[vdr] vdr-1.7.4 and iptv plugin

ua0lnj ua0lnj at bk.ru
Wed Mar 4 21:28:52 CET 2009


Sometimes when change channel I can see normal iptv aprox. 3 sec, but after 
still picture again...
CPU load low.

vdr: [5852] switching to channel 259
vdr: [5971] IPTV streamer thread ended (pid=5852, tid=5971)
vdr: [5970] receiver on device 9 thread ended (pid=5852, tid=5970)
vdr: [5981] receiver on device 9 thread started (pid=5852, tid=5981)
vdr: [5982] IPTV streamer thread started (pid=5852, tid=5982)
vdr: [5984] [softdevice-audio]: Xrun (at least 460.672 ms long)
vdr: [5984] [softdevice-audio]: xrun
vdr: [5983] [VideoOut] reset: sync info: repF = 1, drpF = 0, totF = 30
vdr: [5985] [VideoOut]: resolution changed: W(720 -> 720); H(432 ->576)
vdr: [5985] [VideoOut]: aspect changed (0 -> 0 ; 1.777778 -> 1.333333)
vdr: [5985] [VideoOut]: 720x576 [0,0 720x576] -> 720x576 [90,0 540x576]
vdr: [5985] [dfb] (re)configuring Videolayer to 720 x 576 (720x576)
vdr: [5985] [dfb] creating new surface (stretchBlit)
vdr: [5985] [dfb] surface capabilities for (videoSurface): videoonly, 
interlaced, PixelFormat = 0x00200806
vdr: [5985] [dfb] (re)configured 0x00200806
vdr: [5984] [softdevice-audio]: Xrun (at least 78.842 ms long)
vdr: [5984] [softdevice-audio]: xrun
vdr: [5984] [softdevice-audio]: Xrun (at least 28.733 ms long)
vdr: [5984] [softdevice-audio]: xrun
vdr: [5981] changing pids of channel 259 from 501+501=2:502:0:0 to 
501+501=0:502:0:0
vdr: [5852] retuning due to modification of channel 259
vdr: [5852] switching to channel 259
vdr: [5982] IPTV streamer thread ended (pid=5852, tid=5982)
vdr: [5981] receiver on device 9 thread ended (pid=5852, tid=5981)
vdr: [5986] receiver on device 9 thread started (pid=5852, tid=5986)
vdr: [5987] IPTV streamer thread started (pid=5852, tid=5987)


----- Original Message ----- 
From: "Rolf Ahrenberg" <rahrenbe at cc.hut.fi>
To: "VDR Mailing List" <vdr at linuxtv.org>
Sent: Thursday, March 05, 2009 2:33 AM
Subject: Re: [vdr] vdr-1.7.4 and iptv plugin


> On Wed, 4 Mar 2009, ua0lnj wrote:
>
>> IPTV-0.2.4 plugin not works for me, I can see steel picture only, from 
>> time to time.
>> But on info screen of plugin I can see stream's data.
>
> If you're using an external application (like vlc) to transcode the
> video stream and you see only still pictures, you'll most likely need a
> faster CPU.
>
> BR,
> --
> rofa
>
> _______________________________________________
> vdr mailing list
> vdr at linuxtv.org
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
>
> 




More information about the vdr mailing list