[vdr] strange issue with DVB-S2 and VDPAU

[Goga777]

> After 4 yeras of SD-VDR I tried to move to HD with my VDR box.
> 
> Current hardware:
> Asus M3N78-VM with GF9400
> Athlon BE2350
> TT3200 DVB-S2
> 
> Software:
> Ubuntu 9.04 x86
> S2API drivers from linuxtv.org/hg/v4l-dvb hg
> xine-vdpau
> xine-ui cvs
> plain vdr-1.7.9

are you using vdr-xine plugin 093 or vdr-xineliboutput ? which version ?

> I'm mainly focused on S9.0E source, because I have a Conax subscription 
> for Hello HD package (http://www.lyngsat.com/packages/hello.html)

> 
> After the first install and some finetunings, FTA HD channels (M2HD, Luxe 
> HD) worked well,

what about another FTA channels from 9E - are they working fine ?


 but I had broken image on Hello HD channels (on SD and HD 
> as well, all of them are in DVB-S2 Mpeg4), and log was full with TS 
> continuity error. My channels list was generated with w_scan. 


you can try to scan with patched for s2api reelchannelscan vdr plugin - see my announce in this ML

After a 
> while I realized that if I let vdr to update my channel.conf, all the 
> channels are working fine.
> And then came the disaster. Ubuntu said that 9.10 is available, and I 
> choosed 
> to upgrade. 

it was your fault 


>After the upgrade I had no sound at all on my system. As I 
> saw, many others had this problem with Ubuntu 9.10.

yep

> After a day and a half 
> I managed to fix the sound (compiling alsa, etc), but the "TS continuity 
> error" came back on vdr.
> Since then I tried everything, I reinstalled the dvb drivers, xine-lib, 
> xine-ui, I tried vdr-xine plugin and xineliboutput also, but no luck: i 
> have broken image on Hello HD package.


what about of 5 FTA channels ?

> I also tried to make some records from those channels without any output 
> plugin, and I end up with 0 sized recordings (on other channels 
> recordings are fine), so IMHO this has nothing to do with xine.
> I'm suspecting two things:
> 1. DVB drivers.
> 2. Incorrect channels.conf
> 
> Reinstalling dvb drivers from liplianin did not help, nor various 
> channels.conf's
> 
> One more detail: I have a Kathrein UFS-910 linux receiver. I have two 
> systems on that: the original firmware and Enigma2. If I try my Conax card 
> in the Kathy, everything works well under E2, but in the original firmware 
> I had the same broken image issue as with VDR.
> 
> As I am stuck with this for more than a day, any help or any ideas are 
> welcomed.

show please your channels.conf
try patched vdr-channelscan


Goga