[vdr] USB IR Receiver not loaded when vdr starts on boot

Peter Odéus peter.odeus at gmail.com
Fri Aug 6 08:41:50 CEST 2010


The problem remains. In 9 times out of 10 vdr will fail to start due
to USB IR not being loaded by the time the script "runvdr" chmods the
permissions on input devices.

/dev/input/event[1-4] are being loaded in time, but as I wrote,
/dev/input/event5 (my USB IR) fails to load in time for chmod to be
set correctly.

How do I 1) postpone the execution of the "runvdr" script, set
appropriate permissions in some other way, or otherwise make the
problem disappear?

Any suggestion is welcome

My family loves the VDR-TV but they really hate the forced "open
console to manually start xine, only to realize that VDR did not start
correctly, followed by closing xine window, start vdr manually,
filling in sudo password, and finally start xine manually again."

BR, Peter

On Tue, Apr 20, 2010 at 8:10 PM, Peter Odéus <peter.odeus at gmail.com> wrote:
> Hi,
>
> The script 'runvdr' sets the following access permissions: chmod o+r
> /dev/input/event*
>
> But since the IR receiver on my USB NOVA-T Stick has not loaded to
> /dev/input/event5 when runvdr sets the permissions, vdr refuses to
> start properly when booting the machine.
>
> The error is stated as a "Permission denied" on the remote device
>
> By doing mv /etc/rc2.d/S20vdr /etc/rc2.d/S30vdr the problem goes away.
>
> I'm on Ubuntu Lucid btw.
>
> :D
>
> /Peter Odéus
>



More information about the vdr mailing list