[vdr] Prolem with TT s2-3600

Falk Spitzberg post at spitzberg.de
Wed Jul 15 11:39:52 CEST 2009


Am Mittwoch, den 15.07.2009, 11:21 +0200 schrieb Thomas Netousek:
> ich kenn mich zwar nicht aus und darum poste ich es auch nicht auf der mailingliste, aber
> 
> dvb-usb: found a 'Technotrend TT Connect S2-3600' in warm state.
> 
> sagt mir, dass einmal Strom abschalten bei der TT helfen koennte ?!

Glaub mir, das habe ich als erstes probiert. Der Fehler kommt immer,
egal, ob die Box warm- oder kalt gestartet wurde.

Aber trotzdem Danke für den Hinweis.

> 
> Thomas
> 
> 
> 
> Falk Spitzberg wrote:
> > Hello,
> >
> > i am lost with my TT Connect S2-3600. It used to work, but after a
> > teporary switch to kernel 2.6.30 i can't get it up anymore.
> >
> > I am back on kernel 2.6.27.23 (SuSE) and the S2-Liplianin driver
> > package. All modules built fine and are installed correctly. A
> > FullFeatured card that is also there, works without problems. 
> >
> > When i connect the USB box, it get the following error:
> >
> > usb 3-5: new high speed USB device using ehci_hcd and address 2
> > usb 3-5: configuration #1 chosen from 1 choice
> > usb 3-5: New USB device found, idVendor=0b48, idProduct=3007
> > usb 3-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
> > usb 3-5: Product: TT-USB2.0
> > usb 3-5: Manufacturer: TechnoTrend
> > dvb-usb: found a 'Technotrend TT Connect S2-3600' in warm state.
> > pctv452e_power_ctrl: 1
> > dvb-usb: will pass the complete MPEG2 transport stream to the software
> > demuxer.
> > DVB: registering new adapter (Technotrend TT Connect S2-3600)
> > pctv452e: I2C error -121; AA 02  A0 01 14 -> 55 02  A0 00 00.
> > dvb-usb: MAC address: ffff88013657b0d0
> > pctv452e_frontend_attach Enter
> > BUG: unable to handle kernel NULL pointer dereference at
> > 0000000000000000
> > IP: [<ffffffff8049b393>] __mutex_lock_slowpath+0x34/0xa2
> > PGD 132d59067 PUD 1365b8067 PMD 0
> > Oops: 0002 [1] SMP
> > last sysfs
> > file: /sys/devices/pci0000:00/0000:00:1d.7/usb3/3-5/bmAttributes
> > CPU 0
> > Modules linked in: stb0899(N) dvb_usb_pctv452e(N+) dvb_usb(N)
> > lirc_serial(N) lir
> > c_dev(N) snd_pcm_oss snd_mixer_oss snd_seq snd_seq_device tun hdshm(N)
> > af_packet
> >  ipv6 cpufreq_conservative cpufreq_userspace cpufreq_powersave
> > acpi_cpufreq fuse
> >  loop dm_mod tda8083(N) stv0299(N) ves1x93(N) dvb_ttpci(N) dvb_core(N)
> > saa7146_v
> > v(N) videodev(N) v4l1_compat(N) v4l2_compat_ioctl32(N) saa7146(N)
> > snd_hda_intel
> > videobuf_dma_sg(N) videobuf_core(N) snd_pcm snd_timer ttpci_eeprom(N)
> > snd_page_a
> > lloc snd_hwdep i2c_i801 snd ohci1394 e1000e button soundcore i2c_core
> > ieee1394 r
> > tc_cmos pcspkr intel_agp rtc_core sr_mod rtc_lib cdrom sg uhci_hcd
> > ehci_hcd sd_m
> > od crc_t10dif usbcore edd ext3 mbcache jbd fan ide_pci_generic ide_core
> > ata_gene
> > ric ahci pata_jmicron libata scsi_mod dock thermal processor thermal_sys
> > hwmon
> > Supported: No
> > Pid: 3994, comm: modprobe Tainted: G          2.6.27.23-0.1-default #1
> > RIP: 0010:[<ffffffff8049b393>]  [<ffffffff8049b393>]
> > __mutex_lock_slowpath+0x34/
> > 0xa2
> > RSP: 0018:ffff880132ca9b90  EFLAGS: 00010246
> > RAX: 0000000000000000 RBX: ffffffffa03d9708 RCX: 0000000000000002
> > RDX: 0000000000000000 RSI: ffff880132ca9c18 RDI: ffffffffa03d970c
> > RBP: ffffffffa03d970c R08: ffff880132ca9ca7 R09: 0000000000000001
> > R10: 0000000000000000 R11: 0000000000000000 R12: ffff8801385fa740
> > R13: ffffffffa03d9710 R14: ffffffffa03d96d0 R15: 0000000000000000
> > FS:  00007f7b741746f0(0000) GS:ffffffff80a40080(0000)
> > knlGS:0000000000000000
> > CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
> > CR2: 0000000000000000 CR3: 000000013a16f000 CR4: 00000000000006e0
> > DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> > DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
> > Process modprobe (pid: 3994, threadinfo ffff880132ca8000, task
> > ffff8801385fa740)
> > Stack:  ffffffffa03d9710 ffff880132ca9cc8 0000000000000000
> > ffffffffa03d79f0
> >  ffff880132ca9ca7 ffffffffa03d96d0 0000000000000002 ffff880132ca9c18
> >  ffffffffa03d96d0 ffffffff8049b33f ffffffffa0190519 0000000000000000
> > Call Trace:
> >  [<ffffffff8049b33f>] mutex_lock+0xa/0xb
> >  [<ffffffffa0190519>] i2c_transfer+0x56/0xd1 [i2c_core]
> >  [<ffffffffa03d6252>] i2c_read+0x48/0x67 [stb0899]
> >  [<ffffffffa03d62bf>] Read8Direct+0x4e/0x99 [stb0899]
> >  [<ffffffffa03d7569>] stb0899_attach+0x139/0x348 [stb0899]
> >  [<ffffffffa03cfa3a>] pctv452e_frontend_attach+0x5e/0x206
> > [dvb_usb_pctv452e]
> >  [<ffffffffa03c8e94>] dvb_usb_adapter_frontend_init+0x33/0xf5 [dvb_usb]
> >  [<ffffffffa03c89ab>] dvb_usb_device_init+0x4de/0x5c7 [dvb_usb]
> >  [<ffffffffa00f78e0>] usb_probe_interface+0x1a8/0x1df [usbcore]
> >  [<ffffffff803e65b7>] really_probe+0xdd/0x1e5
> >  [<ffffffff803e67a4>] __driver_attach+0x46/0x6d
> >  [<ffffffff803e5d82>] bus_for_each_dev+0x44/0x78
> >  [<ffffffff803e5686>] bus_add_driver+0xf4/0x224
> >  [<ffffffff803e6962>] driver_register+0x9c/0x103
> >  [<ffffffffa00f7af7>] usb_register_driver+0x7e/0xe0 [usbcore]
> >  [<ffffffffa019a01b>] pctv452e_usb_init+0x1b/0x5c [dvb_usb_pctv452e]
> >  [<ffffffff80209041>] _stext+0x41/0x110
> >  [<ffffffff80260f76>] sys_init_module+0xa0/0x1ba
> >  [<ffffffff8020bfbb>] system_call_fastpath+0x16/0x1b
> >  [<00007f7b73cfa76a>] 0x7f7b73cfa76a
> >
> > Code: 6f 04 53 48 89 fb 48 89 ef 4c 8d 6b 08 48 83 ec 20 65 4c 8b 24 25
> > 00 00 00
> >  00 e8 03 0d 00 00 48 8b 53 10 4c 89 2c 24 48 89 63 10 <48> 89 22 48 89
> > 54 24 08
> >  48 83 ca ff 4c 89 64 24 10 48 89 d0 87
> > RIP  [<ffffffff8049b393>] __mutex_lock_slowpath+0x34/0xa2
> >  RSP <ffff880132ca9b90>
> > CR2: 0000000000000000
> > ---[ end trace 2a7a22f5799b2d7c ]---
> > usb 3-5: USB disconnect, address 2
> >
> >
> > Any ideas?
> >   
> 
> 
> _______________________________________________
> vdr mailing list
> vdr at linuxtv.org
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
-- 
Falk Spitzberg
Tel: +49 5242 901626
E-Mail: post at spitzberg.de




More information about the vdr mailing list