[vdr] Hauppauge PVR-HD and IPTV plugin

Rob Davis rob at davis-family.info
Mon Feb 8 16:53:14 CET 2010


Hi, I have a Hauppauge PVR-HD which works but creating an h264 ts stream 
from a set HD component inputs and does quite a nice job of it.

The ts stream is available on /dev/video0 and a simple cat /dev/video0 
 >file.ts will create a watchable high quality dump..

I have got this working with freevo (after a little hacking) but would 
prefer to get the input into vdr as I can then watch it around the house 
through streaming.

Using vdr-iptv I can get some of the way, but not all of it.. Playing 
around with different options I get either jerky video or ffmpeg just 
stops transcoding after a few seconds, and I'm not sure why...

I can put a 2 minute ts stream somewhere if it would help but I think it 
will decode a file before decoding from /dev/video0

Hauppuage-test;IPTV:1000:IPTV|S0P0|EXT|hauppauge.sh|951:P:0:256:257:0:0:1000:1:1:0


> more /tmp/iptvstream
>
> Script started 951 4321
> Getting new URL
> /dev/video0
> Change Channel to 951 on Cable Box
> starting with node: 1
> node 1: vendor_id = 0x000024a0 model_id = 0x0000ea05
> AV/C Command: 951 = Op1=0x00487C29 Op2=0x00487C25 Op3=0x00487C21
> Streamsvideo.sh PID is 14632
> Streamdev Plugin 951 /dev/video0
> pid of ffmpeg.streamdev 14639
> 14632
> FFmpeg version SVN-r21686, Copyright (c) 2000-2010 Fabrice Bellard, et al.
>   built on Feb  7 2010 22:27:31 with gcc 4.3.3
>   configuration: --prefix=/usr --libdir=/usr/lib --shlibdir=/usr/lib 
> --mandir=/usr/share/man --enable-static --enable-shared 
> --cc=i686-pc-linux-gnu-gcc --d
> isable-debug --disable-ffplay --enable-libx264 --enable-libxvid 
> --disable-indev=oss --disable-indev=jack --disable-outdev=oss 
> --enable-x11grab --enable-pth
> reads --disable-altivec --cpu=athlon-fx --enable-gpl --enable-version3 
> --enable-postproc --enable-avfilter --enable-avfilter-lavf 
> --disable-stripping --ena
> ble-hardcoded-tables --disable-doc
>   libavutil     50. 9. 0 / 50. 9. 0
>   libavcodec    52.52. 0 / 52.52. 0
>   libavformat   52.51. 0 / 52.51. 0
>   libavdevice   52. 2. 0 / 52. 2. 0
>   libavfilter    1.17. 0 /  1.17. 0
>   libswscale     0.10. 0 /  0.10. 0
>   libpostproc   51. 2. 0 / 51. 2. 0
> [mpegts @ 0x807a3a0]max_analyze_duration reached
> [mpegts @ 0x807a3a0]Estimating duration from bitrate, this may be 
> inaccurate
>
> Seems stream 0 codec frame rate differs from container frame rate: 
> 119.88 (120000/1001) -> 59.94 (60000/1001)
> Input #0, mpegts, from '/dev/video0':
>   Duration: N/A, start: 0.387044, bitrate: 169 kb/s
>   Program 1
>     Stream #0.0[0x1011]: Video: h264, yuv420p, 1280x720 [PAR 1:1 DAR 
> 16:9], 59.92 fps, 59.94 tbr, 90k tbn, 119.88 tbc
>     Stream #0.1[0x1100]: Audio: aac, 48000 Hz, 2 channels, s16, 169 kb/s
> [mpegts @ 0x85f2a80]calculated bitrate 2293687 bps, muxrate 2293687 
> bps, sdt every 762, pat/pmt every 152 pkts
> Output #0, mpegts, to 'udp://127.0.0.1:4321?pkt_size=32712':
>     Stream #0.0, 1/90000: Video: mpeg2video, yuv420p, 1280x720 [PAR 
> 1:1 DAR 16:9], 1/25, q=2-31, 2000 kb/s, 90k tbn, 25 tbc
>     Stream #0.1, 1/90000: Audio: mp2, 48000 Hz, 2 channels, s16, 192 kb/s
> Stream mapping:
>   Stream #0.0 -> #0.0
>   Stream #0.1 -> #0.1
> Press [q] to stop encoding
> [h264 @ 0x808eb00]no picture
> [mpegts @ 0x85f2a80]dts < pcr, TS is invalidme=1.25 
> bitrate=3297.2kbits/s dup=0 drop=42    
> frame=  146 fps= 29 q=12.2 size=    1843kB time=5.76 
> bitrate=2645.8kbits/s dup=0 drop=178    
> frame=  178 fps= 29 q=11.7 size=    2178kB time=7.03 
> bitrate=2537.3kbits/s dup=0 drop=244   

Then it just freezes...

Any ideas?
-------------- next part --------------
A non-text attachment was scrubbed...
Name: hauppauge.sh
Type: application/x-sh
Size: 2671 bytes
Desc: not available
URL: <http://www.linuxtv.org/pipermail/vdr/attachments/20100208/aa859209/attachment.sh>


More information about the vdr mailing list