Tainted: G #1
RIP: 0010:[<ffffffff8049b393>]  [<ffffffff8049b393>]
RSP: 0018:ffff880132ca9b90  EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffffffffa03d9708 RCX: 0000000000000002
RDX: 0000000000000000 RSI: ffff880132ca9c18 RDI: ffffffffa03d970c
RBP: ffffffffa03d970c R08: ffff880132ca9ca7 R09: 0000000000000001
R10: 0000000000000000 R11: 0000000000000000 R12: ffff8801385fa740
R13: ffffffffa03d9710 R14: ffffffffa03d96d0 R15: 0000000000000000
FS:  00007f7b741746f0(0000) GS:ffffffff80a40080(0000)
CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 0000000000000000 CR3: 000000013a16f000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process modprobe (pid: 3994, threadinfo ffff880132ca8000, task
Stack:  ffffffffa03d9710 ffff880132ca9cc8 0000000000000000
 ffff880132ca9ca7 ffffffffa03d96d0 0000000000000002 ffff880132ca9c18
 ffffffffa03d96d0 ffffffff8049b33f ffffffffa0190519 0000000000000000
Call Trace:
 [<ffffffff8049b33f>] mutex_lock+0xa/0xb
 [<ffffffffa0190519>] i2c_transfer+0x56/0xd1 [i2c_core]
 [<ffffffffa03d6252>] i2c_read+0x48/0x67 [stb0899]
 [<ffffffffa03d62bf>] Read8Direct+0x4e/0x99 [stb0899]
 [<ffffffffa03d7569>] stb0899_attach+0x139/0x348 [stb0899]
 [<ffffffffa03cfa3a>] pctv452e_frontend_attach+0x5e/0x206
 [<ffffffffa03c8e94>] dvb_usb_adapter_frontend_init+0x33/0xf5 [dvb_usb]
 [<ffffffffa03c89ab>] dvb_usb_device_init+0x4de/0x5c7 [dvb_usb]
 [<ffffffffa00f78e0>] usb_probe_interface+0x1a8/0x1df [usbcore]
 [<ffffffff803e65b7>] really_probe+0xdd/0x1e5
 [<ffffffff803e67a4>] __driver_attach+0x46/0x6d
 [<ffffffff803e5d82>] bus_for_each_dev+0x44/0x78
 [<ffffffff803e5686>] bus_add_driver+0xf4/0x224
 [<ffffffff803e6962>] driver_register+0x9c/0x103
 [<ffffffffa00f7af7>] usb_register_driver+0x7e/0xe0 [usbcore]
 [<ffffffffa019a01b>] pctv452e_usb_init+0x1b/0x5c [dvb_usb_pctv452e]
 [<ffffffff80209041>] _stext+0x41/0x110
 [<ffffffff80260f76>] sys_init_module+0xa0/0x1ba
 [<ffffffff8020bfbb>] system_call_fastpath+0x16/0x1b
 [<00007f7b73cfa76a>] 0x7f7b73cfa76a

Code: 6f 04 53 48 89 fb 48 89 ef 4c 8d 6b 08 48 83 ec 20 65 4c 8b 24 25
00 00 00
 00 e8 03 0d 00 00 48 8b 53 10 4c 89 2c 24 48 89 63 10 <48> 89 22 48 89
54 24 08
 48 83 ca ff 4c 89 64 24 10 48 89 d0 87
RIP  [<ffffffff8049b393>] __mutex_lock_slowpath+0x34/0xa2
 RSP <ffff880132ca9b90>
CR2: 0000000000000000
---[ end trace 2a7a22f5799b2d7c ]---
usb 3-5: USB disconnect, address 2

Any ideas?
Falk Spitzberg
Tel: +49 5242 901626
E-Mail: post at spitzberg.de

More information about the vdr mailing list