[vdr] FRC - RGB/Scart with the Intel 830 driver

[Thomas Hilber]

On Tue, Sep 08, 2009 at 12:16:30AM +0100, dave cunningham wrote:
> I've finally tried to get this up and running with the patched Intel  
> xserver on a D945GCLF2 atom board (I see from your readme that you've  
> tried this configuration so assume it should work).

right, works very well

> The desktop's working just fine but I'm having problems with XV. When  
> running in a window xv's fine however when I switch to full screen all I  
> get is a blue screen + audio.

probably a xorg.conf configuration issue. Did you use clone mode?
That does not work with interlaced timings. Symptoms are like
the ones you describe.
Attached is a working sample for xorg.conf I use for my D945GCLF2.

- Thomas

-------------- next part --------------
Section "Monitor"
        Identifier   "Monitor0"
        Modeline     "720x576_50i"      13.875   720  744  808  888   576  580  585  625  -hsync -vsync interlace
        Modeline     "800x520_50i"      17.00    800  856  936 1088   520  548  553  625  -hsync -vsync interlace
        ModeLine     "1440x576_50i"     27.75   1440 1488 1609 1769   576  580  585  625  -hsync -vsync interlace
        Modeline     "1368x768_60"      85.86   1368 1440 1584 1800   768  769  772  795  -hsync +vsync
        Modeline     "1600x1200_60"    161.00   1600 1712 1880 2160  1200 1203 1207 1245  -hsync +vsync

        Option       "PreferredMode"    "1440x576_50i"
EndSection

Section "Monitor"
        Identifier   "Monitor1"
        Option       "Ignore" "true"
EndSection

Section "Monitor"
        Identifier   "Monitor2"
        ModeLine     "1440x576_50i"     27.75   1440 1488 1612 1772   576  580  585  625  -hsync -vsync interlace
        Modeline     "1600x1200_50i"    65.92   1600 1696 1864 2131  1200 1203 1207 1238  -hsync +vsync interlace

        Option       "PreferredMode"    "1440x576_50i"
        Option       "Ignore" "true"
EndSection

Section "Device"
        Identifier  "Card0"
        Driver      "intel"

        Option      "monitor-VGA"               "Monitor0"
        Option      "monitor-LVDS"              "Monitor1"
        Option      "monitor-TMDS-1"            "Monitor2"

#        Option      "SyncFields"                "True"
#        Option      "SF_YScaleFineTune"         "0"
#        Option      "SF_YRGB_VPhase"            "0"
#        Option      "SF_UV_VPhase"              "0"
#        Option      "SF_SchedPrio"              "0"
        Option      "SF_Debug"                  "12000"
EndSection

Section "Screen"
        Identifier "Screen0"
        Monitor    "Monitor0"
        Device     "Card0"
        DefaultDepth    24
EndSection