[vdr] Rotor plugin source?

Gianni Jan 23janmed at gmail.com
Sat Feb 16 15:19:45 CET 2013


Hi Teemu,

Try this!

Regards

Gianni


2013/2/14 Timothy D. Lenz <tlenz at vorgon.com>

> I haven't tried the patch, just the plugin. The plugin had some nice
> features that where handy. My rotor isn't even active now. Needs to be
> realigned after replacing a limit switch and I never have much secess
> aligning it. That and there is so little FTA in the US on small dish.
> Hardly worth the effort.
>
>
> On 2/12/2013 11:29 PM, Teemu Suikki wrote:
>
>> Hi,
>>
>> thanks alot! This works very well!
>>
>> Also I think my "section handler delay" patch is not necessary with this
>> gotoxx patch.. At least my delay message appears much later now, so the
>> delay is already in the gotox handling.
>>
>> This GotoX patch is so cleanly integrated to VDR, I think it should be
>> included in the official release? I think all current diseqc motors have
>> gotox functionality, so plugins like rotor(ng) are really unnecessary if
>> gotox works.
>>
>> --
>> Teemu
>>
>> 2013/2/12 Ales Jurik <ajurik at quick.cz <mailto:ajurik at quick.cz>>
>>
>>
>>     On 02/12/2013 12:17 PM, Teemu Suikki wrote:
>>
>>
>>         Hi!
>>
>>         I was trying to find source code for the rotor plugin (not
>>         rotorng)..
>>         all the links seem to be outdated. Anyone have any version?
>>
>>         I'm really only interested in seeing how the GotoX stuff works.
>> I'm
>>         trying to send gotox command from diseqc.conf, but the dish
>>         doesn't move
>>         at all.
>>
>>         I have the Eutelsat diseqc 1.2 specification, but the GotoX stuff
>> is
>>         marked preliminary and they talk only about terrestrial
>>         antennas.. Must
>>         be some difference.
>>
>>         Here's my non-functioning diseqc.conf entry:
>>
>>         #S1.0W - Elevation 17.44, Azimuth 209.62, Motor angle -28.45
>>         S1.0W 11700 V  9750  t W15 [E0 31 6E 0D 07] W15 v t
>>         S1.0W 99999 V 10600  t W15 [E0 31 6E 0D 07] W15 v T
>>         S1.0W 11700 H  9750  t W15 [E0 31 6E 0D 07] W15 V t
>>         S1.0W 99999 H 10600  t W15 [E0 31 6E 0D 07] W15 V T
>>
>>         I actually made a C program that generates these lines for all
>>         visible
>>         satellites. This might be of interest to people who are waiting
>> for
>>         gotox support, if I ever get this working..
>>
>>
>>
>>
>>         ______________________________**___________________
>>         vdr mailing list
>>         vdr at linuxtv.org <mailto:vdr at linuxtv.org>
>>         http://www.linuxtv.org/cgi-__**bin/mailman/listinfo/vdr<http://www.linuxtv.org/cgi-__bin/mailman/listinfo/vdr>
>>
>>         <http://www.linuxtv.org/cgi-**bin/mailman/listinfo/vdr<http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr>
>> >
>>
>>     Hi Teemu,
>>
>>     I'm using the patch based on patch from Seppo Ingalsuo (see
>>     http://patchwork.linuxtv.org/_**_patch/12911/<http://patchwork.linuxtv.org/__patch/12911/>
>>     <http://patchwork.linuxtv.org/**patch/12911/<http://patchwork.linuxtv.org/patch/12911/>>)
>> - this version I'm used
>>
>>     now with vdr-1.7.27 together with yaVDR, but have info that it works
>>     also with later versions. Patch integrate gotoxx into VDR and works
>>     without problems.
>>
>>     Regards,
>>
>>     Ales
>>
>>     ______________________________**___________________
>>     vdr mailing list
>>     vdr at linuxtv.org <mailto:vdr at linuxtv.org>
>>     http://www.linuxtv.org/cgi-__**bin/mailman/listinfo/vdr<http://www.linuxtv.org/cgi-__bin/mailman/listinfo/vdr>
>>
>>     <http://www.linuxtv.org/cgi-**bin/mailman/listinfo/vdr<http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr>
>> >
>>
>>
>>
>>
>> --
>> Teemu Suikki
>> http://www.z-power.fi/
>>
>>
>> ______________________________**_________________
>> vdr mailing list
>> vdr at linuxtv.org
>> http://www.linuxtv.org/cgi-**bin/mailman/listinfo/vdr<http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr>
>>
>>
> ______________________________**_________________
> vdr mailing list
> vdr at linuxtv.org
> http://www.linuxtv.org/cgi-**bin/mailman/listinfo/vdr<http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.linuxtv.org/pipermail/vdr/attachments/20130216/9367cfce/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: rotor-0.1.5-2.zip
Type: application/zip
Size: 70427 bytes
Desc: not available
URL: <http://www.linuxtv.org/pipermail/vdr/attachments/20130216/9367cfce/attachment-0001.zip>


More information about the vdr mailing list