[vdr] Cam not decoding content (VDR 1.6 TT-1500 T CI PCI)

Oliver Schinagl oliver at schinagl.nl
Fri Dec 17 22:18:44 CET 2010


 Ok, i found that i get the debugging from running vdr and piping it
output to a file. I removed the log serial numbers hopefully. I can't
see anything wrong though, i changed from fta, to encrypted channels and
back, also went through the cam menu while on the encrpyted channels.

Do I need to do anything with channels.conf to let it know i have
encrypted channels? I just piped the output from dvbscan to
channels.conf ...

oliver

On 12/17/10 00:36, Oliver Schinagl wrote:
>  I think it's working I got this from my cam in my message:
>
>
> Dec 17 00:24:01 erin vdr: [14866] CAM 1: Menu ------------------
> Dec 17 00:24:01 erin vdr: [14866] CAM 1: 'Conax Conditional Access'
> Dec 17 00:24:01 erin vdr: [14866] CAM 1: 'Main menu'
> Dec 17 00:24:01 erin vdr: [14866] CAM 1: 'Subscription status'
> Dec 17 00:24:01 erin vdr: [14866] CAM 1: 'Event status'
> Dec 17 00:24:01 erin vdr: [14866] CAM 1: 'Tokens status'
> Dec 17 00:24:01 erin vdr: [14866] CAM 1: 'Change CA PIN'
> Dec 17 00:24:01 erin vdr: [14866] CAM 1: 'Maturity Rating'
> Dec 17 00:24:01 erin vdr: [14866] CAM 1: 'Modem Ordering'
> Dec 17 00:24:01 erin vdr: [14866] CAM 1: 'About Conax CA'
> Dec 17 00:24:01 erin vdr: [14866] CAM 1: 'Message'
> Dec 17 00:24:01 erin vdr: [14866] CAM 1: 'Language'
> Dec 17 00:24:01 erin vdr: [14866] CAM 1: 'Loader status'
> Dec 17 00:24:01 erin vdr: [14866] CAM 1: 'Press 'OK' to select; Press
> 'EXIT' to return'
> Dec 17 00:24:02 erin vdr: [14866] max. latency time 3 seconds
> Dec 17 00:24:03 erin vdr: [14866] CAM 1: select 0
> Dec 17 00:24:03 erin vdr: [14866] CAM 1: Menu ------------------
> Dec 17 00:24:03 erin vdr: [14866] CAM 1: 'Conax Conditional Access'
> Dec 17 00:24:03 erin vdr: [14866] CAM 1: 'Subscription status'
> Dec 17 00:24:03 erin vdr: [14866] CAM 1: 'Name:  Digitenne      '
> Dec 17 00:24:03 erin vdr: [14866] CAM 1: 'Start date 01. Dec 2010   01.
> Jan 1990    '
> Dec 17 00:24:03 erin vdr: [14866] CAM 1: 'End date 31. Dec 2010   01.
> Jan 1990    '
> Dec 17 00:24:03 erin vdr: [14866] CAM 1: 'Entitlement 0100000b   01ffffff'
> Dec 17 00:24:03 erin vdr: [14866] CAM 1: 'The First Entitlement'
> Dec 17 00:24:03 erin vdr: [14866] CAM 1: 'The End Entitlement'
> Dec 17 00:24:03 erin vdr: [14866] CAM 1: 'OK - view subscription status'
> Dec 17 00:24:39 erin vdr: [15132] ERROR: no useful data seen within
> 10540220 byte of video stream
> Dec 17 00:27:48 erin vdr: [15132] PES packet shortened to 27080 bytes
> (expected: 53845 bytes)
> Dec 17 00:30:32 erin vdr: [14866] CAM 1: select 4
> Dec 17 00:30:33 erin vdr: [14866] CAM 1: Menu ------------------
> Dec 17 00:30:33 erin vdr: [14866] CAM 1: 'Conax Conditional Access'
> Dec 17 00:30:33 erin vdr: [14866] CAM 1: 'Subscription status'
> Dec 17 00:30:33 erin vdr: [14866] CAM 1: 'Name:  Digitenne      '
> Dec 17 00:30:33 erin vdr: [14866] CAM 1: 'Start date 01. Dec 2010   01.
> Jan 1990    '
> Dec 17 00:30:33 erin vdr: [14866] CAM 1: 'End date 31. Dec 2010   01.
> Jan 1990    '
> Dec 17 00:30:33 erin vdr: [14866] CAM 1: 'Entitlement 0100000b   01ffffff'
> Dec 17 00:30:33 erin vdr: [14866] CAM 1: 'The First Entitlement'
> Dec 17 00:30:33 erin vdr: [14866] CAM 1: 'The End Entitlement'
> Dec 17 00:30:33 erin vdr: [14866] CAM 1: 'OK - view subscription status'
> Dec 17 00:30:33 erin vdr: [14866] [xine..put] OSD bandwidth: 1077562
> bytes/s (8418 kbit/s)
> Dec 17 00:30:34 erin vdr: [14866] CAM 1: Menu ------------------
> Dec 17 00:30:34 erin vdr: [14866] CAM 1: 'Conax Conditional Access'
> Dec 17 00:30:34 erin vdr: [14866] CAM 1: 'Main menu'
> Dec 17 00:30:34 erin vdr: [14866] CAM 1: 'Subscription status'
> Dec 17 00:30:34 erin vdr: [14866] CAM 1: 'Event status'
> Dec 17 00:30:34 erin vdr: [14866] CAM 1: 'Tokens status'
> Dec 17 00:30:34 erin vdr: [14866] CAM 1: 'Change CA PIN'
> Dec 17 00:30:34 erin vdr: [14866] CAM 1: 'Maturity Rating'
> Dec 17 00:30:34 erin vdr: [14866] CAM 1: 'Modem Ordering'
> Dec 17 00:30:34 erin vdr: [14866] CAM 1: 'About Conax CA'
> Dec 17 00:30:34 erin vdr: [14866] CAM 1: 'Message'
> Dec 17 00:30:34 erin vdr: [14866] CAM 1: 'Language'
> Dec 17 00:30:34 erin vdr: [14866] CAM 1: 'Loader status'
> Dec 17 00:30:34 erin vdr: [14866] CAM 1: 'Press 'OK' to select; Press
> 'EXIT' to return'
> Dec 17 00:30:35 erin vdr: [14866] [xine..put] OSD bandwidth: 918770
> bytes/s (7177 kbit/s)
> Dec 17 00:30:35 erin vdr: [14866] CAM 1: select 1
> Dec 17 00:30:36 erin vdr: [14866] CAM 1: Menu ------------------
> Dec 17 00:30:36 erin vdr: [14866] CAM 1: ''
> Dec 17 00:30:36 erin vdr: [14866] CAM 1: 'No Entitlement!'
> Dec 17 00:30:36 erin vdr: [14866] [xine..put] OSD bandwidth: 857737
> bytes/s (6701 kbit/s)
> Dec 17 00:30:37 erin vdr: [14866] CAM 1: Menu ------------------
> Dec 17 00:30:37 erin vdr: [14866] CAM 1: 'Conax Conditional Access'
> Dec 17 00:30:37 erin vdr: [14866] CAM 1: 'Main menu'
> Dec 17 00:30:37 erin vdr: [14866] CAM 1: 'Subscription status'
> Dec 17 00:30:37 erin vdr: [14866] CAM 1: 'Event status'
> Dec 17 00:30:37 erin vdr: [14866] CAM 1: 'Tokens status'
> Dec 17 00:30:37 erin vdr: [14866] CAM 1: 'Change CA PIN'
> Dec 17 00:30:37 erin vdr: [14866] CAM 1: 'Maturity Rating'
> Dec 17 00:30:37 erin vdr: [14866] CAM 1: 'Modem Ordering'
> Dec 17 00:30:37 erin vdr: [14866] CAM 1: 'About Conax CA'
> Dec 17 00:30:37 erin vdr: [14866] CAM 1: 'Message'
> Dec 17 00:30:37 erin vdr: [14866] CAM 1: 'Language'
> Dec 17 00:30:37 erin vdr: [14866] CAM 1: 'Loader status'
> Dec 17 00:30:37 erin vdr: [14866] CAM 1: 'Press 'OK' to select; Press
> 'EXIT' to return'
>
> On 12/16/10 22:19, Oliver Schinagl wrote:
>>  I think this should be it with CI enabled in the source, any easy way I
>> can check this on the binary?
>>
>> Dec 16 22:18:38 erin vdr: [14866] switching to channel 42
>> Dec 16 22:18:38 erin vdr: [15019] transfer thread ended (pid=14866,
>> tid=15019)
>> Dec 16 22:18:38 erin vdr: [14866] buffer stats: 2632 (0%) used
>> Dec 16 22:18:38 erin vdr: [15022] transfer thread started (pid=14866,
>> tid=15022)
>> Dec 16 22:18:38 erin vdr: [15021] TS buffer on device 1 thread ended
>> (pid=14866, tid=15021)
>> Dec 16 22:18:38 erin vdr: [15020] buffer stats: 2256 (0%) used
>> Dec 16 22:18:38 erin vdr: [15020] receiver on device 1 thread ended
>> (pid=14866, tid=15020)
>> Dec 16 22:18:38 erin vdr: [15023] receiver on device 1 thread started
>> (pid=14866, tid=15023)
>> Dec 16 22:18:38 erin vdr: [15024] TS buffer on device 1 thread started
>> (pid=14866, tid=15024)
>> Dec 16 22:18:38 erin vdr: [15025] osdteletext-receiver thread started
>> (pid=14866, tid=15025)
>> Dec 16 22:18:39 erin vdr: [15022] [xine..put] Detected video size 704x576
>> Dec 16 22:18:39 erin vdr: [15022] setting audio track to 1 (0)
>> Dec 16 22:18:43 erin vdr: [14866] switching to channel 64
>> Dec 16 22:18:43 erin vdr: [15022] transfer thread ended (pid=14866,
>> tid=15022)
>> Dec 16 22:18:43 erin vdr: [14866] buffer stats: 49632 (2%) used
>> Dec 16 22:18:43 erin vdr: [15025] osdteletext-receiver thread ended
>> (pid=14866, tid=15025)
>> Dec 16 22:18:43 erin vdr: [15026] transfer thread started (pid=14866,
>> tid=15026)
>> Dec 16 22:18:43 erin vdr: [15024] TS buffer on device 1 thread ended
>> (pid=14866, tid=15024)
>> Dec 16 22:18:43 erin vdr: [15023] buffer stats: 52828 (2%) used
>> Dec 16 22:18:43 erin vdr: [15023] receiver on device 1 thread ended
>> (pid=14866, tid=15023)
>> Dec 16 22:18:43 erin vdr: [15027] receiver on device 1 thread started
>> (pid=14866, tid=15027)
>> Dec 16 22:18:43 erin vdr: [14866] buffer stats: 0 (0%) used
>> Dec 16 22:18:43 erin vdr: [15028] TS buffer on device 1 thread started
>> (pid=14866, tid=15028)
>> Dec 16 22:18:43 erin vdr: [15029] osdteletext-receiver thread started
>> (pid=14866, tid=15029)
>>
>>
>> On 12/16/10 19:31, Simon Baxter wrote:
>>>> Dec 16 17:58:55 erin vdr: [2756] switching to channel 42
>>>> Dec 16 17:58:55 erin vdr: [2884] transfer thread ended (pid=2756,
>>>> tid=2884)
>>>> Dec 16 17:58:55 erin vdr: [2756] buffer stats: 40232 (1%) used
>>>> Dec 16 17:58:55 erin vdr: [2888] transfer thread started (pid=2756,
>>>> tid=2888)
>>>> Dec 16 17:58:55 erin vdr: [2887] osdteletext-receiver thread ended
>>>> (pid=2756, tid=2887)
>>>> Dec 16 17:58:55 erin vdr: [2756] buffer stats: 0 (0%) used
>>>> Dec 16 17:58:55 erin vdr: [2889] osdteletext-receiver thread started
>>>> (pid=2756, tid=2889)
>>>> Dec 16 17:58:56 erin vdr: [2888] [xine..put] Detected video size 704x576
>>>> Dec 16 17:58:56 erin vdr: [2888] setting audio track to 1 (0)
>>>> Dec 16 17:58:59 erin vdr: [2756] switching to channel 64
>>>> Dec 16 17:58:59 erin vdr: [2888] transfer thread ended (pid=2756,
>>>> tid=2888)
>>>> Dec 16 17:58:59 erin vdr: [2756] buffer stats: 75388 (3%) used
>>>> Dec 16 17:58:59 erin vdr: [2889] osdteletext-receiver thread ended
>>>> (pid=2756, tid=2889)
>>>> Dec 16 17:58:59 erin vdr: [2890] transfer thread started (pid=2756,
>>>> tid=2890)
>>>> Dec 16 17:59:00 erin vdr: [2886] TS buffer on device 1 thread ended
>>>> (pid=2756, tid=2886)
>>>> Dec 16 17:59:00 erin vdr: [2885] buffer stats: 78960 (3%) used
>>>> Dec 16 17:59:00 erin vdr: [2885] receiver on device 1 thread ended
>>>> (pid=2756, tid=2885)
>>>> Dec 16 17:59:00 erin vdr: [2891] receiver on device 1 thread started
>>>> (pid=2756, tid=2891)
>>>> Dec 16 17:59:00 erin vdr: [2756] buffer stats: 0 (0%) used
>>>> Dec 16 17:59:00 erin vdr: [2756] creating directory
>>>> /var/cache/osdteletext/T-8720-2213-32
>>>> Dec 16 17:59:00 erin vdr: [2893] TS buffer on device 1 thread started
>>>> (pid=2756, tid=2893)
>>>> Dec 16 17:59:00 erin vdr: [2892] osdteletext-receiver thread started
>>>> (pid=2756, tid=2892)
>>>> Dec 16 17:59:01 erin vdr: [2756] retuning due to modification of
>>>> channel 64
>>>> Dec 16 17:59:01 erin vdr: [2756] switching to channel 64
>>>> Dec 16 17:59:01 erin vdr: [2890] transfer thread ended (pid=2756,
>>>> tid=2890)
>>>> Dec 16 17:59:01 erin vdr: [2756] buffer stats: 39480 (1%) used
>>>> Dec 16 17:59:01 erin vdr: [2894] transfer thread started (pid=2756,
>>>> tid=2894)
>>>> Dec 16 17:59:04 erin vdr: [2756] switching to channel 42
>>>>
>>>>
>>>> any idea why the scrambled stream isn't being decoded?
>>> Have you tried turning on debugging in ci.c?
>>> // Set these to 'true' for debug output:
>>> static bool DumpTPDUDataTransfer = false;
>>> static bool DebugProtocol = false;
>>> static bool DumpPolls = false;
>>> static bool DumpDateTime = false;
>>>
>>>
>>> _______________________________________________
>>> vdr mailing list
>>> vdr at linuxtv.org
>>> http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
>> _______________________________________________
>> vdr mailing list
>> vdr at linuxtv.org
>> http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
> _______________________________________________
> vdr mailing list
> vdr at linuxtv.org
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr



More information about the vdr mailing list