https://www.linuxtv.org/vdrwiki/api.php?action=feedcontributions&user=Wirbel&feedformat=atomVDR Wiki - User contributions [en]2024-03-19T05:06:54ZUser contributionsMediaWiki 1.39.6https://www.linuxtv.org/vdrwiki/index.php?title=Wirbelscan-plugin&diff=6751Wirbelscan-plugin2021-02-20T15:33:46Z<p>Wirbel: </p>
<hr />
<div>==Description==<br />
'''Author: W. Koehler'''<br />
<br />
This plugin scans for channels on<br />
* DVB-T<br />
* DVB-C<br />
* DVB-S/S2<br />
* pvrinput<br />
<br />
==Images==<br />
{|<br />
|[[Image:Wirbelscan-plugin-00.jpg|thumb|none|''channel scan'']]<br />
|}<br />
<br />
==Usage==<br />
* Settings->Plugins->wirbelscan->'''Settings (yellow)'''<br />
* choose scan type:<br />
** DVB-T<br />
** DVB-C<br />
** DVB-S<br />
** pvrinput <br />
* choose country setting (DVB-T, DVB-C and pvrinput) or satellite in case of DVB-S/S2<br />
* choose scan options:<br />
** FTA<br />
** crypted<br />
** TV<br />
** Radio<br />
* use '''OK''' or '''Back''' to get previous menue.<br />
* start scan with '''Start (green)'''. '''NOTE:''' enshure that no timers are on schedule.<br />
<br />
==Notes==<br />
* the plugin is able to work without channels (channels.conf 0 bytes)<br />
* a scan may take up to 30 minutes (or even longer) <br />
** DVB-T ~ 3 min <br />
** DVB-C ~ 25 min (symbolrate=AUTO, QAM=AUTO)<br />
** DVB-C ~ 4,5 min (symbolrate=6900, QAM=64)<br />
** DVB-C ~ 5 min (symbolrate=6900, QAM=256)<br />
** DVB-S ~ 30 min (Astra 19,2E)<br />
** pvrinput ~ 5min <br />
* if DVB-C symbolrate and modulation ('QAM') are known and defined in settings, the scan can be speed up<br />
* signal quality influences scan time and probability to find all channels<br />
* '''some DVB cards need explizit Inversion setting: try "AUTO/OFF" and "AUTO/ON"'''<br />
<br />
==[[SVDRP]] commands==<br />
* since version 0.0.3, ''commands with note 1) since 0.0.5-pre12''<br />
<br />
{| class="wikitable"<br />
|- bgcolor=#efefef<br />
!Parameter<br />
!Description<br />
|-<br />
| '''S_TERR''' || '''Start DVB-T scan.'''<pre>svdrpsend.pl plug wirbelscan s_terr</pre><br />
|-<br />
| '''S_CABL''' || '''Start DVB-C scan.'''<pre>svdrpsend.pl plug wirbelscan s_cabl</pre><br />
|-<br />
| '''S_SAT''' || '''Start DVB-S scan.'''<pre>svdrpsend.pl plug wirbelscan s_sat</pre><br />
|-<br />
| '''S_PVR''' || '''Start PVRx50 scan.'''<pre>svdrpsend.pl plug wirbelscan s_pvr</pre><br />
|-<br />
| '''S_START''' || '''Start scan''' 1)<pre>svdrpsend.pl plug wirbelscan s_start</pre><br />
|-<br />
| '''S_STOP''' || '''Stop scan'''<pre>svdrpsend.pl plug wirbelscan s_stop</pre><br />
|-<br />
| '''SETUP''' ''<verb:log:type:inv_t:inv_c:srate:qam:cidx:sidx:s2:atsc:flags>'' <br />
||'''change plugin setup''' 1)<br />
''verb'' - verbosity (0..5)<br><br />
''log'' - logfile (0=OFF, 1=stdout, 2=syslog)<br><br />
''type'' - scan type (0=DVB-T, 1=DVB-C, 2=DVB-S/S2, 3=pvrinput, 4=pvrinput FM, 5=ATSC)<br><br />
''inv_t'' - DVB-T inversion (0=AUTO/OFF, 1=AUTO/ON)<br><br />
''inv_c'' - DVB-C inversion (0=AUTO/OFF, 1=AUTO/ON)<br><br />
''srate'' - DVB-C Symbolrate (0..15)<br><br />
''qam'' - DVB-C modulation (0=AUTO, 1=QAM64, 2=QAM128, 3=QAM256, 4=ALL)<br><br />
''cidx'' - country list index (Germany = 80)<br><br />
''sidx'' - satellite list index (S19.2E = 6, S23.5E = 8)<br><br />
''s2'' - enable DVB-S2 (0=OFF, 1=ON)<br><br />
''atsc'' - ATSC scan type (0=VSB, 1=QAM, 2=VSB+QAM)<br><br />
''flags'' - bitwise flag of TV=1, RADIO=2, FTA=4, SCRAMBLED=8, HDTV=16<br />
<pre>svdrpsend.pl plug wirbelscan setup 3:1:1:0:0:0:0:80:6:1:0:31</pre><br />
|-<br />
| '''STORE''' || '''Store Setup''' 1) <pre>svdrpsend.pl plug wirbelscan store</pre><br />
|-<br />
| '''LSTC''' || '''List Country IDs''' 1) <pre>svdrpsend.pl plug wirbelscan lstc</pre><br />
|-<br />
| '''LSTS''' || '''List Satellite IDs''' 1) <pre>svdrpsend.pl plug wirbelscan lsts</pre><br />
|-<br />
| '''QUERY''' || '''Query plugin version, setup values, plugin service API''' 1) <pre>svdrpsend.pl plug wirbelscan query</pre><br />
|}<br />
<br />
use ssh/putty or vdradmin, i.e. "plug wirbelscan s_pvr"<br />
<br />
===Parameters===<br />
{| class="wikitable"<br />
|-<br />
!Parameter (short)<br />
!Parameter (long)<br />
!Description<br />
|-<br />
| -p || --use-pvrinput || activate pvrinput support (''default: off''). since 0.0.7<br />
|}<br />
<br />
==Software Requirements==<br />
* pvrinput plugin (only if pvrscan needed)<br />
<br />
==Installation==<br />
* see general [[Plugin Installation]]<br />
<!-- ===Options=== * none--><br />
<!-- ===Patches=== * none. --><br />
<!-- ==Configuration== * as usual. --><br />
<!-- ===Settings=== * Plugin Setup Dialog. --><br />
<!-- ===Parameters=== * none --><br />
<!-- ==Sonstiges== --><br />
<!-- ===Problems=== --><br />
<br />
==Add-Ons==<br />
* opt: Main Menue Entry via [[wirbelscancontrol-plugin]]<br />
<!-- ===Wunschliste=== --><br />
<!-- ===Snapshot=== --><br />
<br />
==Latest Version==<br />
[https://www.gen2vdr.de/wirbel/wirbelscan/vdr-wirbelscan-2021.02.18.tgz Latest Version]<br />
<br />
==Links==<br />
# [https://www.gen2vdr.de/wirbel/wirbelscan/index2.html Homepage]<br />
<br />
[[category:Plugins]]<br />
{{i18n|wirbelscan-plugin}}</div>Wirbelhttps://www.linuxtv.org/vdrwiki/index.php?title=Wirbelscan-plugin&diff=6750Wirbelscan-plugin2020-02-23T15:44:30Z<p>Wirbel: /* Latest Version */</p>
<hr />
<div>==Description==<br />
'''Author: W. Koehler'''<br />
<br />
This plugin scans for channels on<br />
* DVB-T<br />
* DVB-C<br />
* DVB-S/S2<br />
* pvrinput<br />
<br />
==Images==<br />
{|<br />
|[[Image:Wirbelscan-plugin-00.jpg|thumb|none|''channel scan'']]<br />
|}<br />
<br />
==Usage==<br />
* Settings->Plugins->wirbelscan->'''Settings (yellow)'''<br />
* choose scan type:<br />
** DVB-T<br />
** DVB-C<br />
** DVB-S<br />
** pvrinput <br />
* choose country setting (DVB-T, DVB-C and pvrinput) or satellite in case of DVB-S/S2<br />
* choose scan options:<br />
** FTA<br />
** crypted<br />
** TV<br />
** Radio<br />
* use '''OK''' or '''Back''' to get previous menue.<br />
* start scan with '''Start (green)'''. '''NOTE:''' enshure that no timers are on schedule.<br />
<br />
==Notes==<br />
* the plugin is able to work without channels (channels.conf 0 bytes)<br />
* a scan may take up to 30 minutes (or even longer) <br />
** DVB-T ~ 3 min <br />
** DVB-C ~ 25 min (symbolrate=AUTO, QAM=AUTO)<br />
** DVB-C ~ 4,5 min (symbolrate=6900, QAM=64)<br />
** DVB-C ~ 5 min (symbolrate=6900, QAM=256)<br />
** DVB-S ~ 30 min (Astra 19,2E)<br />
** pvrinput ~ 5min <br />
* if DVB-C symbolrate and modulation ('QAM') are known and defined in settings, the scan can be speed up<br />
* signal quality influences scan time and probability to find all channels<br />
* '''some DVB cards need explizit Inversion setting: try "AUTO/OFF" and "AUTO/ON"'''<br />
<br />
==[[SVDRP]] commands==<br />
* since version 0.0.3, ''commands with note 1) since 0.0.5-pre12''<br />
<br />
{| class="wikitable"<br />
|- bgcolor=#efefef<br />
!Parameter<br />
!Description<br />
|-<br />
| '''S_TERR''' || '''Start DVB-T scan.'''<pre>svdrpsend.pl plug wirbelscan s_terr</pre><br />
|-<br />
| '''S_CABL''' || '''Start DVB-C scan.'''<pre>svdrpsend.pl plug wirbelscan s_cabl</pre><br />
|-<br />
| '''S_SAT''' || '''Start DVB-S scan.'''<pre>svdrpsend.pl plug wirbelscan s_sat</pre><br />
|-<br />
| '''S_PVR''' || '''Start PVRx50 scan.'''<pre>svdrpsend.pl plug wirbelscan s_pvr</pre><br />
|-<br />
| '''S_START''' || '''Start scan''' 1)<pre>svdrpsend.pl plug wirbelscan s_start</pre><br />
|-<br />
| '''S_STOP''' || '''Stop scan'''<pre>svdrpsend.pl plug wirbelscan s_stop</pre><br />
|-<br />
| '''SETUP''' ''<verb:log:type:inv_t:inv_c:srate:qam:cidx:sidx:s2:atsc:flags>'' <br />
||'''change plugin setup''' 1)<br />
''verb'' - verbosity (0..5)<br><br />
''log'' - logfile (0=OFF, 1=stdout, 2=syslog)<br><br />
''type'' - scan type (0=DVB-T, 1=DVB-C, 2=DVB-S/S2, 3=pvrinput, 4=pvrinput FM, 5=ATSC)<br><br />
''inv_t'' - DVB-T inversion (0=AUTO/OFF, 1=AUTO/ON)<br><br />
''inv_c'' - DVB-C inversion (0=AUTO/OFF, 1=AUTO/ON)<br><br />
''srate'' - DVB-C Symbolrate (0..15)<br><br />
''qam'' - DVB-C modulation (0=AUTO, 1=QAM64, 2=QAM128, 3=QAM256, 4=ALL)<br><br />
''cidx'' - country list index (Germany = 80)<br><br />
''sidx'' - satellite list index (S19.2E = 6, S23.5E = 8)<br><br />
''s2'' - enable DVB-S2 (0=OFF, 1=ON)<br><br />
''atsc'' - ATSC scan type (0=VSB, 1=QAM, 2=VSB+QAM)<br><br />
''flags'' - bitwise flag of TV=1, RADIO=2, FTA=4, SCRAMBLED=8, HDTV=16<br />
<pre>svdrpsend.pl plug wirbelscan setup 3:1:1:0:0:0:0:80:6:1:0:31</pre><br />
|-<br />
| '''STORE''' || '''Store Setup''' 1) <pre>svdrpsend.pl plug wirbelscan store</pre><br />
|-<br />
| '''LSTC''' || '''List Country IDs''' 1) <pre>svdrpsend.pl plug wirbelscan lstc</pre><br />
|-<br />
| '''LSTS''' || '''List Satellite IDs''' 1) <pre>svdrpsend.pl plug wirbelscan lsts</pre><br />
|-<br />
| '''QUERY''' || '''Query plugin version, setup values, plugin service API''' 1) <pre>svdrpsend.pl plug wirbelscan query</pre><br />
|}<br />
<br />
use ssh/putty or vdradmin, i.e. "plug wirbelscan s_pvr"<br />
<br />
===Parameters===<br />
{| class="wikitable"<br />
|-<br />
!Parameter (short)<br />
!Parameter (long)<br />
!Description<br />
|-<br />
| -p || --use-pvrinput || activate pvrinput support (''default: off''). since 0.0.7<br />
|}<br />
<br />
==Software Requirements==<br />
* pvrinput plugin (only if pvrscan needed)<br />
<br />
==Installation==<br />
* see general [[Plugin Installation]]<br />
<!-- ===Options=== * none--><br />
<!-- ===Patches=== * none. --><br />
<!-- ==Configuration== * as usual. --><br />
<!-- ===Settings=== * Plugin Setup Dialog. --><br />
<!-- ===Parameters=== * none --><br />
<!-- ==Sonstiges== --><br />
<!-- ===Problems=== --><br />
<br />
==Add-Ons==<br />
* opt: Main Menue Entry via [[wirbelscancontrol-plugin]]<br />
<!-- ===Wunschliste=== --><br />
<!-- ===Snapshot=== --><br />
<br />
==Latest Version==<br />
[https://www.gen2vdr.de/wirbel/wirbelscan/vdr-wirbelscan-2018.11.04.tgz Latest Version]<br />
<br />
==Links==<br />
# [https://www.gen2vdr.de/wirbel/wirbelscan/index2.html Homepage]<br />
<br />
[[category:Plugins]]<br />
{{i18n|wirbelscan-plugin}}</div>Wirbelhttps://www.linuxtv.org/vdrwiki/index.php?title=Wirbelscan-plugin&diff=6749Wirbelscan-plugin2020-02-22T12:13:46Z<p>Wirbel: wirbel.htpc-forum.de moved over to www.gen2vdr.de/wirbel ~ 2 years ago, just leaving a redirect, which is gone now.</p>
<hr />
<div>==Description==<br />
'''Author: W. Koehler'''<br />
<br />
This plugin scans for channels on<br />
* DVB-T<br />
* DVB-C<br />
* DVB-S/S2<br />
* pvrinput<br />
<br />
==Images==<br />
{|<br />
|[[Image:Wirbelscan-plugin-00.jpg|thumb|none|''channel scan'']]<br />
|}<br />
<br />
==Usage==<br />
* Settings->Plugins->wirbelscan->'''Settings (yellow)'''<br />
* choose scan type:<br />
** DVB-T<br />
** DVB-C<br />
** DVB-S<br />
** pvrinput <br />
* choose country setting (DVB-T, DVB-C and pvrinput) or satellite in case of DVB-S/S2<br />
* choose scan options:<br />
** FTA<br />
** crypted<br />
** TV<br />
** Radio<br />
* use '''OK''' or '''Back''' to get previous menue.<br />
* start scan with '''Start (green)'''. '''NOTE:''' enshure that no timers are on schedule.<br />
<br />
==Notes==<br />
* the plugin is able to work without channels (channels.conf 0 bytes)<br />
* a scan may take up to 30 minutes (or even longer) <br />
** DVB-T ~ 3 min <br />
** DVB-C ~ 25 min (symbolrate=AUTO, QAM=AUTO)<br />
** DVB-C ~ 4,5 min (symbolrate=6900, QAM=64)<br />
** DVB-C ~ 5 min (symbolrate=6900, QAM=256)<br />
** DVB-S ~ 30 min (Astra 19,2E)<br />
** pvrinput ~ 5min <br />
* if DVB-C symbolrate and modulation ('QAM') are known and defined in settings, the scan can be speed up<br />
* signal quality influences scan time and probability to find all channels<br />
* '''some DVB cards need explizit Inversion setting: try "AUTO/OFF" and "AUTO/ON"'''<br />
<br />
==[[SVDRP]] commands==<br />
* since version 0.0.3, ''commands with note 1) since 0.0.5-pre12''<br />
<br />
{| class="wikitable"<br />
|- bgcolor=#efefef<br />
!Parameter<br />
!Description<br />
|-<br />
| '''S_TERR''' || '''Start DVB-T scan.'''<pre>svdrpsend.pl plug wirbelscan s_terr</pre><br />
|-<br />
| '''S_CABL''' || '''Start DVB-C scan.'''<pre>svdrpsend.pl plug wirbelscan s_cabl</pre><br />
|-<br />
| '''S_SAT''' || '''Start DVB-S scan.'''<pre>svdrpsend.pl plug wirbelscan s_sat</pre><br />
|-<br />
| '''S_PVR''' || '''Start PVRx50 scan.'''<pre>svdrpsend.pl plug wirbelscan s_pvr</pre><br />
|-<br />
| '''S_START''' || '''Start scan''' 1)<pre>svdrpsend.pl plug wirbelscan s_start</pre><br />
|-<br />
| '''S_STOP''' || '''Stop scan'''<pre>svdrpsend.pl plug wirbelscan s_stop</pre><br />
|-<br />
| '''SETUP''' ''<verb:log:type:inv_t:inv_c:srate:qam:cidx:sidx:s2:atsc:flags>'' <br />
||'''change plugin setup''' 1)<br />
''verb'' - verbosity (0..5)<br><br />
''log'' - logfile (0=OFF, 1=stdout, 2=syslog)<br><br />
''type'' - scan type (0=DVB-T, 1=DVB-C, 2=DVB-S/S2, 3=pvrinput, 4=pvrinput FM, 5=ATSC)<br><br />
''inv_t'' - DVB-T inversion (0=AUTO/OFF, 1=AUTO/ON)<br><br />
''inv_c'' - DVB-C inversion (0=AUTO/OFF, 1=AUTO/ON)<br><br />
''srate'' - DVB-C Symbolrate (0..15)<br><br />
''qam'' - DVB-C modulation (0=AUTO, 1=QAM64, 2=QAM128, 3=QAM256, 4=ALL)<br><br />
''cidx'' - country list index (Germany = 80)<br><br />
''sidx'' - satellite list index (S19.2E = 6, S23.5E = 8)<br><br />
''s2'' - enable DVB-S2 (0=OFF, 1=ON)<br><br />
''atsc'' - ATSC scan type (0=VSB, 1=QAM, 2=VSB+QAM)<br><br />
''flags'' - bitwise flag of TV=1, RADIO=2, FTA=4, SCRAMBLED=8, HDTV=16<br />
<pre>svdrpsend.pl plug wirbelscan setup 3:1:1:0:0:0:0:80:6:1:0:31</pre><br />
|-<br />
| '''STORE''' || '''Store Setup''' 1) <pre>svdrpsend.pl plug wirbelscan store</pre><br />
|-<br />
| '''LSTC''' || '''List Country IDs''' 1) <pre>svdrpsend.pl plug wirbelscan lstc</pre><br />
|-<br />
| '''LSTS''' || '''List Satellite IDs''' 1) <pre>svdrpsend.pl plug wirbelscan lsts</pre><br />
|-<br />
| '''QUERY''' || '''Query plugin version, setup values, plugin service API''' 1) <pre>svdrpsend.pl plug wirbelscan query</pre><br />
|}<br />
<br />
use ssh/putty or vdradmin, i.e. "plug wirbelscan s_pvr"<br />
<br />
===Parameters===<br />
{| class="wikitable"<br />
|-<br />
!Parameter (short)<br />
!Parameter (long)<br />
!Description<br />
|-<br />
| -p || --use-pvrinput || activate pvrinput support (''default: off''). since 0.0.7<br />
|}<br />
<br />
==Software Requirements==<br />
* pvrinput plugin (only if pvrscan needed)<br />
<br />
==Installation==<br />
* see general [[Plugin Installation]]<br />
<!-- ===Options=== * none--><br />
<!-- ===Patches=== * none. --><br />
<!-- ==Configuration== * as usual. --><br />
<!-- ===Settings=== * Plugin Setup Dialog. --><br />
<!-- ===Parameters=== * none --><br />
<!-- ==Sonstiges== --><br />
<!-- ===Problems=== --><br />
<br />
==Add-Ons==<br />
* opt: Main Menue Entry via [[wirbelscancontrol-plugin]]<br />
<!-- ===Wunschliste=== --><br />
<!-- ===Snapshot=== --><br />
<br />
==Latest Version==<br />
[http://wirbel.htpc-forum.de/wirbelscan/vdr-wirbelscan-0.0.9.tgz Version 0.0.9]<br />
<br />
==Links==<br />
# [https://www.gen2vdr.de/wirbel/wirbelscan/index2.html Homepage]<br />
<br />
[[category:Plugins]]<br />
{{i18n|wirbelscan-plugin}}</div>Wirbelhttps://www.linuxtv.org/vdrwiki/index.php?title=Wirbelscan-plugin&diff=6584Wirbelscan-plugin2015-01-15T13:02:24Z<p>Wirbel: /* Service Interface */</p>
<hr />
<div>==Description==<br />
'''Author: W. Koehler'''<br />
<br />
This plugin scans for channels on<br />
* DVB-T<br />
* DVB-C<br />
* DVB-S/S2<br />
* pvrinput<br />
<br />
==Images==<br />
{|<br />
|[[Image:Wirbelscan-plugin-00.jpg|thumb|none|''channel scan'']]<br />
|}<br />
<br />
==Usage==<br />
* Settings->Plugins->wirbelscan->'''Settings (yellow)'''<br />
* choose scan type:<br />
** DVB-T<br />
** DVB-C<br />
** DVB-S<br />
** pvrinput <br />
* choose country setting (DVB-T, DVB-C and pvrinput) or satellite in case of DVB-S/S2<br />
* choose scan options:<br />
** FTA<br />
** crypted<br />
** TV<br />
** Radio<br />
* use '''OK''' or '''Back''' to get previous menue.<br />
* start scan with '''Start (green)'''. '''NOTE:''' enshure that no timers are on schedule.<br />
<br />
==Notes==<br />
* the plugin is able to work without channels (channels.conf 0 bytes)<br />
* a scan may take up to 30 minutes (or even longer) <br />
** DVB-T ~ 3 min <br />
** DVB-C ~ 25 min (symbolrate=AUTO, QAM=AUTO)<br />
** DVB-C ~ 4,5 min (symbolrate=6900, QAM=64)<br />
** DVB-C ~ 5 min (symbolrate=6900, QAM=256)<br />
** DVB-S ~ 30 min (Astra 19,2E)<br />
** pvrinput ~ 5min <br />
* if DVB-C symbolrate and modulation ('QAM') are known and defined in settings, the scan can be speed up<br />
* signal quality influences scan time and probability to find all channels<br />
* '''some DVB cards need explizit Inversion setting: try "AUTO/OFF" and "AUTO/ON"'''<br />
<br />
==[[SVDRP]] commands==<br />
* since version 0.0.3, ''commands with note 1) since 0.0.5-pre12''<br />
<br />
{| class="wikitable"<br />
|- bgcolor=#efefef<br />
!Parameter<br />
!Description<br />
|-<br />
| '''S_TERR''' || '''Start DVB-T scan.'''<pre>svdrpsend.pl plug wirbelscan s_terr</pre><br />
|-<br />
| '''S_CABL''' || '''Start DVB-C scan.'''<pre>svdrpsend.pl plug wirbelscan s_cabl</pre><br />
|-<br />
| '''S_SAT''' || '''Start DVB-S scan.'''<pre>svdrpsend.pl plug wirbelscan s_sat</pre><br />
|-<br />
| '''S_PVR''' || '''Start PVRx50 scan.'''<pre>svdrpsend.pl plug wirbelscan s_pvr</pre><br />
|-<br />
| '''S_START''' || '''Start scan''' 1)<pre>svdrpsend.pl plug wirbelscan s_start</pre><br />
|-<br />
| '''S_STOP''' || '''Stop scan'''<pre>svdrpsend.pl plug wirbelscan s_stop</pre><br />
|-<br />
| '''SETUP''' ''<verb:log:type:inv_t:inv_c:srate:qam:cidx:sidx:s2:atsc:flags>'' <br />
||'''change plugin setup''' 1)<br />
''verb'' - verbosity (0..5)<br><br />
''log'' - logfile (0=OFF, 1=stdout, 2=syslog)<br><br />
''type'' - scan type (0=DVB-T, 1=DVB-C, 2=DVB-S/S2, 3=pvrinput, 4=pvrinput FM, 5=ATSC)<br><br />
''inv_t'' - DVB-T inversion (0=AUTO/OFF, 1=AUTO/ON)<br><br />
''inv_c'' - DVB-C inversion (0=AUTO/OFF, 1=AUTO/ON)<br><br />
''srate'' - DVB-C Symbolrate (0..15)<br><br />
''qam'' - DVB-C modulation (0=AUTO, 1=QAM64, 2=QAM128, 3=QAM256, 4=ALL)<br><br />
''cidx'' - country list index (Germany = 80)<br><br />
''sidx'' - satellite list index (S19.2E = 6, S23.5E = 8)<br><br />
''s2'' - enable DVB-S2 (0=OFF, 1=ON)<br><br />
''atsc'' - ATSC scan type (0=VSB, 1=QAM, 2=VSB+QAM)<br><br />
''flags'' - bitwise flag of TV=1, RADIO=2, FTA=4, SCRAMBLED=8, HDTV=16<br />
<pre>svdrpsend.pl plug wirbelscan setup 3:1:1:0:0:0:0:80:6:1:0:31</pre><br />
|-<br />
| '''STORE''' || '''Store Setup''' 1) <pre>svdrpsend.pl plug wirbelscan store</pre><br />
|-<br />
| '''LSTC''' || '''List Country IDs''' 1) <pre>svdrpsend.pl plug wirbelscan lstc</pre><br />
|-<br />
| '''LSTS''' || '''List Satellite IDs''' 1) <pre>svdrpsend.pl plug wirbelscan lsts</pre><br />
|-<br />
| '''QUERY''' || '''Query plugin version, setup values, plugin service API''' 1) <pre>svdrpsend.pl plug wirbelscan query</pre><br />
|}<br />
<br />
use ssh/putty or vdradmin, i.e. "plug wirbelscan s_pvr"<br />
<br />
===Parameters===<br />
{| class="wikitable"<br />
|-<br />
!Parameter (short)<br />
!Parameter (long)<br />
!Description<br />
|-<br />
| -p || --use-pvrinput || activate pvrinput support (''default: off''). since 0.0.7<br />
|}<br />
<br />
==Software Requirements==<br />
* pvrinput plugin (only if pvrscan needed)<br />
<br />
==Installation==<br />
* see general [[Plugin Installation]]<br />
<!-- ===Options=== * none--><br />
<!-- ===Patches=== * none. --><br />
<!-- ==Configuration== * as usual. --><br />
<!-- ===Settings=== * Plugin Setup Dialog. --><br />
<!-- ===Parameters=== * none --><br />
<!-- ==Sonstiges== --><br />
<!-- ===Problems=== --><br />
<br />
==Add-Ons==<br />
* opt: Main Menue Entry via [[wirbelscancontrol-plugin]]<br />
<!-- ===Wunschliste=== --><br />
<!-- ===Snapshot=== --><br />
<br />
==Latest Version==<br />
[http://wirbel.htpc-forum.de/wirbelscan/vdr-wirbelscan-0.0.9.tgz Version 0.0.9]<br />
<br />
==Links==<br />
# [http://wirbel.htpc-forum.de/wirbelscan/index2.html Homepage]<br />
<br />
[[category:Plugins]]<br />
{{i18n|wirbelscan-plugin}}</div>Wirbelhttps://www.linuxtv.org/vdrwiki/index.php?title=Wirbelscan-plugin&diff=6583Wirbelscan-plugin2015-01-15T13:02:00Z<p>Wirbel: /* Latest Version */</p>
<hr />
<div>==Description==<br />
'''Author: W. Koehler'''<br />
<br />
This plugin scans for channels on<br />
* DVB-T<br />
* DVB-C<br />
* DVB-S/S2<br />
* pvrinput<br />
<br />
==Images==<br />
{|<br />
|[[Image:Wirbelscan-plugin-00.jpg|thumb|none|''channel scan'']]<br />
|}<br />
<br />
==Usage==<br />
* Settings->Plugins->wirbelscan->'''Settings (yellow)'''<br />
* choose scan type:<br />
** DVB-T<br />
** DVB-C<br />
** DVB-S<br />
** pvrinput <br />
* choose country setting (DVB-T, DVB-C and pvrinput) or satellite in case of DVB-S/S2<br />
* choose scan options:<br />
** FTA<br />
** crypted<br />
** TV<br />
** Radio<br />
* use '''OK''' or '''Back''' to get previous menue.<br />
* start scan with '''Start (green)'''. '''NOTE:''' enshure that no timers are on schedule.<br />
<br />
==Notes==<br />
* the plugin is able to work without channels (channels.conf 0 bytes)<br />
* a scan may take up to 30 minutes (or even longer) <br />
** DVB-T ~ 3 min <br />
** DVB-C ~ 25 min (symbolrate=AUTO, QAM=AUTO)<br />
** DVB-C ~ 4,5 min (symbolrate=6900, QAM=64)<br />
** DVB-C ~ 5 min (symbolrate=6900, QAM=256)<br />
** DVB-S ~ 30 min (Astra 19,2E)<br />
** pvrinput ~ 5min <br />
* if DVB-C symbolrate and modulation ('QAM') are known and defined in settings, the scan can be speed up<br />
* signal quality influences scan time and probability to find all channels<br />
* '''some DVB cards need explizit Inversion setting: try "AUTO/OFF" and "AUTO/ON"'''<br />
<br />
==[[SVDRP]] commands==<br />
* since version 0.0.3, ''commands with note 1) since 0.0.5-pre12''<br />
<br />
{| class="wikitable"<br />
|- bgcolor=#efefef<br />
!Parameter<br />
!Description<br />
|-<br />
| '''S_TERR''' || '''Start DVB-T scan.'''<pre>svdrpsend.pl plug wirbelscan s_terr</pre><br />
|-<br />
| '''S_CABL''' || '''Start DVB-C scan.'''<pre>svdrpsend.pl plug wirbelscan s_cabl</pre><br />
|-<br />
| '''S_SAT''' || '''Start DVB-S scan.'''<pre>svdrpsend.pl plug wirbelscan s_sat</pre><br />
|-<br />
| '''S_PVR''' || '''Start PVRx50 scan.'''<pre>svdrpsend.pl plug wirbelscan s_pvr</pre><br />
|-<br />
| '''S_START''' || '''Start scan''' 1)<pre>svdrpsend.pl plug wirbelscan s_start</pre><br />
|-<br />
| '''S_STOP''' || '''Stop scan'''<pre>svdrpsend.pl plug wirbelscan s_stop</pre><br />
|-<br />
| '''SETUP''' ''<verb:log:type:inv_t:inv_c:srate:qam:cidx:sidx:s2:atsc:flags>'' <br />
||'''change plugin setup''' 1)<br />
''verb'' - verbosity (0..5)<br><br />
''log'' - logfile (0=OFF, 1=stdout, 2=syslog)<br><br />
''type'' - scan type (0=DVB-T, 1=DVB-C, 2=DVB-S/S2, 3=pvrinput, 4=pvrinput FM, 5=ATSC)<br><br />
''inv_t'' - DVB-T inversion (0=AUTO/OFF, 1=AUTO/ON)<br><br />
''inv_c'' - DVB-C inversion (0=AUTO/OFF, 1=AUTO/ON)<br><br />
''srate'' - DVB-C Symbolrate (0..15)<br><br />
''qam'' - DVB-C modulation (0=AUTO, 1=QAM64, 2=QAM128, 3=QAM256, 4=ALL)<br><br />
''cidx'' - country list index (Germany = 80)<br><br />
''sidx'' - satellite list index (S19.2E = 6, S23.5E = 8)<br><br />
''s2'' - enable DVB-S2 (0=OFF, 1=ON)<br><br />
''atsc'' - ATSC scan type (0=VSB, 1=QAM, 2=VSB+QAM)<br><br />
''flags'' - bitwise flag of TV=1, RADIO=2, FTA=4, SCRAMBLED=8, HDTV=16<br />
<pre>svdrpsend.pl plug wirbelscan setup 3:1:1:0:0:0:0:80:6:1:0:31</pre><br />
|-<br />
| '''STORE''' || '''Store Setup''' 1) <pre>svdrpsend.pl plug wirbelscan store</pre><br />
|-<br />
| '''LSTC''' || '''List Country IDs''' 1) <pre>svdrpsend.pl plug wirbelscan lstc</pre><br />
|-<br />
| '''LSTS''' || '''List Satellite IDs''' 1) <pre>svdrpsend.pl plug wirbelscan lsts</pre><br />
|-<br />
| '''QUERY''' || '''Query plugin version, setup values, plugin service API''' 1) <pre>svdrpsend.pl plug wirbelscan query</pre><br />
|}<br />
<br />
use ssh/putty or vdradmin, i.e. "plug wirbelscan s_pvr"<br />
<br />
===Parameters===<br />
{| class="wikitable"<br />
|-<br />
!Parameter (short)<br />
!Parameter (long)<br />
!Description<br />
|-<br />
| -p || --use-pvrinput || activate pvrinput support (''default: off''). since 0.0.7<br />
|}<br />
<br />
==Service Interface==<br />
* since 0.0.5-pre12 supports wirbelscan a service interface, so that external plugins remotely control each feature of wirbelscan. For details see [http://wirbel.htpc-forum.de/wirbelscan/SERVICES.html SERVICES.html]. So far tzhe following is supported:<br />
** Ask Plugin Version and Service API<br />
***''NOTE:''Service API Version of wirbelscan and external Plugin have to fit.<br />
** Commands<br />
***Start Scan<br />
***Stop Scan<br />
***store setup<br />
** Actual status information<br />
***Scanning/Stopped/Busy<br />
***Name of DVB device used<br />
***Progress in % of predefined transponders<br />
***Signal strength as reported by dvb device<br />
***Actual transponder<br />
***sum count channels<br />
***count new channels<br />
**Set and query all setup parameters<br />
**query known country IDs and Names<br />
***ID (ATSC/DVB-C/DVB-T)<br />
***short name<br />
***full Name<br />
**query known satellites, IDs and Names<br />
***ID (DVB-S/S2)<br />
***short name<br />
***full name<br />
<br />
a sample plugin is [http://wirbel.htpc-forum.de/wirbelscan/vdr-servdemo-0.0.1.tgz here]. To use the service API an ''#include "../wirbelscan/wirbelscan_services.h"'' should be done.<br />
<br />
==Software Requirements==<br />
* pvrinput plugin (only if pvrscan needed)<br />
<br />
==Installation==<br />
* see general [[Plugin Installation]]<br />
<!-- ===Options=== * none--><br />
<!-- ===Patches=== * none. --><br />
<!-- ==Configuration== * as usual. --><br />
<!-- ===Settings=== * Plugin Setup Dialog. --><br />
<!-- ===Parameters=== * none --><br />
<!-- ==Sonstiges== --><br />
<!-- ===Problems=== --><br />
<br />
==Add-Ons==<br />
* opt: Main Menue Entry via [[wirbelscancontrol-plugin]]<br />
<!-- ===Wunschliste=== --><br />
<!-- ===Snapshot=== --><br />
<br />
==Latest Version==<br />
[http://wirbel.htpc-forum.de/wirbelscan/vdr-wirbelscan-0.0.9.tgz Version 0.0.9]<br />
<br />
==Links==<br />
# [http://wirbel.htpc-forum.de/wirbelscan/index2.html Homepage]<br />
<br />
[[category:Plugins]]<br />
{{i18n|wirbelscan-plugin}}</div>Wirbelhttps://www.linuxtv.org/vdrwiki/index.php?title=Wirbelscan-plugin&diff=6582Wirbelscan-plugin2015-01-15T13:01:44Z<p>Wirbel: /* Software Requirements */</p>
<hr />
<div>==Description==<br />
'''Author: W. Koehler'''<br />
<br />
This plugin scans for channels on<br />
* DVB-T<br />
* DVB-C<br />
* DVB-S/S2<br />
* pvrinput<br />
<br />
==Images==<br />
{|<br />
|[[Image:Wirbelscan-plugin-00.jpg|thumb|none|''channel scan'']]<br />
|}<br />
<br />
==Usage==<br />
* Settings->Plugins->wirbelscan->'''Settings (yellow)'''<br />
* choose scan type:<br />
** DVB-T<br />
** DVB-C<br />
** DVB-S<br />
** pvrinput <br />
* choose country setting (DVB-T, DVB-C and pvrinput) or satellite in case of DVB-S/S2<br />
* choose scan options:<br />
** FTA<br />
** crypted<br />
** TV<br />
** Radio<br />
* use '''OK''' or '''Back''' to get previous menue.<br />
* start scan with '''Start (green)'''. '''NOTE:''' enshure that no timers are on schedule.<br />
<br />
==Notes==<br />
* the plugin is able to work without channels (channels.conf 0 bytes)<br />
* a scan may take up to 30 minutes (or even longer) <br />
** DVB-T ~ 3 min <br />
** DVB-C ~ 25 min (symbolrate=AUTO, QAM=AUTO)<br />
** DVB-C ~ 4,5 min (symbolrate=6900, QAM=64)<br />
** DVB-C ~ 5 min (symbolrate=6900, QAM=256)<br />
** DVB-S ~ 30 min (Astra 19,2E)<br />
** pvrinput ~ 5min <br />
* if DVB-C symbolrate and modulation ('QAM') are known and defined in settings, the scan can be speed up<br />
* signal quality influences scan time and probability to find all channels<br />
* '''some DVB cards need explizit Inversion setting: try "AUTO/OFF" and "AUTO/ON"'''<br />
<br />
==[[SVDRP]] commands==<br />
* since version 0.0.3, ''commands with note 1) since 0.0.5-pre12''<br />
<br />
{| class="wikitable"<br />
|- bgcolor=#efefef<br />
!Parameter<br />
!Description<br />
|-<br />
| '''S_TERR''' || '''Start DVB-T scan.'''<pre>svdrpsend.pl plug wirbelscan s_terr</pre><br />
|-<br />
| '''S_CABL''' || '''Start DVB-C scan.'''<pre>svdrpsend.pl plug wirbelscan s_cabl</pre><br />
|-<br />
| '''S_SAT''' || '''Start DVB-S scan.'''<pre>svdrpsend.pl plug wirbelscan s_sat</pre><br />
|-<br />
| '''S_PVR''' || '''Start PVRx50 scan.'''<pre>svdrpsend.pl plug wirbelscan s_pvr</pre><br />
|-<br />
| '''S_START''' || '''Start scan''' 1)<pre>svdrpsend.pl plug wirbelscan s_start</pre><br />
|-<br />
| '''S_STOP''' || '''Stop scan'''<pre>svdrpsend.pl plug wirbelscan s_stop</pre><br />
|-<br />
| '''SETUP''' ''<verb:log:type:inv_t:inv_c:srate:qam:cidx:sidx:s2:atsc:flags>'' <br />
||'''change plugin setup''' 1)<br />
''verb'' - verbosity (0..5)<br><br />
''log'' - logfile (0=OFF, 1=stdout, 2=syslog)<br><br />
''type'' - scan type (0=DVB-T, 1=DVB-C, 2=DVB-S/S2, 3=pvrinput, 4=pvrinput FM, 5=ATSC)<br><br />
''inv_t'' - DVB-T inversion (0=AUTO/OFF, 1=AUTO/ON)<br><br />
''inv_c'' - DVB-C inversion (0=AUTO/OFF, 1=AUTO/ON)<br><br />
''srate'' - DVB-C Symbolrate (0..15)<br><br />
''qam'' - DVB-C modulation (0=AUTO, 1=QAM64, 2=QAM128, 3=QAM256, 4=ALL)<br><br />
''cidx'' - country list index (Germany = 80)<br><br />
''sidx'' - satellite list index (S19.2E = 6, S23.5E = 8)<br><br />
''s2'' - enable DVB-S2 (0=OFF, 1=ON)<br><br />
''atsc'' - ATSC scan type (0=VSB, 1=QAM, 2=VSB+QAM)<br><br />
''flags'' - bitwise flag of TV=1, RADIO=2, FTA=4, SCRAMBLED=8, HDTV=16<br />
<pre>svdrpsend.pl plug wirbelscan setup 3:1:1:0:0:0:0:80:6:1:0:31</pre><br />
|-<br />
| '''STORE''' || '''Store Setup''' 1) <pre>svdrpsend.pl plug wirbelscan store</pre><br />
|-<br />
| '''LSTC''' || '''List Country IDs''' 1) <pre>svdrpsend.pl plug wirbelscan lstc</pre><br />
|-<br />
| '''LSTS''' || '''List Satellite IDs''' 1) <pre>svdrpsend.pl plug wirbelscan lsts</pre><br />
|-<br />
| '''QUERY''' || '''Query plugin version, setup values, plugin service API''' 1) <pre>svdrpsend.pl plug wirbelscan query</pre><br />
|}<br />
<br />
use ssh/putty or vdradmin, i.e. "plug wirbelscan s_pvr"<br />
<br />
===Parameters===<br />
{| class="wikitable"<br />
|-<br />
!Parameter (short)<br />
!Parameter (long)<br />
!Description<br />
|-<br />
| -p || --use-pvrinput || activate pvrinput support (''default: off''). since 0.0.7<br />
|}<br />
<br />
==Service Interface==<br />
* since 0.0.5-pre12 supports wirbelscan a service interface, so that external plugins remotely control each feature of wirbelscan. For details see [http://wirbel.htpc-forum.de/wirbelscan/SERVICES.html SERVICES.html]. So far tzhe following is supported:<br />
** Ask Plugin Version and Service API<br />
***''NOTE:''Service API Version of wirbelscan and external Plugin have to fit.<br />
** Commands<br />
***Start Scan<br />
***Stop Scan<br />
***store setup<br />
** Actual status information<br />
***Scanning/Stopped/Busy<br />
***Name of DVB device used<br />
***Progress in % of predefined transponders<br />
***Signal strength as reported by dvb device<br />
***Actual transponder<br />
***sum count channels<br />
***count new channels<br />
**Set and query all setup parameters<br />
**query known country IDs and Names<br />
***ID (ATSC/DVB-C/DVB-T)<br />
***short name<br />
***full Name<br />
**query known satellites, IDs and Names<br />
***ID (DVB-S/S2)<br />
***short name<br />
***full name<br />
<br />
a sample plugin is [http://wirbel.htpc-forum.de/wirbelscan/vdr-servdemo-0.0.1.tgz here]. To use the service API an ''#include "../wirbelscan/wirbelscan_services.h"'' should be done.<br />
<br />
==Software Requirements==<br />
* pvrinput plugin (only if pvrscan needed)<br />
<br />
==Installation==<br />
* see general [[Plugin Installation]]<br />
<!-- ===Options=== * none--><br />
<!-- ===Patches=== * none. --><br />
<!-- ==Configuration== * as usual. --><br />
<!-- ===Settings=== * Plugin Setup Dialog. --><br />
<!-- ===Parameters=== * none --><br />
<!-- ==Sonstiges== --><br />
<!-- ===Problems=== --><br />
<br />
==Add-Ons==<br />
* opt: Main Menue Entry via [[wirbelscancontrol-plugin]]<br />
<!-- ===Wunschliste=== --><br />
<!-- ===Snapshot=== --><br />
<br />
==Latest Version==<br />
[http://wirbel.htpc-forum.de/wirbelscan/vdr-wirbelscan-0.0.7.tgz Version 0.0.7]<br />
<br />
==Links==<br />
# [http://wirbel.htpc-forum.de/wirbelscan/index2.html Homepage]<br />
<br />
[[category:Plugins]]<br />
{{i18n|wirbelscan-plugin}}</div>Wirbelhttps://www.linuxtv.org/vdrwiki/index.php?title=Wirbelscan-plugin&diff=6581Wirbelscan-plugin2015-01-15T13:01:06Z<p>Wirbel: /* Hardware Requirements */</p>
<hr />
<div>==Description==<br />
'''Author: W. Koehler'''<br />
<br />
This plugin scans for channels on<br />
* DVB-T<br />
* DVB-C<br />
* DVB-S/S2<br />
* pvrinput<br />
<br />
==Images==<br />
{|<br />
|[[Image:Wirbelscan-plugin-00.jpg|thumb|none|''channel scan'']]<br />
|}<br />
<br />
==Usage==<br />
* Settings->Plugins->wirbelscan->'''Settings (yellow)'''<br />
* choose scan type:<br />
** DVB-T<br />
** DVB-C<br />
** DVB-S<br />
** pvrinput <br />
* choose country setting (DVB-T, DVB-C and pvrinput) or satellite in case of DVB-S/S2<br />
* choose scan options:<br />
** FTA<br />
** crypted<br />
** TV<br />
** Radio<br />
* use '''OK''' or '''Back''' to get previous menue.<br />
* start scan with '''Start (green)'''. '''NOTE:''' enshure that no timers are on schedule.<br />
<br />
==Notes==<br />
* the plugin is able to work without channels (channels.conf 0 bytes)<br />
* a scan may take up to 30 minutes (or even longer) <br />
** DVB-T ~ 3 min <br />
** DVB-C ~ 25 min (symbolrate=AUTO, QAM=AUTO)<br />
** DVB-C ~ 4,5 min (symbolrate=6900, QAM=64)<br />
** DVB-C ~ 5 min (symbolrate=6900, QAM=256)<br />
** DVB-S ~ 30 min (Astra 19,2E)<br />
** pvrinput ~ 5min <br />
* if DVB-C symbolrate and modulation ('QAM') are known and defined in settings, the scan can be speed up<br />
* signal quality influences scan time and probability to find all channels<br />
* '''some DVB cards need explizit Inversion setting: try "AUTO/OFF" and "AUTO/ON"'''<br />
<br />
==[[SVDRP]] commands==<br />
* since version 0.0.3, ''commands with note 1) since 0.0.5-pre12''<br />
<br />
{| class="wikitable"<br />
|- bgcolor=#efefef<br />
!Parameter<br />
!Description<br />
|-<br />
| '''S_TERR''' || '''Start DVB-T scan.'''<pre>svdrpsend.pl plug wirbelscan s_terr</pre><br />
|-<br />
| '''S_CABL''' || '''Start DVB-C scan.'''<pre>svdrpsend.pl plug wirbelscan s_cabl</pre><br />
|-<br />
| '''S_SAT''' || '''Start DVB-S scan.'''<pre>svdrpsend.pl plug wirbelscan s_sat</pre><br />
|-<br />
| '''S_PVR''' || '''Start PVRx50 scan.'''<pre>svdrpsend.pl plug wirbelscan s_pvr</pre><br />
|-<br />
| '''S_START''' || '''Start scan''' 1)<pre>svdrpsend.pl plug wirbelscan s_start</pre><br />
|-<br />
| '''S_STOP''' || '''Stop scan'''<pre>svdrpsend.pl plug wirbelscan s_stop</pre><br />
|-<br />
| '''SETUP''' ''<verb:log:type:inv_t:inv_c:srate:qam:cidx:sidx:s2:atsc:flags>'' <br />
||'''change plugin setup''' 1)<br />
''verb'' - verbosity (0..5)<br><br />
''log'' - logfile (0=OFF, 1=stdout, 2=syslog)<br><br />
''type'' - scan type (0=DVB-T, 1=DVB-C, 2=DVB-S/S2, 3=pvrinput, 4=pvrinput FM, 5=ATSC)<br><br />
''inv_t'' - DVB-T inversion (0=AUTO/OFF, 1=AUTO/ON)<br><br />
''inv_c'' - DVB-C inversion (0=AUTO/OFF, 1=AUTO/ON)<br><br />
''srate'' - DVB-C Symbolrate (0..15)<br><br />
''qam'' - DVB-C modulation (0=AUTO, 1=QAM64, 2=QAM128, 3=QAM256, 4=ALL)<br><br />
''cidx'' - country list index (Germany = 80)<br><br />
''sidx'' - satellite list index (S19.2E = 6, S23.5E = 8)<br><br />
''s2'' - enable DVB-S2 (0=OFF, 1=ON)<br><br />
''atsc'' - ATSC scan type (0=VSB, 1=QAM, 2=VSB+QAM)<br><br />
''flags'' - bitwise flag of TV=1, RADIO=2, FTA=4, SCRAMBLED=8, HDTV=16<br />
<pre>svdrpsend.pl plug wirbelscan setup 3:1:1:0:0:0:0:80:6:1:0:31</pre><br />
|-<br />
| '''STORE''' || '''Store Setup''' 1) <pre>svdrpsend.pl plug wirbelscan store</pre><br />
|-<br />
| '''LSTC''' || '''List Country IDs''' 1) <pre>svdrpsend.pl plug wirbelscan lstc</pre><br />
|-<br />
| '''LSTS''' || '''List Satellite IDs''' 1) <pre>svdrpsend.pl plug wirbelscan lsts</pre><br />
|-<br />
| '''QUERY''' || '''Query plugin version, setup values, plugin service API''' 1) <pre>svdrpsend.pl plug wirbelscan query</pre><br />
|}<br />
<br />
use ssh/putty or vdradmin, i.e. "plug wirbelscan s_pvr"<br />
<br />
===Parameters===<br />
{| class="wikitable"<br />
|-<br />
!Parameter (short)<br />
!Parameter (long)<br />
!Description<br />
|-<br />
| -p || --use-pvrinput || activate pvrinput support (''default: off''). since 0.0.7<br />
|}<br />
<br />
==Service Interface==<br />
* since 0.0.5-pre12 supports wirbelscan a service interface, so that external plugins remotely control each feature of wirbelscan. For details see [http://wirbel.htpc-forum.de/wirbelscan/SERVICES.html SERVICES.html]. So far tzhe following is supported:<br />
** Ask Plugin Version and Service API<br />
***''NOTE:''Service API Version of wirbelscan and external Plugin have to fit.<br />
** Commands<br />
***Start Scan<br />
***Stop Scan<br />
***store setup<br />
** Actual status information<br />
***Scanning/Stopped/Busy<br />
***Name of DVB device used<br />
***Progress in % of predefined transponders<br />
***Signal strength as reported by dvb device<br />
***Actual transponder<br />
***sum count channels<br />
***count new channels<br />
**Set and query all setup parameters<br />
**query known country IDs and Names<br />
***ID (ATSC/DVB-C/DVB-T)<br />
***short name<br />
***full Name<br />
**query known satellites, IDs and Names<br />
***ID (DVB-S/S2)<br />
***short name<br />
***full name<br />
<br />
a sample plugin is [http://wirbel.htpc-forum.de/wirbelscan/vdr-servdemo-0.0.1.tgz here]. To use the service API an ''#include "../wirbelscan/wirbelscan_services.h"'' should be done.<br />
<br />
==Software Requirements==<br />
* pluginparams-patch if vdr < 1.7.13 (see IPTV-Plugin)<br />
* up-to-date v4l2 Header<br />
** /usr/include/linux/videodev2.h<br />
* DVB Header version 5.x:<br />
** /usr/include/linux/dvb/frontend.h<br />
** /usr/include/linux/dvb/version.h<br />
* VDR versions<br />
** vdr-1.6.0-1<br />
** vdr-1.7.0-extp72-v3-easyvdr-8.0 (Make.config: DEFINES += -DEASYVDR80)<br />
** vdr-1.7.2 .. 1.7.16 '''HINWEIS: DVB-S2 support ab vdr-1.7.3'''<br />
* pvrinput plugin (recommended: use latest git)<br />
<br />
==Installation==<br />
* see general [[Plugin Installation]]<br />
<!-- ===Options=== * none--><br />
<!-- ===Patches=== * none. --><br />
<!-- ==Configuration== * as usual. --><br />
<!-- ===Settings=== * Plugin Setup Dialog. --><br />
<!-- ===Parameters=== * none --><br />
<!-- ==Sonstiges== --><br />
<!-- ===Problems=== --><br />
<br />
==Add-Ons==<br />
* opt: Main Menue Entry via [[wirbelscancontrol-plugin]]<br />
<!-- ===Wunschliste=== --><br />
<!-- ===Snapshot=== --><br />
<br />
==Latest Version==<br />
[http://wirbel.htpc-forum.de/wirbelscan/vdr-wirbelscan-0.0.7.tgz Version 0.0.7]<br />
<br />
==Links==<br />
# [http://wirbel.htpc-forum.de/wirbelscan/index2.html Homepage]<br />
<br />
[[category:Plugins]]<br />
{{i18n|wirbelscan-plugin}}</div>Wirbelhttps://www.linuxtv.org/vdrwiki/index.php?title=Plugins&diff=6580Plugins2015-01-15T13:00:38Z<p>Wirbel: /* W */</p>
<hr />
<div>==Description==<br />
A Plugin is a program extension of [[VDR]], which can be reloaded as a library at runtime of the program.<br />
<br />
A plugin only needs to be recompiled if the plugin interface API version has changed in VDR. Some plugins are dependent on additional VDR patches in order to achieve the desired function.<br />
<br />
==Installation==<br />
* see [[Plugin Installation]]<br />
* Special features are described on the corresponding plugin page.<br />
<br />
==Liste==<br />
{{Box Info|<br />
Plugins last updated before VDR-1.7.0, can to be found in the [[List of outdated Plugins]].<br><br />
Most likely that list here is not up-to-date, you may want to search on the [http://www.vdr-wiki.de German wiki] for newer informations.}}<br />
<br />
{{TOC}}<br />
{| width=100% class="wikitable"<br />
{{Plugins_end}}<br />
<br />
===A===<br />
{{Plugins_begin}}<br />
{{Plugins_item|ac3mode|Indicates the number of audio channels (eg 5.1)|x||}}<br />
{{Plugins_item|actuator|Control of a satellite dish rotor via parallel port|x||}}<br />
{{Plugins_item|admin|Starting / stopping services, editing configuration files|x||}}<br />
{{Plugins_item|alcd|Text output on [[Activy]] LC displays|x||}}<br />
{{Plugins_item|arghdirector|Usage of Sky MultiFeed channels, Fork of [[Director-plugin]]|x||}}<br />
{{Plugins_item|atscepg|shows ATSC (North America) EPG|x||}}<br />
{{Plugins_item|autostart|Start tasks when you insert removable media|x||}}<br />
{{Plugins_item|audiorecorder|Automatically records radio channels with matching title|x||}}<br />
{{Plugins_end}}<br />
<br />
===B===<br />
{{Plugins_begin}}<br />
{{Plugins_item|beep|Audible messages via internal PC speaker|x||}}<br />
{{Plugins_item|bgprocess|Progress indicator for external programs, controlled by [[SVDRP]]|x|x|}}<br />
{{Plugins_item|block|EPG background scan for unwanted TV events|x||}}<br />
{{Plugins_item|bluray|A simple BluRay player.|||}}<br />
{{Plugins_item|burn|Burn movies to [[DVD]]|x||}}<br />
{{Plugins_end}}<br />
<br />
===C===<br />
{{Plugins_begin}}<br />
{{Plugins_item|cdplayer|Play Audio CDs|x|x|}}<br />
{{Plugins_item|chanman|Select/Change channel list via [[OSD]]|x|x|}}<br />
{{Plugins_item|channelblocker|Administrate blocked channels for channel block patch|||}}<br />
{{Plugins_item|channellists|Switch channel lists via OSD|||}}<br />
{{Plugins_item|cinebars|Creates virtual cine bars|x|x|x}}<br />
{{Plugins_item|control|[[OSD]] output on Telnet terminal|x||}}<br />
{{Plugins_item|cpumon|Displays CPU usage|x||}}<br />
{{Plugins_end}}<br />
<br />
===D===<br />
{{Plugins_begin}}<br />
{{Plugins_item|dbus2vdr|Control VDR via D-Bus|x|x|}}<br />
{{Plugins_item|Deluxe|Store DeluxeMusic TV shows|x||}}<br />
{{Plugins_item|devstatus|Display DVB device status (incl. running records)|x|x|x}}<br />
{{Plugins_item|dummydevice|Dummy output device|x||}}<br />
{{Plugins_item|dvbhddevice|Output Device plugin for TT S2-6400 DVB card|x|x|x}}<br />
{{Plugins_item|dvd|A DVD player|x|x|x}}<br />
{{Plugins_item|dvdswitch|Plays DVD Images|x||}}<br />
{{Plugins_item|dynamite|"Plug'n'play" of DVB receivers|x||}}<br />
{{Plugins_end}}<br />
<br />
===E===<br />
{{Plugins_begin}}<br />
{{Plugins_item|eepg|Extended EPG import|x|x|}}<br />
{{Plugins_item|epgfixer|Processing of EPG content with RegExp|x|x|}}<br />
{{Plugins_item|epgsearch|Advanced EPG search and automatic creation of timers|x|x|}}<br />
{{Plugins_item|epgsync|imported EPG of an other VDR via SVDRP|x|x|}}<br />
{{Plugins_item|exec|integrated timer for actions / shell commands in VDR|x||}}<br />
{{Plugins_item|externalplayer|use external programs as player|x|x|}}<br />
{{Plugins_item|extrecmenu|advanced recording menu|x|x|}}<br />
{{Plugins_end}}<br />
<br />
===F===<br />
{{Plugins_begin}}<br />
{{Plugins_item|favorites|List of favorite channels|x||}}<br />
{{Plugins_item|femon|Display of signal information of a DVB card|x|x|x}}<br />
{{Plugins_item|fepg|Tabular EPG index|x||}}<br />
{{Plugins_item|ffnetdev|An output plugin via network|x||}}<br />
{{Plugins_item|filebrowser|File Manager|x|x|}}<br />
{{Plugins_item|fritzbox|ISDN telephone call manager|x|x|}}<br />
{{Plugins_end}}<br />
<br />
===G===<br />
{{Plugins_begin}}<br />
{{Plugins_item|gbc|GameBoy - Emulator|x||}}<br />
{{Plugins_item|graphlcd|Output information on graphical LCDs|x|x|}}<br />
{{Plugins_item|graphtft|Output information on TFTs|x||}}<br />
{{Plugins_end}}<br />
<br />
===B===<br />
{{Plugins_begin}}<br />
{{Plugins_item|hattrick|A match viewer for the online browser game Hattrick|||}}<br />
{{Plugins_item|hello|A simple 'hello' sample plugin|x||}}<br />
{{Plugins_item|history|Maintains a history of played recordings and files.|||}}<br />
{{Plugins_end}}<br />
<br />
===I===<br />
{{Plugins_begin}}<br />
{{Plugins_item|inputdev|Reads input events from /dev/input/eventX (KBD, IR, mouse)|||}}<br />
{{Plugins_item|imonlcd|Output information on imonLCD.|x|x|}}<br />
{{Plugins_item|infosatepg|Loading EPG data via satellite|||}}<br />
{{Plugins_item|iptv|Use IPTV in VDR|x||}}<br />
{{Plugins_end}}<br />
<br />
===J===<br />
{{Plugins_begin}}<br />
{{Plugins_end}}<br />
<br />
===K===<br />
{{Plugins_begin}}<br />
{{Plugins_item|karaoke|Karaoke|||}}<br />
{{Plugins_item|kvdrmon|one KDE auxiliary plug-in for kvdrmon|||}}<br />
{{Plugins_end}}<br />
<br />
===L===<br />
{{Plugins_begin}}<br />
{{Plugins_item|lastfm|Playing Last.fm music|||}}<br />
{{Plugins_item|lcdproc|Output information on LCDs|||}}<br />
{{Plugins_item|lcr|a telephone least cost Manager|||}}<br />
{{Plugins_item|lightpack|Access to Lightpack/Prismatic software from VDR|x|x|}}<br />
{{Plugins_item|lircrc|Native LIRC support|||}}<br />
{{Plugins_item|live|Live Interactive VDR Environment|x|x|}}<br />
{{Plugins_item|loadepg|Import of Canal+ EPG data|||}}<br />
{{Plugins_end}}<br />
<br />
===M===<br />
{{Plugins_begin}}<br />
{{Plugins_item|mailbox|Simple email client|x||}}<br />
{{Plugins_item|markad|advertising scanner, sets cutting marks using [[Markad]]|x|x|}}<br />
{{Plugins_item|menuorg|Organize the OSD menu with submenus|x||}}<br />
{{Plugins_item|mldkgui|MLDonkey plugin|||}}<br />
{{Plugins_item|mlist|History of all OSD messages|||}}<br />
{{Plugins_item|mouse mate|Control with Mouse|x||}}<br />
{{Plugins_item|mp3|MP3 player|||}}<br />
{{Plugins_item|muggle|mp3 database|||}}<br />
{{Plugins_end}}<br />
<br />
===N===<br />
{{Plugins_begin}}<br />
{{Plugins_item|neutrinoepg|Displays the EPG information in the classic Neutrino look|x|x|}}<br />
{{Plugins_item|noepg|EPG for some channels block / allow|x||}}<br />
{{Plugins_end}}<br />
<br />
===O===<br />
{{Plugins_begin}}<br />
{{Plugins_item|osdadjust|OSD adjust size and position on the screen|||}}<br />
{{Plugins_item|osddemo|Demo plug-in for use of the VDR OSD|x||}}<br />
{{Plugins_item|osdpip|a TV image of another transmitter Show.|x||}}<br />
{{Plugins_item|osdserver|OSD access via TCP / IP for other programs|x||}}<br />
{{Plugins_item|osdteletext|Teletext via OSD|x|x|}}<br />
{{Plugins_item|otv4vdr|TPS EPG Import|||}}<br />
{{Plugins_end}}<br />
<br />
===P===<br />
{{Plugins_begin}}<br />
{{Plugins_item|peer|Edit timers on VDRs, and access to the OSD|x|x|}}<br />
{{Plugins_item|permashift|Plugin for permanent timeshift|x|x|}}<br />
{{Plugins_item|pin|Parental control for VDR|||}}<br />
{{Plugins_item|play|Mplayer plugin for VDR and X11|||}}<br />
{{Plugins_item|playlist|Using playlists for video recording|||}}<br />
{{Plugins_item|premiereepg|premiereepg2vdr as a plugin|x||}}<br />
{{Plugins_item|pvr350|TV image on a Hauppauge PVR 350|x||}}<br />
{{Plugins_item|pvrinput|Use analog TV card|x||}}<br />
{{Plugins_end}}<br />
<br />
===Q===<br />
{{Plugins_begin}}<br />
{{Plugins_end}}<br />
<br />
===R===<br />
{{Plugins_begin}}<br />
{{Plugins_item|radio|Background image for radio stations, as well as RDS text|x|x|}}<br />
{{Plugins_item|remote|Support of remote controls ("/dev/input/x")|x|x|x}}<br />
{{Plugins_item|remoteosd|Access to the main menu of another VDR|x|x|}}<br />
{{Plugins_item|remotetimers|Timer management in Client-/Server-Struktur|x|x|}}<br />
{{Plugins_item|restfulapi|Provides a RESTful API to access VDR data ready|x|x|}}<br />
{{Plugins_item|ripit|Ripping of audio CDs|x||}}<br />
{{Plugins_item|rotor|Controls satellite dish rotor|||}}<br />
{{Plugins_item|rotorng|Controls satellite dish rotor|||}}<br />
{{Plugins_item|rssreader|show RSS news feeds|x||}}<br />
{{Plugins_end}}<br />
<br />
===S===<br />
{{Plugins_begin}}<br />
{{Plugins_item|sc|Software Conditional Access Module|x|x|}}<br />
{{Plugins_item|scheduler|control external tasks with VDR|||}}<br />
{{Plugins_item|screenshot|Makes Screenshots|||}}<br />
{{Plugins_item|scripting|VDR connect with Ruby|||}}<br />
{{Plugins_item|seduatmo|AtmoLight for SEDU based controller|||}}<br />
{{Plugins_item|setup|Edit system settings and VDR-menus|||}}<br />
{{Plugins_item|sked|SoftCam.Key EDitor|||}}<br />
{{Plugins_item|skincurses|Skin for the console|x||}}<br />
{{Plugins_item|skinelchi|Elchi patch as a plugin|x|x|}}<br />
{{Plugins_item|skinflat|a simple and slim skin for VDR||x|}}<br />
{{Plugins_item|skinenigmang|D-Box Enigma skin|x|x|}}<br />
{{Plugins_item|skinnOpacity|True Color skin for HD VDRs||x|}}<br />
{{Plugins_item|skinpearlhd|PearlHD the skin as a native plugin|||}}<br />
{{Plugins_item|skinsoppalusikka|Elchi-skin as a plugin|x||}}<br />
{{Plugins_item|SkySelectFeeds|Multifeed option of "Sky Select"|x||}}<br />
{{Plugins_item|sleeptimer|countdown counter for tasks/shutdown|x|x|}}<br />
{{Plugins_item|smarttvweb|Recordings and live TV on SmartTVs/-phones|x||}}<br />
{{Plugins_item|sndctl|Sound Mixer control|x||}}<br />
{{Plugins_item|softhddevice|HDTV output plugin for VDR with GPU support.|x|x|}}<br />
{{Plugins_item|Solarstorm|multi-channel TV backlight|x||}}<br />
{{Plugins_item|span|provides audio FFT data available|||}}<br />
{{Plugins_item|spider|the spider game|||}}<br />
{{Plugins_item|sportng|Soccer game results|||}}<br />
{{Plugins_item|streamdev|Streaming-Server/Client|x|x|}}<br />
{{Plugins_item|streamplayer|Plays video streams|||}}<br />
{{Plugins_item|sudoku|Generate and solve Number Place puzzles|||}}<br />
{{Plugins_item|suspendoutput|black background|||}}<br />
{{Plugins_item|svdrposd|OSD menu via SVDRP||x|}}<br />
{{Plugins_item|svdrpservice|Interface for access to SVDRP server||x|}}<br />
{{Plugins_item|systeminfo|System information via OSD|x|x|}}<br />
{{Plugins_end}}<br />
<br />
===T===<br />
{{Plugins_begin}}<br />
{{Plugins_item|targavfd|Control Futaba Dot-Matrix Display|x|x|}}<br />
{{Plugins_item|text2skin|An interpreter for xml-based skins|x|x|}}<br />
{{Plugins_item|timeline|Displays collisions programmed timer|||}}<br />
{{Plugins_item|TVGuide|a 2D EPG Viewer manner of a TV magazine|x|x|}}<br />
{{Plugins_item|tvtv|TvTv in OSD|||}}<br />
{{Plugins_end}}<br />
<br />
===U===<br />
{{Plugins_begin}}<br />
{{Plugins_item|uactivity|Starts shell scripts for changes in user activity|x||}}<br />
{{Plugins_item|undelete|Recovery of deleted recordings||x|}}<br />
{{Plugins_item|upnp|via UPnP AV access to VDR|x|x|}}<br />
{{Plugins_end}}<br />
<br />
===V===<br />
{{Plugins_begin}}<br />
{{Plugins_item|vdrmanager|VDR control via Android|x||}}<br />
{{Plugins_item|vdrrip|Movie Encoder|x||}}<br />
{{Plugins_item|vdrtva|TV-Anytime ( Accurate Recording and Series Link )|x|x|}}<br />
{{Plugins_item|vodcatcher|Video_on_Demand|||}}<br />
{{Plugins_item|vompserver|VDR as Hauppauge MediaMVP server||x|}}<br />
{{Plugins_item|vnsi-server|VDR-Network-Streaming-Interface|x|x|}}<br />
{{Plugins_end}}<br />
<br />
===W===<br />
{{Plugins_begin}}<br />
{{Plugins_item|webvideo|Loading videos from the internet|x||}}<br />
{{Plugins_item|wirbelscan|a Channel Scanner for digital and analogue TV|x|x|x}}<br />
{{Plugins_item|wirbelscancontrol|a main menu for [[wirbelscan-plugin]]|x||}}<br />
{{Plugins_end}}<br />
<br />
===X===<br />
{{Plugins_begin}}<br />
{{Plugins_item|xineliboutput|a libxine based VDR output device|x|x|}}<br />
{{Plugins_item|xmame|Start Xmame games within the VDR|x||}}<br />
{{Plugins_item|xmltv2vdr|Import EPG data into VDR|x|x|}}<br />
{{Plugins_end}}<br />
<br />
===Y===<br />
{{Plugins_begin}}<br />
{{Plugins_item|yaepg|Electronic Program Guide|||}}<br />
{{Plugins_item|yaepghd|Electronic Program Guide|x|x|}}<br />
{{Plugins_item|yacoto|Converts recordings to other formats|||}}<br />
{{Plugins_end}}<br />
<br />
===Z===<br />
{{Plugins_begin}}<br />
{{Plugins_item|zaphistory|List of recently-watched programs with statistics|x|x|}}<br />
{{Plugins_item|zappilot|Show EPG without channel switching|||}}<br />
<br />
<!-- END OF TABLE. DO NOT TOUCH. --><br />
|}<br />
<br />
==See also==<br />
# [[List of outdated Plugins]]<br />
# [[Plugins_by_topic]]<br />
# [[Hints for plugin developers]]<br />
<br />
==Links==<br />
# {{mirror 1|}}<br />
<br />
<br />
[[Category:Plugins]]<br />
{{i18n|Plugins}}<br />
<br />
__NOTOC__</div>Wirbelhttps://www.linuxtv.org/vdrwiki/index.php?title=Channels.conf_analogue&diff=6579Channels.conf analogue2014-11-22T13:32:25Z<p>Wirbel: </p>
<hr />
<div>==Description==<br />
Some samples for the channels.conf with analogue TV.<br><br />
NOTE: for analogue TV within VDR, the only supported plugin is the<br />
*[[pvrinput-plugin]]<br />
<br />
<br />
<br />
<br />
==more examples==<br />
===4000 Basel CH (pvrinput)===<br />
NOTE: this example uses an outdated channel syntax.<br />
<pre><br />
:pvrinput<br />
SF1:679250:C0:C:0:301:300:305:A1:12003:0:0:0<br />
SF2:238710:C0:C:0:301:300:305:A1:12003:0:0:0<br />
SFINFO:807250:C0:C:0:301:300:305:A1:12003:0:0:0<br />
ARD:189330:C0:C:0:301:300:305:A1:12003:0:0:0<br />
ZDF:196380:C0:C:0:301:300:305:A1:12003:0:0:0<br />
ORF1:823250:C0:C:0:301:300:305:A1:12003:0:0:0<br />
ORF2:839250:C0:C:0:301:300:305:A1:12003:0:0:0<br />
BR:182250:C0:C:0:301:300:305:A1:12003:0:0:0<br />
SW:203440:C0:C:0:301:300:305:A1:12003:0:0:0<br />
NDR:487250:C0:C:0:301:300:305:A1:12003:0:0:0<br />
MDR:132890:C0:C:0:301:300:305:A1:12003:0:0:0<br />
nw1:783250:C0:C:0:301:300:305:A1:12003:0:0:0<br />
Arte:615250:C0:C:0:301:300:305:A1:12003:0:0:0<br />
3Sat:175220:C0:C:0:301:300:305:A1:12003:0:0:0<br />
TeleBasel:266930:C0:C:0:301:300:305:A1:12003:0:0:0<br />
TSR1:210490:C0:C:0:301:300:305:A1:12003:0:0:0<br />
TSR2:687250:C0:C:0:301:300:305:A1:12003:0:0:0<br />
TSI1:847250:C0:C:0:301:300:305:A1:12003:0:0:0<br />
TSI2:791250:C0:C:0:301:300:305:A1:12003:0:0:0<br />
Pro7:118780:C0:C:0:301:300:305:A1:12003:0:0:0<br />
RTL:639250:C0:C:0:301:300:305:A1:12003:0:0:0<br />
Sat 1:631250:C0:C:0:301:300:305:A1:12003:0:0:0<br />
RTL 2:623250:C0:C:0:301:300:305:A1:12003:0:0:0<br />
Vox:655250:C0:C:0:301:300:305:A1:12003:0:0:0<br />
Kabel1:775250:C0:C:0:301:300:305:A1:12003:0:0:0<br />
StarTV:735250:C0:C:0:301:300:305:A1:12003:0:0:0<br />
Cartoon:767250:C0:C:0:301:300:305:A1:12003:0:0:0<br />
Eurosport:125840:C0:C:0:301:300:305:A1:12003:0:0:0<br />
DSF:479250:C0:C:0:301:300:305:A1:12003:0:0:0<br />
MTV:139950:C0:C:0:301:300:305:A1:12003:0:0:0<br />
VIVA:543250:C0:C:0:301:300:305:A1:12003:0:0:0<br />
BBC Prime:511250:C0:C:0:301:300:305:A1:12003:0:0:0<br />
BBC World:759250:C0:C:0:301:300:305:A1:12003:0:0:0<br />
CNN:161110:C0:C:0:301:300:305:A1:12003:0:0:0<br />
NBCE:815250:C0:C:0:301:300:305:A1:12003:0:0:0<br />
CNBCE:455250:C0:C:0:301:300:305:A1:12003:0:0:0<br />
F 1:245770:C0:C:0:301:300:305:A1:12003:0:0:0<br />
F 2:252820:C0:C:0:301:300:305:A1:12003:0:0:0<br />
F 3:259880:C0:C:0:301:300:305:A1:12003:0:0:0<br />
I 1:231660:C0:C:0:301:300:305:A1:12003:0:0:0<br />
</pre><br />
<br />
===D-24943 Flensburg (pvrinput)===<br />
NOTE: this example uses an outdated channel syntax<br />
<pre><br />
:pvrinput analogue cable Flensburg<br />
Danmarks Radio 1:48250:C0:C:0:301:300:305:A1:40000:0:0:0<br />
TV 2:55250:C0:C:0:301:300:305:A1:40001:0:0:0<br />
NBC Das Vierte:62250:C0:C:0:301:300:305:A1:8008:0:0:0<br />
NDR:175250:C0:C:0:301:300:305:A1:28224:0:0:0<br />
ARD:182250:C0:C:0:301:300:305:A1:28106:0:0:0<br />
DSF:189250:C0:C:0:301:300:305:A1:900:0:0:0<br />
ZDF:196250:C0:C:0:301:300:305:A1:28006:0:0:0<br />
KABEL 1:203250:C0:C:0:301:300:305:A1:899:0:0:0<br />
VOX:210250:C0:C:0:301:300:305:A1:12060:0:0:0<br />
ProSieben:217250:C0:C:0:301:300:305:A1:898:0:0:0<br />
RTL 2:224250:C0:C:0:301:300:305:A1:12020:0:0:0<br />
CNN:126250:C0:C:0:301:300:305:A1:28512:0:0:0<br />
BBC World:140250:C0:C:0:301:300:305:A1:8204:0:0:0<br />
arte:140250:C0:C:0:301:300:305:A1:28109:0:0:0<br />
MTV:147250:C0:C:0:301:300:305:A1:28653:0:0:0<br />
OK Flensburg:154250:C0:C:0:301:300:305:A1:40021:0:0:0<br />
SAT.1:161250:C0:C:0:301:300:305:A1:46:0:0:0<br />
RTL:168250:C0:C:0:301:300:305:A1:12003:0:0:0<br />
3sat:231250:C0:C:0:301:300:305:A1:28007:0:0:0<br />
VIVA:238250:C0:C:0:301:300:305:A1:12732:0:0:0<br />
n-tv:245250:C0:C:0:301:300:305:A1:12730:0:0:0<br />
N24:252250:C0:C:0:301:300:305:A1:47:0:0:0<br />
mdr:259250:C0:C:0:301:300:305:A1:28204:0:0:0<br />
Kinderkanal:266250:C0:C:0:301:300:305:A1:28008:0:0:0<br />
TV 5:266250:C0:C:0:301:300:305:A1:12240:0:0:0<br />
Bayerisches Fernsehen:273250:C0:C:0:301:300:305:A1:28107:0:0:0<br />
WDR:280250:C0:C:0:301:300:305:A1:28111:0:0:0<br />
Phoenix:287250:C0:C:0:301:300:305:A1:28114:0:0:0<br />
euronews:294250:C0:C:0:301:300:305:A1:28015:0:0:0<br />
NEUN LIVE:303250:C0:C:0:301:300:305:A1:897:0:0:0<br />
Terra Nova:311250:C0:C:0:301:300:305:A1:17033:0:0:0<br />
XXP:311250:C0:C:0:301:300:305:A1:17007:0:0:0<br />
Super RTL:319250:C0:C:0:301:300:305:A1:12040:0:0:0<br />
Bloomberg TV:327250:C0:C:0:301:300:305:A1:12160:0:0:0<br />
EUROSPORT:327250:C0:C:0:301:300:305:A1:28009:0:0:0<br />
Home Shopping Europe:335250:C0:C:0:301:300:305:A1:40:0:0:0<br />
TV TRAVEL SHOP:335250:C0:C:0:301:300:305:A1:13623:0:0:0<br />
QVC:415250:C0:C:0:301:300:305:A1:12100:0:0:0<br />
:AV-Eingaenge<br />
Composite (Chinch):1:C56:C:0:301:300:305:A1:65004:0:0:0<br />
Composite (Adapter):2:C0:C:0:301:300:305:A1:65005:0:0:0<br />
S-Video:3:C89:C:0:301:300:305:A1:65003:0:0:0<br />
</pre><br />
<br />
[[Kategorie:AnalogTV]]<br />
<br />
<!--Link to german page--><br />
[[de:Channels.conf_analog]]</div>Wirbelhttps://www.linuxtv.org/vdrwiki/index.php?title=Channels.conf_analogue&diff=6578Channels.conf analogue2014-11-22T13:30:23Z<p>Wirbel: </p>
<hr />
<div>==Description==<br />
Some samples for the channels.conf with analogue TV.<br><br />
NOTE: for analogue TV within VDR, the only supported plugin is the<br />
*[[pvrinput-plugin]]<br />
<br />
If you use VDR-1.2.x, you can only use "old" analogtv, but anyway most users will use the newer vdr-1.3.x version.<br />
<br />
==generic analogTV==<br />
Use these IDs for analogTV plugin with ivtv >= 0.2, CAID "A0" is only for vdr-1.3.x.<br />
All frequencies in this example are pal-europe, you will have to modify this for your country.<br />
<pre><br />
:analogTV pal-europe germany<br />
k 02: 48250:C0D45B6:C:0:301:300:0:A0:0:0:0:0<br />
k 03: 55250:C0D45B6:C:0:301:300:0:A0:0:0:0:0<br />
k 04: 62250:C0D45B6:C:0:301:300:0:A0:0:0:0:0<br />
S 01: 69250:C0D45B6:C:0:301:300:0:A0:0:0:0:0<br />
S 02: 76250:C0D45B6:C:0:301:300:0:A0:0:0:0:0<br />
S 03: 83250:C0D45B6:C:0:301:300:0:A0:0:0:0:0<br />
SE01:105250:C0D45B6:C:0:301:300:0:A0:0:0:0:0<br />
SE02:112250:C0D45B6:C:0:301:300:0:A0:0:0:0:0<br />
SE03:119250:C0D45B6:C:0:301:300:0:A0:0:0:0:0<br />
SE04:126250:C0D45B6:C:0:301:300:0:A0:0:0:0:0<br />
SE05:133250:C0D45B6:C:0:301:300:0:A0:0:0:0:0<br />
SE06:140250:C0D45B6:C:0:301:300:0:A0:0:0:0:0<br />
SE07:147250:C0D45B6:C:0:301:300:0:A0:0:0:0:0<br />
SE08:154250:C0D45B6:C:0:301:300:0:A0:0:0:0:0<br />
SE09:161250:C0D45B6:C:0:301:300:0:A0:0:0:0:0<br />
SE10:168250:C0D45B6:C:0:301:300:0:A0:0:0:0:0<br />
k 05:175250:C0D45B6:C:0:301:300:0:A0:0:0:0:0<br />
k 06:182250:C0D45B6:C:0:301:300:0:A0:0:0:0:0<br />
k 07:189250:C0D45B6:C:0:301:300:0:A0:0:0:0:0<br />
k 08:196250:C0D45B6:C:0:301:300:0:A0:0:0:0:0<br />
k 09:203250:C0D45B6:C:0:301:300:0:A0:0:0:0:0<br />
k 10:210250:C0D45B6:C:0:301:300:0:A0:0:0:0:0<br />
k 11:217250:C0D45B6:C:0:301:300:0:A0:0:0:0:0<br />
k 12:224250:C0D45B6:C:0:301:300:0:A0:0:0:0:0<br />
SE11:231250:C0D45B6:C:0:301:300:0:A0:0:0:0:0<br />
SE12:238250:C0D45B6:C:0:301:300:0:A0:0:0:0:0<br />
SE13:245250:C0D45B6:C:0:301:300:0:A0:0:0:0:0<br />
SE14:252250:C0D45B6:C:0:301:300:0:A0:0:0:0:0<br />
SE15:259250:C0D45B6:C:0:301:300:0:A0:0:0:0:0<br />
SE16:266250:C0D45B6:C:0:301:300:0:A0:0:0:0:0<br />
SE17:273250:C0D45B6:C:0:301:300:0:A0:0:0:0:0<br />
SE18:280250:C0D45B6:C:0:301:300:0:A0:0:0:0:0<br />
SE19:287250:C0D45B6:C:0:301:300:0:A0:0:0:0:0<br />
SE20:294250:C0D45B6:C:0:301:300:0:A0:0:0:0:0<br />
S 21:303250:C0D45B6:C:0:301:300:0:A0:0:0:0:0<br />
S 22:311250:C0D45B6:C:0:301:300:0:A0:0:0:0:0<br />
S 23:319250:C0D45B6:C:0:301:300:0:A0:0:0:0:0<br />
S 24:327250:C0D45B6:C:0:301:300:0:A0:0:0:0:0<br />
S 25:335250:C0D45B6:C:0:301:300:0:A0:0:0:0:0<br />
S 26:343250:C0D45B6:C:0:301:300:0:A0:0:0:0:0<br />
S 27:351250:C0D45B6:C:0:301:300:0:A0:0:0:0:0<br />
S 28:359250:C0D45B6:C:0:301:300:0:A0:0:0:0:0<br />
S 29:367250:C0D45B6:C:0:301:300:0:A0:0:0:0:0<br />
S 30:375250:C0D45B6:C:0:301:300:0:A0:0:0:0:0<br />
S 31:383250:C0D45B6:C:0:301:300:0:A0:0:0:0:0<br />
S 32:391250:C0D45B6:C:0:301:300:0:A0:0:0:0:0<br />
S 33:399250:C0D45B6:C:0:301:300:0:A0:0:0:0:0<br />
S 34:407250:C0D45B6:C:0:301:300:0:A0:0:0:0:0<br />
S 35:415250:C0D45B6:C:0:301:300:0:A0:0:0:0:0<br />
S 36:423250:C0D45B6:C:0:301:300:0:A0:0:0:0:0<br />
S 37:431250:C0D45B6:C:0:301:300:0:A0:0:0:0:0<br />
S 38:439250:C0D45B6:C:0:301:300:0:A0:0:0:0:0<br />
S 39:447250:C0D45B6:C:0:301:300:0:A0:0:0:0:0<br />
S 40:455250:C0D45B6:C:0:301:300:0:A0:0:0:0:0<br />
S 41:463250:C0D45B6:C:0:301:300:0:A0:0:0:0:0<br />
k 21:471250:C0D45B6:C:0:301:300:0:A0:0:0:0:0<br />
k 22:479250:C0D45B6:C:0:301:300:0:A0:0:0:0:0<br />
k 23:487250:C0D45B6:C:0:301:300:0:A0:0:0:0:0<br />
k 24:493250:C0D45B6:C:0:301:300:0:A0:0:0:0:0<br />
k 25:503250:C0D45B6:C:0:301:300:0:A0:0:0:0:0<br />
k 26:511250:C0D45B6:C:0:301:300:0:A0:0:0:0:0<br />
k 27:519250:C0D45B6:C:0:301:300:0:A0:0:0:0:0<br />
k 28:527250:C0D45B6:C:0:301:300:0:A0:0:0:0:0<br />
k 29:535250:C0D45B6:C:0:301:300:0:A0:0:0:0:0<br />
k 30:543250:C0D45B6:C:0:301:300:0:A0:0:0:0:0<br />
k 31:551250:C0D45B6:C:0:301:300:0:A0:0:0:0:0<br />
k 32:559250:C0D45B6:C:0:301:300:0:A0:0:0:0:0<br />
k 33:567250:C0D45B6:C:0:301:300:0:A0:0:0:0:0<br />
k 34:575250:C0D45B6:C:0:301:300:0:A0:0:0:0:0<br />
k 35:583250:C0D45B6:C:0:301:300:0:A0:0:0:0:0<br />
k 36:591250:C0D45B6:C:0:301:300:0:A0:0:0:0:0<br />
k 37:599250:C0D45B6:C:0:301:300:0:A0:0:0:0:0<br />
k 38:607250:C0D45B6:C:0:301:300:0:A0:0:0:0:0<br />
k 39:615250:C0D45B6:C:0:301:300:0:A0:0:0:0:0<br />
k 40:623250:C0D45B6:C:0:301:300:0:A0:0:0:0:0<br />
k 41:631250:C0D45B6:C:0:301:300:0:A0:0:0:0:0<br />
k 42:639250:C0D45B6:C:0:301:300:0:A0:0:0:0:0<br />
k 43:647250:C0D45B6:C:0:301:300:0:A0:0:0:0:0<br />
k 44:655250:C0D45B6:C:0:301:300:0:A0:0:0:0:0<br />
k 45:663250:C0D45B6:C:0:301:300:0:A0:0:0:0:0<br />
k 46:671250:C0D45B6:C:0:301:300:0:A0:0:0:0:0<br />
k 47:679250:C0D45B6:C:0:301:300:0:A0:0:0:0:0<br />
k 48:687250:C0D45B6:C:0:301:300:0:A0:0:0:0:0<br />
k 49:695250:C0D45B6:C:0:301:300:0:A0:0:0:0:0<br />
k 50:703250:C0D45B6:C:0:301:300:0:A0:0:0:0:0<br />
k 51:711250:C0D45B6:C:0:301:300:0:A0:0:0:0:0<br />
k 52:719250:C0D45B6:C:0:301:300:0:A0:0:0:0:0<br />
k 53:727250:C0D45B6:C:0:301:300:0:A0:0:0:0:0<br />
k 54:735250:C0D45B6:C:0:301:300:0:A0:0:0:0:0<br />
k 55:743250:C0D45B6:C:0:301:300:0:A0:0:0:0:0<br />
k 56:751250:C0D45B6:C:0:301:300:0:A0:0:0:0:0<br />
k 57:759250:C0D45B6:C:0:301:300:0:A0:0:0:0:0<br />
k 58:767250:C0D45B6:C:0:301:300:0:A0:0:0:0:0<br />
k 59:775250:C0D45B6:C:0:301:300:0:A0:0:0:0:0<br />
k 60:783250:C0D45B6:C:0:301:300:0:A0:0:0:0:0<br />
k 61:791250:C0D45B6:C:0:301:300:0:A0:0:0:0:0<br />
k 62:799250:C0D45B6:C:0:301:300:0:A0:0:0:0:0<br />
k 63:807250:C0D45B6:C:0:301:300:0:A0:0:0:0:0<br />
k 64:815250:C0D45B6:C:0:301:300:0:A0:0:0:0:0<br />
k 65:823250:C0D45B6:C:0:301:300:0:A0:0:0:0:0<br />
k 66:831250:C0D45B6:C:0:301:300:0:A0:0:0:0:0<br />
k 67:839250:C0D45B6:C:0:301:300:0:A0:0:0:0:0<br />
k 68:847250:C0D45B6:C:0:301:300:0:A0:0:0:0:0<br />
k 69:855250:C0D45B6:C:0:301:300:0:A0:0:0:0:0<br />
</pre><br />
<br />
==more examples==<br />
===3007 Bern(Schweiz)/Cablecom (Stand 06/2005)===<br />
analogTV, VDR-1.2.6 ivtv-0.2.x/0.3.x <br />
<pre><br />
SF1:175600:D45B6C0:C:0:301:300:0:32001:901:0:0:0<br />
SF2:210910:D45B6C0:C:0:301:300:0:32001:907:0:0:0<br />
SF Info:583230:D45B6C0:C:0:301:300:0:32001:911:0:0:0<br />
U1:295660:D45B6C0:C:0:301:300:0:32001:65000:0:0:0<br />
StarTV:260350:D45B6C0:C:0:301:300:0:32001:65001:0:0:0<br />
Telebärn:140290:D45B6C0:C:0:301:300:0:32001:65002:0:0:0<br />
VIVA:327230:D45B6C0:C:0:301:300:0:32001:65003:0:0:0<br />
MTV:583230:D45B6C0:C:0:301:300:0:32001:65004:0:0:0<br />
DSF:319230:D45B6C0:C:0:301:300:0:32001:900:0:0:0<br />
Eurosport:267410:D45B6C0:C:0:301:300:0:32001:65010:0:0:0<br />
RTL:253290:D45B6C0:C:0:301:300:0:32001:12003:0:0:0<br />
SAT1:203850:D45B6C0:C:0:301:300:0:32001:46:0:0:0<br />
PRO7:232100:D45B6C0:C:0:301:300:0:32001:20001:0:0:0<br />
ORF1:239160:D45B6C0:C:0:301:300:0:32001:13001:0:0:0<br />
VOX:431230:D45B6C0:C:0:301:300:0:32001:12060:0:0:0<br />
RTL2:479230:D45B6C0:C:0:301:300:0:32001:12020:0:0:0<br />
Kabel1:559230:D45B6C0:C:0:301:300:0:23001:20003:0:0:0<br />
ARD:161480:D45B6C0:C:0:301:300:0:32001:28106:0:0:0<br />
ZDF:217980:D45B6C0:C:0:301:300:0:32001:28106:0:0:0<br />
arte:495230:D45B6C0:C:0:301:300:0:32001:28109:0:0:0<br />
3sat:154410:D45B6C0:C:0:301:300:0:32001:28007:0:0:0<br />
BR:599230:D45B6C0:C:0:301:300:0:32001:65005:0:0:0<br />
BW:567230:D45B6C0:C:0:301:300:0:32001:65006:0:0:0<br />
WDR:359230:D45B6C0:C:0:301:300:0:32001:65007:0:0:0<br />
ORF2:281540:D45B6C0:C:0:301:300:0:32001:13002:0:0:0<br />
SuperRTL:551230:D45B6C0:C:0:301:300:0:32001:12040:0:0:0<br />
n-tv:375230:D45B6C0:C:0:301:300:0:32001:65008:0:0:0<br />
EuroNews:168540:D45B6C0:C:0:301:300:0:32001:65009:0:0:0<br />
TVE:343230:D45B6C0:C:0:301:300:0:32001:65012:0:0:0<br />
TSR1:182660:D45B6C0:C:0:301:300:0:32001:65013:0:0:0<br />
TSR2:126160:D45B6C0:C:0:301:300:0:32001:65014:0:0:0<br />
TF1:274480:D45B6C0:C:0:301:300:0:32001:65015:0:0:0<br />
France2:133230:D45B6C0:C:0:301:300:0:32001:65016:0:0:0<br />
TV5:147350:D45B6C0:C:0:301:300:0:32001:65017:0:0:0<br />
M6:511230:D45B6C0:C:0:301:300:0:32001:65018:0:0:0<br />
TSI1:189730:D45B6C0:C:0:301:300:0:32001:65019:0:0:0<br />
TSI2:267410:D45B6C0:C:0:301:300:0:32001:65020:0:0:0<br />
RAI UNO:288600:D45B6C0:C:0:301:300:0:32001:65021:0:0:0<br />
Canale5:503230:D45B6C0:C:0:301:300:0:32001:65022:0:0:0<br />
CNN Int:225040:D45B6C0:C:0:301:300:0:32001:65023:0:0:0<br />
BBC Prime:591230:D45B6C0:C:0:301:300:0:32001:65024:0:0:0<br />
CNBC Europe:399230:D45B6C0:C:0:301:300:0:32001:65025:0:0:0<br />
HSE24:527230:D45B6C0:C:0:301:300:0:32001:65011:0:0:0<br />
Cablecom info:246230:D45B6C0:C:0:301:300:0:32001:65026:0:0:0<br />
</pre><br />
<br />
===4000 Basel CH (pvrinput)===<br />
<pre><br />
:pvrinput<br />
SF1:679250:C0:C:0:301:300:305:A1:12003:0:0:0<br />
SF2:238710:C0:C:0:301:300:305:A1:12003:0:0:0<br />
SFINFO:807250:C0:C:0:301:300:305:A1:12003:0:0:0<br />
ARD:189330:C0:C:0:301:300:305:A1:12003:0:0:0<br />
ZDF:196380:C0:C:0:301:300:305:A1:12003:0:0:0<br />
ORF1:823250:C0:C:0:301:300:305:A1:12003:0:0:0<br />
ORF2:839250:C0:C:0:301:300:305:A1:12003:0:0:0<br />
BR:182250:C0:C:0:301:300:305:A1:12003:0:0:0<br />
SW:203440:C0:C:0:301:300:305:A1:12003:0:0:0<br />
NDR:487250:C0:C:0:301:300:305:A1:12003:0:0:0<br />
MDR:132890:C0:C:0:301:300:305:A1:12003:0:0:0<br />
nw1:783250:C0:C:0:301:300:305:A1:12003:0:0:0<br />
Arte:615250:C0:C:0:301:300:305:A1:12003:0:0:0<br />
3Sat:175220:C0:C:0:301:300:305:A1:12003:0:0:0<br />
TeleBasel:266930:C0:C:0:301:300:305:A1:12003:0:0:0<br />
TSR1:210490:C0:C:0:301:300:305:A1:12003:0:0:0<br />
TSR2:687250:C0:C:0:301:300:305:A1:12003:0:0:0<br />
TSI1:847250:C0:C:0:301:300:305:A1:12003:0:0:0<br />
TSI2:791250:C0:C:0:301:300:305:A1:12003:0:0:0<br />
Pro7:118780:C0:C:0:301:300:305:A1:12003:0:0:0<br />
RTL:639250:C0:C:0:301:300:305:A1:12003:0:0:0<br />
Sat 1:631250:C0:C:0:301:300:305:A1:12003:0:0:0<br />
RTL 2:623250:C0:C:0:301:300:305:A1:12003:0:0:0<br />
Vox:655250:C0:C:0:301:300:305:A1:12003:0:0:0<br />
Kabel1:775250:C0:C:0:301:300:305:A1:12003:0:0:0<br />
StarTV:735250:C0:C:0:301:300:305:A1:12003:0:0:0<br />
Cartoon:767250:C0:C:0:301:300:305:A1:12003:0:0:0<br />
Eurosport:125840:C0:C:0:301:300:305:A1:12003:0:0:0<br />
DSF:479250:C0:C:0:301:300:305:A1:12003:0:0:0<br />
MTV:139950:C0:C:0:301:300:305:A1:12003:0:0:0<br />
VIVA:543250:C0:C:0:301:300:305:A1:12003:0:0:0<br />
BBC Prime:511250:C0:C:0:301:300:305:A1:12003:0:0:0<br />
BBC World:759250:C0:C:0:301:300:305:A1:12003:0:0:0<br />
CNN:161110:C0:C:0:301:300:305:A1:12003:0:0:0<br />
NBCE:815250:C0:C:0:301:300:305:A1:12003:0:0:0<br />
CNBCE:455250:C0:C:0:301:300:305:A1:12003:0:0:0<br />
F 1:245770:C0:C:0:301:300:305:A1:12003:0:0:0<br />
F 2:252820:C0:C:0:301:300:305:A1:12003:0:0:0<br />
F 3:259880:C0:C:0:301:300:305:A1:12003:0:0:0<br />
I 1:231660:C0:C:0:301:300:305:A1:12003:0:0:0<br />
</pre><br />
<br />
===D-24943 Flensburg (pvrinput)===<br />
<pre><br />
:pvrinput analogue cable Flensburg<br />
Danmarks Radio 1:48250:C0:C:0:301:300:305:A1:40000:0:0:0<br />
TV 2:55250:C0:C:0:301:300:305:A1:40001:0:0:0<br />
NBC Das Vierte:62250:C0:C:0:301:300:305:A1:8008:0:0:0<br />
NDR:175250:C0:C:0:301:300:305:A1:28224:0:0:0<br />
ARD:182250:C0:C:0:301:300:305:A1:28106:0:0:0<br />
DSF:189250:C0:C:0:301:300:305:A1:900:0:0:0<br />
ZDF:196250:C0:C:0:301:300:305:A1:28006:0:0:0<br />
KABEL 1:203250:C0:C:0:301:300:305:A1:899:0:0:0<br />
VOX:210250:C0:C:0:301:300:305:A1:12060:0:0:0<br />
ProSieben:217250:C0:C:0:301:300:305:A1:898:0:0:0<br />
RTL 2:224250:C0:C:0:301:300:305:A1:12020:0:0:0<br />
CNN:126250:C0:C:0:301:300:305:A1:28512:0:0:0<br />
BBC World:140250:C0:C:0:301:300:305:A1:8204:0:0:0<br />
arte:140250:C0:C:0:301:300:305:A1:28109:0:0:0<br />
MTV:147250:C0:C:0:301:300:305:A1:28653:0:0:0<br />
OK Flensburg:154250:C0:C:0:301:300:305:A1:40021:0:0:0<br />
SAT.1:161250:C0:C:0:301:300:305:A1:46:0:0:0<br />
RTL:168250:C0:C:0:301:300:305:A1:12003:0:0:0<br />
3sat:231250:C0:C:0:301:300:305:A1:28007:0:0:0<br />
VIVA:238250:C0:C:0:301:300:305:A1:12732:0:0:0<br />
n-tv:245250:C0:C:0:301:300:305:A1:12730:0:0:0<br />
N24:252250:C0:C:0:301:300:305:A1:47:0:0:0<br />
mdr:259250:C0:C:0:301:300:305:A1:28204:0:0:0<br />
Kinderkanal:266250:C0:C:0:301:300:305:A1:28008:0:0:0<br />
TV 5:266250:C0:C:0:301:300:305:A1:12240:0:0:0<br />
Bayerisches Fernsehen:273250:C0:C:0:301:300:305:A1:28107:0:0:0<br />
WDR:280250:C0:C:0:301:300:305:A1:28111:0:0:0<br />
Phoenix:287250:C0:C:0:301:300:305:A1:28114:0:0:0<br />
euronews:294250:C0:C:0:301:300:305:A1:28015:0:0:0<br />
NEUN LIVE:303250:C0:C:0:301:300:305:A1:897:0:0:0<br />
Terra Nova:311250:C0:C:0:301:300:305:A1:17033:0:0:0<br />
XXP:311250:C0:C:0:301:300:305:A1:17007:0:0:0<br />
Super RTL:319250:C0:C:0:301:300:305:A1:12040:0:0:0<br />
Bloomberg TV:327250:C0:C:0:301:300:305:A1:12160:0:0:0<br />
EUROSPORT:327250:C0:C:0:301:300:305:A1:28009:0:0:0<br />
Home Shopping Europe:335250:C0:C:0:301:300:305:A1:40:0:0:0<br />
TV TRAVEL SHOP:335250:C0:C:0:301:300:305:A1:13623:0:0:0<br />
QVC:415250:C0:C:0:301:300:305:A1:12100:0:0:0<br />
:AV-Eingaenge<br />
Composite (Chinch):1:C56:C:0:301:300:305:A1:65004:0:0:0<br />
Composite (Adapter):2:C0:C:0:301:300:305:A1:65005:0:0:0<br />
S-Video:3:C89:C:0:301:300:305:A1:65003:0:0:0<br />
</pre><br />
<br />
===D-76131 Karlsruhe (analogtv)===<br />
<pre><br />
:KabelBW in 76131 Karlsruhe<br />
:VDR-1.3.x, analogtv Plugin 0.9.37, ivtv 0.4.0, PVR250<br />
A-ARD:175250:C0D45B6:C:0:301:300:0:A0:28106:0:0:0<br />
A-ZDF:182250:C0D45B6:C:0:301:300:0:A0:28006:0:0:0<br />
A-SÜDWEST - BW:189250:C0D45B6:C:0:301:300:0:A0:28113:0:0:0<br />
A-R.TV:196250:C0D45B6:C:0:301:300:0:A0:12003:0:0:0<br />
A-RTL:203250:C0D45B6:C:0:301:300:0:A0:12003:0:0:0<br />
A-SAT.1:210250:C0D45B6:C:0:301:300:0:A0:46:0:0:0<br />
A-ProSieben:217250:C0D45B6:C:0:301:300:0:A0:898:0:0:0<br />
A-KABEL 1:224250:C0D45B6:C:0:301:300:0:A0:899:0:0:0<br />
A-Phoenix:471250:C0D45B6:C:0:301:300:0:A0:28114:0:0:0<br />
A-Kinderkanal:479250:C0D45B6:C:0:301:300:0:A0:28008:0:0:0<br />
A-NDR Nordmagazin:479250:C0D45B6:C:0:301:300:0:A0:28224:0:0:0<br />
A-3sat:487250:C0D45B6:C:0:301:300:0:A0:28007:0:0:0<br />
A-arte:495250:C0D45B6:C:0:301:300:0:A0:28109:0:0:0<br />
A-euronews:495250:C0D45B6:C:0:301:300:0:A0:8505:0:0:0<br />
A-TERRANOVA:503250:C0D45B6:C:0:301:300:0:A0:12003:0:0:0<br />
A-Infokanal Kabel BW:511250:C0D45B6:C:0:301:300:0:A0:12003:0:0:0<br />
A-WDR FERNSEHEN:519250:C0D45B6:C:0:301:300:0:A0:28111:0:0:0<br />
A-Nick:527250:C0D45B6:C:0:301:300:0:A0:29312:0:0:0<br />
A-France 3 Alsace:535250:C0D45B6:C:0:301:300:0:A0:8802:0:0:0<br />
A-RTL 2:126250:C0D45B6:C:0:301:300:0:A0:12020:0:0:0<br />
A-n-tv:133250:C0D45B6:C:0:301:300:0:A0:12730:0:0:0<br />
A-VOX:140250:C0D45B6:C:0:301:300:0:A0:12060:0:0:0<br />
A-VIVA:147250:C0D45B6:C:0:301:300:0:A0:12732:0:0:0<br />
A-DSF (dt. Sportfernsehen):154250:C0D45B6:C:0:301:300:0:A0:900:0:0:0<br />
A-TF 1 (franz.):161250:C0D45B6:C:0:301:300:0:A0:12003:0:0:0<br />
A-hessen fernsehen:168250:C0D45B6:C:0:301:300:0:A0:28108:0:0:0<br />
A-CNN Intern. (engl.):231250:C0D45B6:C:0:301:300:0:A0:28512:0:0:0<br />
A-Super RTL:238250:C0D45B6:C:0:301:300:0:A0:12040:0:0:0<br />
A-MTV CENTRAL:245250:C0D45B6:C:0:301:300:0:A0:28643:0:0:0<br />
A-EUROSPORT:252250:C0D45B6:C:0:301:300:0:A0:29310:0:0:0<br />
A-Bayerisches Fernsehen:259250:C0D45B6:C:0:301:300:0:A0:28107:0:0:0<br />
A-NBC (engl.):266250:C0D45B6:C:0:301:300:0:A0:29202:0:0:0<br />
A-mdr Fernsehen:273250:C0D45B6:C:0:301:300:0:A0:28204:0:0:0<br />
A-CNBC:273250:C0D45B6:C:0:301:300:0:A0:28010:0:0:0<br />
A-NEUN LIVE:280250:C0D45B6:C:0:301:300:0:A0:897:0:0:0<br />
A-HSE24:287250:C0D45B6:C:0:301:300:0:A0:45:0:0:0<br />
A-VIVA PLUS:294250:C0D45B6:C:0:301:300:0:A0:12120:0:0:0<br />
A-BBC World (engl.):294250:C0D45B6:C:0:301:300:0:A0:17007:0:0:0<br />
A-TELE 5:303250:C0D45B6:C:0:301:300:0:A0:12003:0:0:0<br />
A-Sonnenklar TV:311250:C0D45B6:C:0:301:300:0:A0:12003:0:0:0<br />
A-XXP Das Metropolen Programm:319250:C0D45B6:C:0:301:300:0:A0:12003:0:0:0<br />
A-Bloomberg TV:327250:C0D45B6:C:0:301:300:0:A0:12721:0:0:0<br />
A-N24:335250:C0D45B6:C:0:301:300:0:A0:47:0:0:0<br />
A-QVC:415250:C0D45B6:C:0:301:300:0:A0:12100:0:0:0<br />
A-svideo:1:C0D67B6:C:0:160:80:0:A0:65002:0:0:1<br />
A-composite:1:C0D0B6:C:0:160:80:0:A0:65003:0:0:1<br />
</pre><br />
[[Kategorie:AnalogTV]]<br />
<br />
<!--Link to german page--><br />
[[de:Channels.conf_analog]]</div>Wirbelhttps://www.linuxtv.org/vdrwiki/index.php?title=Main_Page&diff=6575Main Page2014-04-20T13:24:07Z<p>Wirbel: </p>
<hr />
<div>{{VDRWiki Header(Standard)|Welcome to VDR Wiki!|[[VDR_Wiki:Portal|Proceed to VDR Wiki Portal >]]}}<br />
{| width="100%" cellspacing="0"<br />
|- valign="top"<br />
| width="50%" |<br />
<br />
<!-- *B*A*S*I*C*S* --><br />
<div style="border: solid 1px #cccccc; padding: 0px; margin: 5px;"><br />
<div style="background-color: #eeeeee; padding: 0.4em; border-bottom:1px solid #cccccc;" id="Introduction"><br />
[[Image:nuvola_edu_miscellaneous.png|right|Introduction]] '''Introduction'''<br />
</div><br />
{|valign=top cellpadding=0 cellspacing=5 width=100%<br />
|align=left valign=top width=50%|<br />
* [[Introduction|What is VDR?]] - The Main Features of VDR<br />
* [[VDR User's Manual]] <br />
<br />
|-<br />
|align=left valign=top width=50%|<br />
* '''Allgemein'''<br />
** [[Linux for beginners]] - Informations for Newbies<br />
** [[TV applications|Other TV Applications]]<br />
** [[Commercial solutions]]<br />
<br />
|-<br />
|align=left valign=top width=50%|<br />
* [[FAQ]] - Frequently Asked Questions<br />
* [[Glossary]] - Important Definitions<br />
|}<br />
</div><br />
<!-- *D*O*W*N*L*O*A*D* --><br />
<div style="border: solid 1px #cccccc; padding: 0px; margin: 5px;"><br />
<div style="background-color: #ffffdd; padding: 0.4em; border-bottom:1px solid #cccccc;" id="Download"><br />
[[Image:nuvola_filesave.png|right|Hotties]] '''Download'''<br />
</div><br />
{|valign=top cellpadding=0 cellspacing=5 width=100%<br />
|align=left valign=top width=50%|<br />
* [ftp://ftp.tvdr.de/vdr/vdr-current.tar.bz2 latest stable VDR version]<br />
|}<br />
</div><br />
<br />
<!-- *NEWS* (only if necessary) --><br />
<div style="border: solid 1px #cccccc; padding: 0px; margin: 5px;"><br />
<div style="background-color: #ffa7a7; padding: 0.4em; border-bottom:1px solid #cccccc;" id="News"><br />
[[Image:nuvola_date.png|right|Events]] '''News'''<br />
</div><br />
{|valign=top cellpadding=0 cellspacing=5 width=100%<br />
|align=left valign=top width=50%|<br />
* '''wiki announcement'''<br />
: Starting from 19-Apr-2014, new vdr wiki accouts needs to be confirmed by an wiki admin.<br />
|}<br />
</div><br />
<br />
| width="50%" |<br />
<br />
<!-- *H*A*R*D*W*A*R*E* --><br />
<div style="border: solid 1px #cccccc; padding: 0px; margin: 5px;"><br />
<div style="background-color: #ccaaaa; padding: 0.4em; border-bottom:1px solid #cccccc;" id="Hardware"><br />
[[Image:nuvola_ksim.png|right|Hardware]] '''[[Overview_Hardware|Hardware]]'''<br />
</div><br />
{|valign=top cellpadding=0 cellspacing=5 width=100%<br />
|align=left valign=top width=50%|<br />
* '''TV/Video'''<br />
** [[Input_devices|Input Devices]] - Satellite Cards,...<br />
** [[Output_devices|Output Devices]] - MPEG Decoder Cards,...<br />
<br />
|-<br />
|align=left valign=top width=50%|<br />
* '''Computer'''<br />
** [[Case]]<br />
** [[Overview_Hardware#Computer|Basic Components]] - Mainboard, CPU,...<br />
** [[Overview_Hardware#Computer|Additional Components]] - LCD, Remote Control,...<br />
<br />
|-<br />
|align=left valign=top width=50%|<br />
* [[Overview_Hardware#Receiving_installation|Receiving Installation]] - Antenna, Modulator,...<br />
* [[Overview_Hardware#Hi-fi_system|Hi-fi System]] - Dolby-Digital Receiver,...<br />
* [[Overview_Hardware#Modifications_/_Extensions|Modifications and Extensions]]<br />
|}<br />
</div><br />
<br />
<!-- *S*O*F*T*W*A*R*E* --><br />
<div style="border: solid 1px #cccccc; padding: 0px; margin: 5px;"><br />
<div style="background-color: #aaccaa; padding: 0.4em; border-bottom:1px solid #cccccc;" id="Software"><br />
[[Image:nuvola_kpager.png|right|Software]] '''[[Overview_Software|Software]]'''<br />
</div><br />
{|valign=top cellpadding=0 cellspacing=5 width=100%<br />
|align=left valign=top width=50%|<br />
* '''VDR'''<br />
** [[Overview_Software#VDR|Basis]] - VDR, DVB Driver,...<br />
** [[Plugins]] - Plugins for VDR<br />
*** [[Plugins|alphabetically]]<br />
*** [[Plugins_by_topic|by category]]<br />
** [[Patches]]<br />
<br />
|-<br />
|align=left valign=top width=50%|<br />
* [[Overview_Software#Additional_software|Additional Software]] - LIRC, Scripts,...<br />
* [[Overview_Software#Distributions|Distributions]]<br />
* [[Overview_Software#Development|Development]]<br />
|}<br />
</div><br />
<br />
|}<br />
<br />
<!-- *N*A*V*I*G*A*T*I*O*N* --><br />
{{VDRWiki Footer}}<br />
<br />
[[de:]]<br />
[[es:]]<br />
[[fr:]]<br />
[[it:]]<br />
[[ru:]]<br />
<br />
__NOTOC__<br />
__NOEDITSECTION__</div>Wirbelhttps://www.linuxtv.org/vdrwiki/index.php?title=Dvdselect_writedvd.sh&diff=6563Dvdselect writedvd.sh2014-02-11T17:12:57Z<p>Wirbel: </p>
<hr />
<div>See [[dvdselect-plugin]].<br />
<br />
{{Box File | [[Struktur|$PATH]]/dvdselect_writedvd.sh |<br />
<pre><br />
#!/bin/sh<br />
#<br />
# dvdselect_writedvd.sh<br />
#<br />
# source: dvdselect-plugin<br />
#<br />
# This script will by called by the vdr-plugin dvdselect to copy a DVD to<br />
# write a dvd iso image.<br />
#<br />
# It gets the following parameter:<br />
#<br />
# $1 = filename of the iso file<br />
<br />
echo "dvdrecord -eject -v dev=0,0,0 speed=4 -dao $1 > /var/log/vdr/writedvd.log 2>&1" | at now<br />
</pre><br />
}}<br />
<br />
{{Box File | [[Struktur|$PATH]]/dvdselect_writedvd.sh |<br />
<pre><br />
#!/bin/sh<br />
#<br />
# source: http://www.hoochvdr.info<br />
#<br />
# $1 = filename of the iso file<br />
<br />
DVD_RECORDCMD="growisofs"<br />
DVDPLUS_RECORD_OPTS="-dvd-compat -Z"<br />
DVDWRITER=/dev/hdc<br />
<br />
echo " \<br />
unset SUDO_COMMAND ; \<br />
svdrpsend.pl -d localhost "MESG DVD burn initiated" 2>/dev/null 1>/dev/null ; \<br />
svdrpsend.pl -d localhost "QUIT" 2>/dev/null 1>/dev/null ; \<br />
exec $DVD_RECORDCMD $DVDPLUS_RECORD_OPTS $DVDWRITER=$1 ; \<br />
svdrpsend.pl -d localhost "MESG DVD burn completed" 2>/dev/null 1>/dev/null ; \<br />
svdrpsend.pl -d localhost "QUIT" 2>/dev/null 1>/dev/null ; \<br />
"| at now<br />
</pre><br />
}}<br />
<br />
{{Box File | [[Struktur|$PATH]]/dvdselect_writedvd.sh |<br />
<pre><br />
#!/bin/sh<br />
#<br />
# source: http://www.hoochvdr.info<br />
#<br />
# Angepasst für LinVDR 0.7, da es kein at-Kommando gibt<br />
# Modified for LinVDR 0.7, because there is no at-command available<br />
#<br />
# $1 = filename of the iso file<br />
<br />
DVD_RECORDCMD="growisofs"<br />
DVDPLUS_RECORD_OPTS="-dvd-compat -Z"<br />
DVDWRITER=/dev/hdc<br />
<br />
echo " \<br />
svdrpsend.pl -d localhost "MESG DVD brennen gestartet" 2>/dev/null 1>/dev/null ; \<br />
$DVD_RECORDCMD $DVDPLUS_RECORD_OPTS $DVDWRITER=\"$1\" ; \<br />
svdrpsend.pl -d localhost "MESG DVD fertig" 2>/dev/null 1>/dev/null ; \<br />
" > /tmp/dvdselect-burn-temp.sh<br />
<br />
chmod 700 /tmp/dvdselect-burn-temp.sh<br />
/tmp/dvdselect-burn-temp.sh &<br />
</pre><br />
}}<br />
<br />
{{Box File | [[Struktur|$PATH]]/dvdselect_writedvd.sh |<br />
<pre><br />
#!/bin/sh<br />
#<br />
# This script will be called by the vdr-plugin dvdselect<br />
# to write a dvd iso image.<br />
#<br />
# It gets the following parameter:<br />
#<br />
# $1 = filename of the iso file<br />
#<br />
# Erweiterung: 2005-01-18 Claus.Thiemann (at) gmx.de<br />
# Nutzung eines installierten vdrconvert zum Brennen<br />
# Die Variablen muessen an die verwendete Distribution angepasst werden<br />
<br />
BASENAME="$(basename $0)"<br />
CONF=/etc/vdr/vdrconvert/vdrconvert.dvd.conf<br />
ISO="$1"<br />
JOB=/var/spool/vdrconvert/burn<br />
SVDRP=/usr/lib/vdr/svdrpsend.pl<br />
<br />
function f_check_file() {<br />
# Gibts die Datei?<br />
[ -s $1 ] && return 0<br />
# Meldung ausgeben auf TV und SysLog<br />
MSG="$1 nicht gefunden"<br />
# und zwar im Hintergrund wegen Broken Pipe Problem<br />
$SVDRP MESG $MSG > /dev/null &<br />
echo $MSG ; sleep 3<br />
return 1<br />
}<br />
<br />
function f_check_job() {<br />
# Gibts die Datei noch nicht oder ist sie leer?<br />
[ -s $1 ] || return 0<br />
MSG="$1 ist nicht leer"<br />
$SVDRP MESG $MSG > /dev/null &<br />
echo $MSG ; sleep 3<br />
return 1<br />
}<br />
<br />
function f_init_burn() {<br />
# "Sourcen" der Konfiguration<br />
. $CONF<br />
[ -z "$CDSIZE" ] && CDSIZE=700<br />
SIZE=$(ls -al $ISO | awk '{print $5}')<br />
SIZE=$[$SIZE/1048576]<br />
[ $SIZE -le $CDSIZE ] && TYP="MINIDVD" || TYP="DVD"<br />
[ $MINIDVD != "yes" ] && TYP="DVD"<br />
MSG="$(basename $ISO) ($SIZE MB) wird als $TYP gebrannt..."<br />
$SVDRP MESG $MSG > /dev/null &<br />
echo $MSG ; sleep 3<br />
echo "$ISO:$TYP:" > $JOB<br />
return 0<br />
}<br />
<br />
f_main() {<br />
f_check_file $SVDRP || return<br />
f_check_file $CONF || return<br />
f_check_file $ISO || return<br />
f_check_job $JOB || return<br />
f_init_burn<br />
}<br />
<br />
# Aufruf der Haupt-Funktion mit oder ohne Syslog<br />
#f_main<br />
f_main | logger -i -t $BASENAME<br />
<br />
# EOF<br />
</pre><br />
}}<br />
<br />
{{Box File | [[Struktur|$PATH]]/dvdselect_writedvd.sh |<br />
<pre><br />
#!/bin/sh<br />
#<br />
# This script will by called by the vdr-plugin dvdselect to copy a DVD to<br />
# write a dvd iso image.<br />
#<br />
# It gets the following parameter:<br />
#<br />
# $1 = filename of the iso file<br />
#<br />
# 10/10/2006 - st_barszus.at.gmx.de - thanks to wilderigel, Bert etc at vdrportal :-) <br />
# * made sure that we don't give more then 32 as Volume name for dvd direcory<br />
#<br />
# Extended write/burn script for dvdselect and dvdswitch<br />
#<br />
######################################<br />
<br />
SVDRPSEND=/usr/lib/vdr/svdrpsend.pl<br />
DVDWRITER=/dev/hdd<br />
<br />
######################################<br />
<br />
cleanup () {<br />
$SVDRPSEND mesg "$1"<br />
logger -t $0 "$1"<br />
logger -t $0 < $CHECKFILE<br />
rm -f $CHECKFILE<br />
eject $DVDWRITER<br />
exit 0<br />
}<br />
<br />
isminusrw () {<br />
MEDIA="`grep "^ Mounted Media" $CHECKFILE | cut -d" " -f13`"<br />
[ -z $MEDIA ] && cleanup<br />
[ "$MEDIA" = "DVD-RW" ] && return 0 || return 1<br />
}<br />
<br />
isplusrw () {<br />
MEDIA="`grep "^ Mounted Media" $CHECKFILE | cut -d" " -f13`"<br />
[ -z $MEDIA ] && cleanup<br />
[ "$MEDIA" = "DVD+RW" ] && return 0 || return 1<br />
}<br />
<br />
<br />
dvd_isempty () {<br />
USED="`grep "^ Disc status" $CHECKFILE | cut -d":" -f2 | sed -e ' s/ //g'`"<br />
<br />
case $USED in<br />
blank|appendable)<br />
return 0 ;;<br />
*)<br />
return 1 ;;<br />
esac<br />
}<br />
<br />
<br />
have_media () {<br />
[ -z "`grep \"^:-( no media\" $CHECKFILE`" ] && return 0 || return 1<br />
}<br />
<br />
### start skript<br />
# close if the drive is open<br />
eject -t $DVDWRITER<br />
<br />
# what is in the drive ?<br />
CHECKFILE=`mktemp`<br />
dvd+rw-mediainfo $DVDWRITER &> $CHECKFILE<br />
<br />
if ! have_media ; then<br />
cleanup "No Media found."<br />
fi<br />
<br />
if ! dvd_isempty ; then<br />
if isminusrw ; then<br />
# only DVD-RW need to be formated again, DVD+RW can get just overwritten<br />
echo " ( dvd+rw-format $DVDWRITER -force ) " | at now<br />
else<br />
if ! isplusrw ; then<br />
cleanup "Media full. Insert empty media."<br />
fi<br />
fi<br />
fi<br />
<br />
if [ -d "$1" ]; then<br />
NAME="`basename \"$1\"`"<br />
<br />
# write dvd structure<br />
echo "while [ \"x`pgrep -o dvd.rw`\" != \"x\" ] ;do sleep 2; done && growisofs -use-the-force-luke=tty -dvd-compat -Z $DVDWRITER -dvd-video -V \"<br />
${NAME:0:31}\" \"$1\" && eject " | at now<br />
else<br />
if [ -f "$1" ]; then<br />
# write dvd image<br />
echo "while [ \"x`pgrep -o dvd.rw`\" != \"x\"] ;do sleep 2; done && growisofs -dvd-compat -use-the-force-luke=tty -Z $DVDWRITER=\"$1\" &&<br />
eject " | at now<br />
else<br />
cleanup "File: \"$1\" not found."<br />
fi<br />
fi<br />
<br />
# cleanup after all was successfull<br />
$SVDRPSEND mesg "Start writing to media."<br />
rm -f $CHECKFILE<br />
</pre><br />
}}<br />
<br />
[[Category:Scripts]]<br />
{{i18n|Dvdselect writedvd.sh}}</div>Wirbelhttps://www.linuxtv.org/vdrwiki/index.php?title=Vdradmin&diff=6562Vdradmin2014-02-11T17:12:24Z<p>Wirbel: </p>
<hr />
<div>==Description==<br />
VDR-Admin is a daemon that communicates with VDR and shows informations in a Internet browser which opens the adress of the VDR computer with port 8001. In a Config file is set, which computers are allowed to access vdr-admin. Authentication is nessessary, but can be disabled with a [http://www.vdrportal.de/board/thread.php?threadid=7314 patch].<br />
<br />
A (non-offical) improved version is [[Vdradmin AM]].<br />
<br />
==Images==<br />
{|<br />
| [[Bild:admin-whatson.jpg|thumb|none|''What's on?'']]<br />
| [[Bild:admin-channels.jpg|thumb|none|''Channels'']]<br />
| [[Bild:admin-timers.jpg|thumb|none|''Timers'']]<br />
|-<br />
| [[Bild:admin-recordings.jpg|thumb|none|''Recordings'']]<br />
| [[Bild:admin-configuration.jpg|thumb|none|''Configuration'']]<br />
| [[Bild:admin-tvremote.jpg|thumb|none|''Remote Control'']]<br />
|}<br />
<br />
<!-- ==Hardware requirements== --><br />
<br />
==Software requirements==<br />
* Browser at client site.<br />
* Perl with modul '''perl-Compress-Zlib'''.<br />
<br />
==Installation==<br />
'''perl-Compress-Zlib''' (should be included in most distris):<br />
<pre><br />
perl -MCPAN -e 'install Compress::Zlib'<br />
</pre><br />
Oder per Source:<br />
<pre><br />
cd $SOURCEDIR<br />
tar zxvf Compress-Zlib-<VERSION>.tar.gz<br />
cd Compress-Zlib-<VERSION><br />
perl Makefile.PL<br />
make<br />
make test<br />
make install<br />
</pre><br />
for vdr-admin-am [http://xpix.dieserver.de] only additionally '''Template''':<br />
<pre><br />
perl -MCPAN -e 'install Template'<br />
</pre><br />
Source:<br />
<pre><br />
cd $SOURCEDIR<br />
tar zxvf Template-Toolkit-<VERSION>.tar.gz<br />
cd Template-Toolkit-<VERSION><br />
perl Makefile.PL<br />
make<br />
make test<br />
make install<br />
</pre><br />
VDR-Admin:<br />
<pre><br />
cd $SOURCEDIR<br />
tar xvz vdradmin-<VERSION>.tar.gz<br />
mv vdradmin-<VERSION> vdradmin<br />
cd vdradmin<br />
touch vdradmind.conf<br />
./vdradmind.pl -c<br />
# What's your VDR hostname (e.g video.intra.net)? [localhost]:<br />
# What's the port VDR listen to SVDRP query's? [2001]:<br />
# On which address should vdradmin listen (0.0.0.0 for any)? [0.0.0.0]:<br />
# On which port should vdradmin answer? [8001]:<br />
# Username? [linvdr]: ente<br />
# Password? [linvdr]: ************<br />
# Config file sucessfull written.<br />
</pre><br />
<br />
==Problems==<br />
===CPU Load===<br />
While VDR-Admin loads Data via SVDRP, CPU Load rises up to 99%, VDR is not usable this time.<br />
<br />
===No EPG-Data===<br />
VDR-Admin should be started after VDR, otherwise it takes some minutes to display that data. With calling inside [[runvdr]] the problem can be solved.<br />
<br />
For example inside the "while (true) do" - Loop this line /usr/local/bin/runvdr which starts vdr-admin two minutes delayed:<br />
<br />
echo "su vdr -c /usr/local/bin/vdradmind.pl" | at now + 2 minutes<br />
<br />
===Missing recording directories===<br />
One known reason is that in VDR Options the format can be choosen that way that recording time or length are missing. This case vdradmin will stop gathering information from that recording.<br />
<br />
===Errors while starting vdradmin===<br />
<pre><br />
vdrserver vdradmin # ./vdradmind.pl<br />
Compress::Zlib object version 1.22 does not match bootstrap parameter 1.33 at &#8976;<br />
/usr/lib/perl5/5.8.4/i686-linux/DynaLoader.pm line 253.<br />
Compilation failed in require at ./vdradmind.pl line 139.<br />
BEGIN failed--compilation aborted at ./vdradmind.pl line 139.<br />
</pre><br />
This case you should update zlib:<br />
<pre><br />
vdrserver vdradmin # cpan update Compress::Zlib<br />
</pre><br />
<br />
===Wrong time in VDR===<br />
see [http://www.vdr-portal.de/board/thread.php?threadid=44367&sid=&hilight=vdradmin+1970]<br />
<br><br />
<br />
Suchen in vdradmin.pl nach der Zeile die dies beinhaltet:<br><br />
" if(/^E (.*) (.*) (.*) (.*)/ || /^E (.*) (.*) (.*)/) { "<br><br />
(im letzten VDRadmin 0.96 ist es die zeile 552, und VDRadminNG 0.97 die 739)<br><br />
diese muss durch das hier ersetzt werden:<br><br />
" if(/^E (.*) (.*) (.*) (.*) (.*)/ || /^E (.*) (.*) (.*) (.*)/ || /^E (.*) (.*) (.*)/) { "<br><br />
und dann tuts.<br><br />
<br />
==Hints==<br />
===Vdr-Admin Start on Client===<br />
A link should look like this:<br />
<pre><br />
http://linvdr:linvdr@192.168.0.2:8001<br />
</pre><br />
<br />
===Access from Internet===<br />
Change the standard password of vdr-admin!<br />
The proxy module must be started:<br />
<br />
Change<br />
# LoadModule proxy_module /usr/lib/apache/1.3/libproxy.so<br />
in<br />
LoadModule proxy_module /usr/lib/apache/1.3/libproxy.so<br />
<br />
<br />
Inside [[Apache]]'s httpd.conf append:<br />
<pre><br />
ProxyPass /vdr/vdradmin/ http://VDRip:8001/<br />
ProxyPassReverse /vdr/vdradmin/ http://VDRip:8001/<br />
</pre><br />
<br />
<br />
<br />
==Links==<br />
# [http://template-toolkit.org/download.html Perl::Template]<br />
# [http://www.cpan.org/modules/by-module/Compress Perl::Compress::Zlib ]<br />
# [http://linvdr.org/download/vdradmin Homepage VDR-Admin]<br />
# [http://vdrportal.de/board/thread.php?threadid=43255&sid= iTAN Extension for Vdradmin]<br />
# [http://xpix.dieserver.de xpix Extension for Vdradmin]<br />
# [http://sites.inka.de/~bigred/sw/vdr.html Vdrepg -> Vdradmin alternative (needs JDK 1.4)]<br />
<br />
[[Category:Scripts]]<br />
{{i18n|vdradmin}}</div>Wirbelhttps://www.linuxtv.org/vdrwiki/index.php?title=Pvrinput-plugin&diff=6558Pvrinput-plugin2013-12-31T13:57:43Z<p>Wirbel: /* Links */</p>
<hr />
<div>==Description==<br />
'''original Author:''' Andreas Regel<br />
<br />
'''current development:''' Martin Dauskardt, Lars Hanisch <br />
<br />
This plugin allows you to use analogue TV with a ivtv supported [[HauppaugePVR|PVR-card]] with integrated hardware MPEG encoder.<br />
Please use the most recent versions of this plugin.<br />
<br />
Channel scanning for this plugin can be done using the command line tool [[w_pvrscan]] or with using the [[wirbelscan-plugin]].<br />
<br />
==Pictures==<br />
<!-- [[Bild:pvrinput-plugin-00.jpg|thumb|none|''pvrinput setup dialog'']] --><br />
<br />
==Hardware Requirements==<br />
* ivtv supported [[HauppaugePVR|PVR card]] with integrated hardware encoder<br />
**PVR150<br />
**PVR250<br />
**PVR350<br />
**PVR500<br />
**PVR USB2<br />
**HVR 1900<br />
**HD PVR<br />
<br />
NOTE: ivtv supports more compatible cards, which could be possibly supported in this plugin, if someone had such card and implement it.<br><br />
NOTE: blackbird type cards as HVR-1300 doesnt work properly with this plugin.<br />
<br />
==Software Requirements==<br />
* kernel driver for your hardware encoder based TV card:<br />
** '''ivtv''' for Hauppauge PVR150/250/350/500 or..<br />
** '''pvrusb2''' for Hauppauge PVR USB2 and HVR 1900/1950 or..<br />
** '''hdpvr''' for HD PVR<br />
<br />
==Installation==<br />
* vdr < 1.7.13 needs patch (see plugin source code)<br />
<br />
<!-- ==Optionen== --><br />
<!-- ==Patches== --><br />
<!-- ==Konfiguration== --><br />
<!-- ==Parameter== --><br />
<!-- ==Bedienung== --><br />
==Problems==<br />
<br />
<!--==CVS== --><br />
==Links==<br />
# [http://projects.vdr-developer.org/projects/show/plg-pvrinput pvrinput git repository]<br />
<br />
[[Category:Plugins]][[Category:AnalogTV]]<br />
<br />
{{i18n|pvrinput-plugin}}</div>Wirbelhttps://www.linuxtv.org/vdrwiki/index.php?title=Pvrinput-plugin&diff=6557Pvrinput-plugin2013-12-31T13:56:17Z<p>Wirbel: /* Hardware Requirements */</p>
<hr />
<div>==Description==<br />
'''original Author:''' Andreas Regel<br />
<br />
'''current development:''' Martin Dauskardt, Lars Hanisch <br />
<br />
This plugin allows you to use analogue TV with a ivtv supported [[HauppaugePVR|PVR-card]] with integrated hardware MPEG encoder.<br />
Please use the most recent versions of this plugin.<br />
<br />
Channel scanning for this plugin can be done using the command line tool [[w_pvrscan]] or with using the [[wirbelscan-plugin]].<br />
<br />
==Pictures==<br />
<!-- [[Bild:pvrinput-plugin-00.jpg|thumb|none|''pvrinput setup dialog'']] --><br />
<br />
==Hardware Requirements==<br />
* ivtv supported [[HauppaugePVR|PVR card]] with integrated hardware encoder<br />
**PVR150<br />
**PVR250<br />
**PVR350<br />
**PVR500<br />
**PVR USB2<br />
**HVR 1900<br />
**HD PVR<br />
<br />
NOTE: ivtv supports more compatible cards, which could be possibly supported in this plugin, if someone had such card and implement it.<br><br />
NOTE: blackbird type cards as HVR-1300 doesnt work properly with this plugin.<br />
<br />
==Software Requirements==<br />
* kernel driver for your hardware encoder based TV card:<br />
** '''ivtv''' for Hauppauge PVR150/250/350/500 or..<br />
** '''pvrusb2''' for Hauppauge PVR USB2 and HVR 1900/1950 or..<br />
** '''hdpvr''' for HD PVR<br />
<br />
==Installation==<br />
* vdr < 1.7.13 needs patch (see plugin source code)<br />
<br />
<!-- ==Optionen== --><br />
<!-- ==Patches== --><br />
<!-- ==Konfiguration== --><br />
<!-- ==Parameter== --><br />
<!-- ==Bedienung== --><br />
==Problems==<br />
<br />
<!--==CVS== --><br />
==Links==<br />
{|<br />
| [1]<br />
| [http://projects.vdr-developer.org/projects/show/plg-pvrinput pvrinput git repository]<br />
| pvrinput git repo<br />
|-<br />
| [2]<br />
| [http://vdr-portal.de/board/thread.php?postid=901958 Announce Thread for pvrinput-2010-04-03-rc1 (German vdrportal-Forum)] <br />
| Announce Thread for pvrinput-2010-04-03-rc1 (German vdrportal-Forum; just try english if you dont speak german..)<br />
|-<br />
|}<br />
<br />
[[Category:Plugins]][[Category:AnalogTV]]<br />
<br />
{{i18n|pvrinput-plugin}}</div>Wirbelhttps://www.linuxtv.org/vdrwiki/index.php?title=Pvrinput-plugin&diff=6556Pvrinput-plugin2013-12-31T13:56:05Z<p>Wirbel: /* Hardware Requirements */</p>
<hr />
<div>==Description==<br />
'''original Author:''' Andreas Regel<br />
<br />
'''current development:''' Martin Dauskardt, Lars Hanisch <br />
<br />
This plugin allows you to use analogue TV with a ivtv supported [[HauppaugePVR|PVR-card]] with integrated hardware MPEG encoder.<br />
Please use the most recent versions of this plugin.<br />
<br />
Channel scanning for this plugin can be done using the command line tool [[w_pvrscan]] or with using the [[wirbelscan-plugin]].<br />
<br />
==Pictures==<br />
<!-- [[Bild:pvrinput-plugin-00.jpg|thumb|none|''pvrinput setup dialog'']] --><br />
<br />
==Hardware Requirements==<br />
* ivtv supported [[HauppaugePVR|PVR card]] with integrated hardware encoder<br />
**PVR150<br />
**PVR250<br />
**PVR350<br />
**PVR500<br />
**PVR USB2<br />
**HVR 1900<br />
**HD PVR<br />
<br />
NOTE: ivtv supports more compatible cards, which could be possibly supported in this plugin, if someone had such card and implement it.<br />
NOTE: blackbird type cards as HVR-1300 doesnt work properly with this plugin.<br />
<br />
==Software Requirements==<br />
* kernel driver for your hardware encoder based TV card:<br />
** '''ivtv''' for Hauppauge PVR150/250/350/500 or..<br />
** '''pvrusb2''' for Hauppauge PVR USB2 and HVR 1900/1950 or..<br />
** '''hdpvr''' for HD PVR<br />
<br />
==Installation==<br />
* vdr < 1.7.13 needs patch (see plugin source code)<br />
<br />
<!-- ==Optionen== --><br />
<!-- ==Patches== --><br />
<!-- ==Konfiguration== --><br />
<!-- ==Parameter== --><br />
<!-- ==Bedienung== --><br />
==Problems==<br />
<br />
<!--==CVS== --><br />
==Links==<br />
{|<br />
| [1]<br />
| [http://projects.vdr-developer.org/projects/show/plg-pvrinput pvrinput git repository]<br />
| pvrinput git repo<br />
|-<br />
| [2]<br />
| [http://vdr-portal.de/board/thread.php?postid=901958 Announce Thread for pvrinput-2010-04-03-rc1 (German vdrportal-Forum)] <br />
| Announce Thread for pvrinput-2010-04-03-rc1 (German vdrportal-Forum; just try english if you dont speak german..)<br />
|-<br />
|}<br />
<br />
[[Category:Plugins]][[Category:AnalogTV]]<br />
<br />
{{i18n|pvrinput-plugin}}</div>Wirbelhttps://www.linuxtv.org/vdrwiki/index.php?title=Pvrinput-plugin&diff=6555Pvrinput-plugin2013-12-31T13:53:23Z<p>Wirbel: /* Software Requirements */</p>
<hr />
<div>==Description==<br />
'''original Author:''' Andreas Regel<br />
<br />
'''current development:''' Martin Dauskardt, Lars Hanisch <br />
<br />
This plugin allows you to use analogue TV with a ivtv supported [[HauppaugePVR|PVR-card]] with integrated hardware MPEG encoder.<br />
Please use the most recent versions of this plugin.<br />
<br />
Channel scanning for this plugin can be done using the command line tool [[w_pvrscan]] or with using the [[wirbelscan-plugin]].<br />
<br />
==Pictures==<br />
<!-- [[Bild:pvrinput-plugin-00.jpg|thumb|none|''pvrinput setup dialog'']] --><br />
<br />
==Hardware Requirements==<br />
* ivtv supported [[HauppaugePVR|PVR card]] with integrated hardware encoder<br />
**PVR150<br />
**PVR250<br />
**PVR350<br />
**PVR500<br />
**PVRUSB2 (since 2008-06-01)<br />
**HVR 1900 (since 2008-06-01)<br />
**HD PVR (since Version 2010-03-27-rc1)<br />
<br />
==Software Requirements==<br />
* kernel driver for your hardware encoder based TV card:<br />
** '''ivtv''' for Hauppauge PVR150/250/350/500 or..<br />
** '''pvrusb2''' for Hauppauge PVR USB2 and HVR 1900/1950 or..<br />
** '''hdpvr''' for HD PVR<br />
<br />
==Installation==<br />
* vdr < 1.7.13 needs patch (see plugin source code)<br />
<br />
<!-- ==Optionen== --><br />
<!-- ==Patches== --><br />
<!-- ==Konfiguration== --><br />
<!-- ==Parameter== --><br />
<!-- ==Bedienung== --><br />
==Problems==<br />
<br />
<!--==CVS== --><br />
==Links==<br />
{|<br />
| [1]<br />
| [http://projects.vdr-developer.org/projects/show/plg-pvrinput pvrinput git repository]<br />
| pvrinput git repo<br />
|-<br />
| [2]<br />
| [http://vdr-portal.de/board/thread.php?postid=901958 Announce Thread for pvrinput-2010-04-03-rc1 (German vdrportal-Forum)] <br />
| Announce Thread for pvrinput-2010-04-03-rc1 (German vdrportal-Forum; just try english if you dont speak german..)<br />
|-<br />
|}<br />
<br />
[[Category:Plugins]][[Category:AnalogTV]]<br />
<br />
{{i18n|pvrinput-plugin}}</div>Wirbelhttps://www.linuxtv.org/vdrwiki/index.php?title=Analogtv-plugin&diff=6554Analogtv-plugin2013-12-31T13:50:14Z<p>Wirbel: </p>
<hr />
<div>==Description==<br />
'''Author:''' Andreas Kool<br />
<br />
[[Image:Analogtv-plugin(setup).jpg|thumb|Setup]]<br />
<br />
The ''analogtv plugin'' was the first Plugin supporting analog TV with VDR.<br />
<br />
{{Box Info|'''DO NOT POINT TO THIS PLUGIN ANY LONGER IN VDR RELATED WIKIs.'''<br>It is unmaintained for years, has no homepage or download any more, no longer working and not compiling with newer versions of VDR. Please use and suggest the [[pvrinput-plugin]] instead.}}<br />
<br />
==Installation==<br />
* NOT POSSIBLE WITHOUT DEEPLY TOUCHING PLUGINS SOURCE. Use the [[pvrinput-plugin]] instead. <br />
<br />
==Links==<br />
<br />
[[Category:Outdated_Plugins]]</div>Wirbelhttps://www.linuxtv.org/vdrwiki/index.php?title=Analogtv-plugin&diff=6553Analogtv-plugin2013-12-31T13:48:07Z<p>Wirbel: </p>
<hr />
<div>==Description==<br />
[[Image:Analogtv-plugin(setup).jpg|thumb|Setup]]<br />
<br />
The '''analogtv plugin''' was the first Plugin supporting analog TV with VDR.<br />
<br />
{{Box Info|'''DO NOT POINT TO THIS PLUGIN ANY LONGER IN VDR RELATED WIKIs.'''<br>It is unmaintained for years, has no homepage or download any more, no longer working and not compiling with newer versions of VDR. Please use the [[pvrinput-plugin]] instead.}}<br />
<br />
==Installation==<br />
* NOT POSSIBLE WITHOUT DEEPLY TOUCHING PLUGINS SOURCE. Use the [[pvrinput-plugin]] instead. <br />
<br />
==Links==<br />
<br />
[[Category:Outdated_Plugins]]</div>Wirbelhttps://www.linuxtv.org/vdrwiki/index.php?title=Analogtv-plugin&diff=6552Analogtv-plugin2013-12-31T13:47:25Z<p>Wirbel: </p>
<hr />
<div>==Description==<br />
[[Image:Analogtv-plugin(setup).jpg|thumb|Setup]]<br />
<br />
The '''analogtv plugin''' was the first Plugin supporting analog TV with VDR.<br />
<br />
{{Box Info|'''DO NOT POINT TO THIS PLUGIN ANY LONGER IN VDR RELATED WIKIs.'''<br>It is umaintained for years, has no homepage or download any more, no longer working and not compiling with newer versions of VDR. Please use the [[pvrinput-plugin]] instead.}}<br />
<br />
==Installation==<br />
* NOT POSSIBLE WITHOUT DEEPLY TOUCHING PLUGINS SOURCE. Use the [[pvrinput-plugin]] instead. <br />
<br />
==Links==<br />
<br />
[[Category:Outdated_Plugins]]</div>Wirbelhttps://www.linuxtv.org/vdrwiki/index.php?title=Extrecmenu-plugin&diff=6551Extrecmenu-plugin2013-12-08T18:22:56Z<p>Wirbel: </p>
<hr />
<div>==Description==<br />
'''Author:''' Martin Prochnow, extended by Carsten Siebholz and Andreas Mair<br />
<br />
'''''Ext'''ended '''Rec'''ordings '''Menu''''' is a an extended recording menu for vdr.<br />
<br />
===Status===<br />
Last Update 04/2012<br />
<br />
===Detailled Description===<br />
Extrecmenu has the same functionality as the VDR one, you can choose a recording, show infos and play it and apply commands to a recording.<br />
<br />
With extrecmenu, recordings can be ''renamed'', ''moved'' (including creating subdirs) and move/rename folders. Sorting ascending/descending is individually possible for each folder.<br />
Together with the [[Pin-plugin|PIN-Plugin]] playing and editing recordings can be restricted.<br />
<br />
Also the [[Dvdarchive-patch|DVDArchive-patch]] functions are included, you may archive to DVD (data DVD), but use the standard list of recordings.<br />
==Images==<br />
<gallery><br />
Image:extrecmenu-plugin-00.jpg|''Recordings''<br />
Image:extrecmenu-plugin-01.jpg|''DVD Archive''<br />
Image:extrecmenu-plugin-02.jpg|''Settings''<br />
</gallery><br />
<br />
==Usage==<br />
Intuitive as the standard recordings menu.<br />
<br />
<br />
==Software Requirements==<br />
* [[Dvd-plugin]] (optional, for Video-DVDs in list of recordings)<br />
<br />
==Installation==<br />
If the [[Pin-plugin|PIN-Plugin]] should be used to protect recordings, Makefile Option WITHPINPLUGIN=1 needs to be uncommented.<br />
<br />
To use DVD-Archive Function, the script '''dvdarchive.sh''' needs to copied to '''$PATH'''.<br />
<br />
cd [[Struktur|$SOURCEDIR]]/VDR/PLUGINS/src/extrecmenu<br />
for i in contrib/* ; do gcc $i -o scripts/${i:(-11):9} ; done<br />
find $PWD/scripts -type f -exec ln -fs {} /usr/local/bin \;<br />
<br />
===Patches===<br />
There is a [[Patch]] for VDR in folder '''contrib''' to completely replace the original recordings menu.<br />
<br />
==Current Version==<br />
[http://projects.vdr-developer.org/attachments/download/936/vdr-extrecmenu-1.2.2.tgz 1.2.2]<br />
<br />
==Links==<br />
# [http://projects.vdr-developer.org/projects/show/plg-extrecmenu Plugins Homepage]<br />
# [http://www.constabel.net/vdr/scripts.de.htm Homepage dvdarchive.sh]<br />
<br />
[[Category:Plugins]]<br />
[[Category:Timer-_and_recordings_plugins]]<br />
{{i18n|extrecmenu-plugin}}</div>Wirbelhttps://www.linuxtv.org/vdrwiki/index.php?title=File:Extrecmenu-plugin-02.jpg&diff=6550File:Extrecmenu-plugin-02.jpg2013-12-08T18:21:33Z<p>Wirbel: </p>
<hr />
<div></div>Wirbelhttps://www.linuxtv.org/vdrwiki/index.php?title=File:Extrecmenu-plugin-01.jpg&diff=6549File:Extrecmenu-plugin-01.jpg2013-12-08T18:21:25Z<p>Wirbel: </p>
<hr />
<div></div>Wirbelhttps://www.linuxtv.org/vdrwiki/index.php?title=File:Extrecmenu-plugin-00.jpg&diff=6548File:Extrecmenu-plugin-00.jpg2013-12-08T18:21:17Z<p>Wirbel: </p>
<hr />
<div></div>Wirbelhttps://www.linuxtv.org/vdrwiki/index.php?title=Extrecmenu-plugin&diff=6547Extrecmenu-plugin2013-12-08T18:20:54Z<p>Wirbel: /* Images */</p>
<hr />
<div>==Description==<br />
'''Author:''' Martin Prochnow, extended by Carsten Siebholz and Andreas Mair<br />
<br />
'''''Ext'''ended '''Rec'''ordings '''Menu''''' is a an extended recording menu for vdr.<br />
<br />
===Status===<br />
Last Update 04/2012<br />
<br />
===Detailled Description===<br />
Extrecmenu has the same functionality as the VDR one, you can choose a recording, show infos and play it and apply commands to a recording.<br />
<br />
With extrecmenu, recordings can be ''renamed'', ''moved'' (including creating subdirs) and move/rename folders. Sorting ascending/descending is individually possible for each folder.<br />
Together with the [[Pin-plugin|PIN-Plugin]] playing and editing recordings can be restricted.<br />
<br />
Also the [[Dvdarchive-patch|DVDArchive-patch]] functions are included, you may archive to DVD (data DVD), but use the standard list of recordings.<br />
==Images==<br />
<gallery><br />
Image:extrecmenu-plugin-00.jpg|''Recordings''<br />
Image:extrecmenu-plugin-01.jpg|''DVD Archive''<br />
Image:extrecmenu-plugin-02.jpg|''Settings''<br />
</gallery><br />
<br />
==Usage==<br />
Intuitive as the standard recordings menu.<br />
<br />
<br />
==Software Requirements==<br />
* [[Dvd-plugin]] (optional, for Video-DVDs in list of recordings)<br />
<br />
==Installation==<br />
If the [[Pin-plugin|PIN-Plugin]] should be used to protect recordings, Makefile Option WITHPINPLUGIN=1 needs to be uncommented.<br />
<br />
To use DVD-Archive Function, the script '''dvdarchive.sh''' needs to copied to '''$PATH'''.<br />
<br />
cd [[Struktur|$SOURCEDIR]]/VDR/PLUGINS/src/extrecmenu<br />
for i in contrib/* ; do gcc $i -o scripts/${i:(-11):9} ; done<br />
find $PWD/scripts -type f -exec ln -fs {} /usr/local/bin \;<br />
<br />
===Patches===<br />
There is a [[Patch]] for VDR in folder '''contrib''' to completely replace the original recordings menu.<br />
<br />
==Current Version==<br />
[http://projects.vdr-developer.org/attachments/download/936/vdr-extrecmenu-1.2.2.tgz 1.2.2]<br />
<br />
==Links==<br />
# [http://projects.vdr-developer.org/projects/show/plg-extrecmenu Plugins Homepage]<br />
# [http://www.constabel.net/vdr/scripts.de.htm Homepage dvdarchive.sh]<br />
<br />
[[Category:Plugins]]<br />
[[Category:Timer- and Recordingplugins]]<br />
{{i18n|extrecmenu-plugin}}</div>Wirbelhttps://www.linuxtv.org/vdrwiki/index.php?title=Extrecmenu-plugin&diff=6546Extrecmenu-plugin2013-12-08T18:17:33Z<p>Wirbel: </p>
<hr />
<div>==Description==<br />
'''Author:''' Martin Prochnow, extended by Carsten Siebholz and Andreas Mair<br />
<br />
'''''Ext'''ended '''Rec'''ordings '''Menu''''' is a an extended recording menu for vdr.<br />
<br />
===Status===<br />
Last Update 04/2012<br />
<br />
===Detailled Description===<br />
Extrecmenu has the same functionality as the VDR one, you can choose a recording, show infos and play it and apply commands to a recording.<br />
<br />
With extrecmenu, recordings can be ''renamed'', ''moved'' (including creating subdirs) and move/rename folders. Sorting ascending/descending is individually possible for each folder.<br />
Together with the [[Pin-plugin|PIN-Plugin]] playing and editing recordings can be restricted.<br />
<br />
Also the [[Dvdarchive-patch|DVDArchive-patch]] functions are included, you may archive to DVD (data DVD), but use the standard list of recordings.<br />
==Images==<br />
<gallery><br />
Image:extrecmenu-plugin-00.jpg|''Aufzeichnungen''<br />
Image:extrecmenu-plugin-01.jpg|''DVD Archiv''<br />
Image:extrecmenu-plugin-03.jpg|''Einstellungen''<br />
</gallery><br />
<br />
==Usage==<br />
Intuitive as the standard recordings menu.<br />
<br />
<br />
==Software Requirements==<br />
* [[Dvd-plugin]] (optional, for Video-DVDs in list of recordings)<br />
<br />
==Installation==<br />
If the [[Pin-plugin|PIN-Plugin]] should be used to protect recordings, Makefile Option WITHPINPLUGIN=1 needs to be uncommented.<br />
<br />
To use DVD-Archive Function, the script '''dvdarchive.sh''' needs to copied to '''$PATH'''.<br />
<br />
cd [[Struktur|$SOURCEDIR]]/VDR/PLUGINS/src/extrecmenu<br />
for i in contrib/* ; do gcc $i -o scripts/${i:(-11):9} ; done<br />
find $PWD/scripts -type f -exec ln -fs {} /usr/local/bin \;<br />
<br />
===Patches===<br />
There is a [[Patch]] for VDR in folder '''contrib''' to completely replace the original recordings menu.<br />
<br />
==Current Version==<br />
[http://projects.vdr-developer.org/attachments/download/936/vdr-extrecmenu-1.2.2.tgz 1.2.2]<br />
<br />
==Links==<br />
# [http://projects.vdr-developer.org/projects/show/plg-extrecmenu Plugins Homepage]<br />
# [http://www.constabel.net/vdr/scripts.de.htm Homepage dvdarchive.sh]<br />
<br />
[[Category:Plugins]]<br />
[[Category:Timer- and Recordingplugins]]<br />
{{i18n|extrecmenu-plugin}}</div>Wirbelhttps://www.linuxtv.org/vdrwiki/index.php?title=Externalplayer-plugin&diff=6545Externalplayer-plugin2013-12-08T17:59:33Z<p>Wirbel: </p>
<hr />
<div>==Description==<br />
'''Author:''' Felix Hädicke<br />
<br />
Use external media players in VDR, i.e.:<br />
* [http://dxr3player.sourceforge.net dxr3player]<br />
* [http://mms.sunsite.dk mmsv2]<br />
* [http://oxine.sourceforge.net oxine]<br />
<br />
===Status===<br />
Last Update 04/2013<br />
<br />
==Configuration==<br />
mkdir -p [[Struktur|$VDRCONFIG]]/plugins/externalplayer<br />
cp [[Struktur|$SOURCEDIR]]/VDR/PLUGINS/src/externalplayer/examples/[[externalplayer.conf]] [[Struktur|$VDRCONFIG]]/plugins/externalplayer<br />
<br />
===Parameters===<br />
{| class="wikitable"<br />
|-<br />
!Parameter (short)<br />
!Parameter (long)<br />
!Description<br />
|-<br />
| -C ''<DATEI>'' || --config=''<FILE>'' || Path to config file<br />
|}<br />
<br />
===[[SVDRP]] commands===<br />
The plugin supports the SVDRP interface:<br />
svdrpsend.pl plug externalplayer [command] <br />
<br />
{| class="wikitable"<br />
|-<br />
!Command<br />
!Description<br />
|-<br />
| EXEC <nr> || run entry <nr>. If number is not given, the first entry is started.<br />
|-<br />
| LIST || Lists all entries.<br />
|}<br />
<br />
===Mercurial Repository=== <br />
# [http://hg.uli-eckhardt.de/externalplayer Externalplayer Repository]<br />
<pre>hg clone http://hg.uli-eckhardt.de/externalplayer</pre><br />
<br />
==Current Version==<br />
# [http://www.uli-eckhardt.de/vdr/download/vdr-externalplayer-0.3.2.tgz Version 0.3.2]<br />
<br />
==Links==<br />
# [http://www.uli-eckhardt.de/vdr/external.de.shtml Plugins Homepage]<br />
<br />
[[Category:Plugins]]<br />
[[Category:Mediaplayer-Plugins]]<br />
{{i18n|externalplayer-plugin}}</div>Wirbelhttps://www.linuxtv.org/vdrwiki/index.php?title=File:Exec-plugin-02.jpg&diff=6544File:Exec-plugin-02.jpg2013-12-08T17:54:13Z<p>Wirbel: </p>
<hr />
<div></div>Wirbelhttps://www.linuxtv.org/vdrwiki/index.php?title=File:Exec-plugin-01.jpg&diff=6543File:Exec-plugin-01.jpg2013-12-08T17:54:03Z<p>Wirbel: </p>
<hr />
<div></div>Wirbelhttps://www.linuxtv.org/vdrwiki/index.php?title=File:Exec-plugin-00.jpg&diff=6542File:Exec-plugin-00.jpg2013-12-08T17:53:54Z<p>Wirbel: </p>
<hr />
<div></div>Wirbelhttps://www.linuxtv.org/vdrwiki/index.php?title=Exec-plugin&diff=6541Exec-plugin2013-12-08T17:52:08Z<p>Wirbel: Created page with "==Description== '''Author:''' Winfried Köhler The exec Plugin integrates '''Timer for Actions / Shell commands''' into VDR.<br> Action can be: * a '''shell command''' (1 to 255..."</p>
<hr />
<div>==Description==<br />
'''Author:''' Winfried Köhler<br />
<br />
The exec Plugin integrates '''Timer for Actions / Shell commands''' into VDR.<br><br />
Action can be:<br />
* a '''shell command''' (1 to 255 chars including quoting; colon not allowed.)<br />
* '''shutdown your VDR computer'''<br />
* a '''Warning message''' in OSD<br />
* a '''Info message''' in OSD<br />
"exec timers" can be managed using main menu or remotely by [[SVDRP]]. Each Exec Timer can be programmed as<br />
* '''single shot Timer''' (just executed once an deleted after that automatically)<br />
* '''weekly repeated Timer''' (week days depending on setting: MTWTFSS)<br />
* '''immediately run background Timer''', where "immediately" means started within a minute<br />
<br />
===Status===<br />
Last Update 08/2010<br />
<br />
==Images==<br />
<gallery><br />
Image:Exec-plugin-00.jpg|''Exec Timer Menü'']]<br />
Image:Exec-plugin-01.jpg|''Exec Setup Menü'']]<br />
Image:Exec-plugin-02.jpg|''Editing Timer'']]<br />
</gallery><br />
<br />
==Usage==<br />
===Main Menu===<br />
Exec Timers are reached via Main Menu entry "Exec Timer". You can modify or create/delete timers from there.<br />
<br />
===Plugins Setup Menü===<br />
In the plugins settings you can enable/disable the Main Menü entry "Exec Timer" and toggle SVDRP support.<br />
<br />
===[[SVDRP]] commands===<br />
{{Box Info|If using the [[SVDRP]] interface, you should read the documentation completely!}}<br />
{{Box Warning|'''Every user, who is able to program Exec Timers, may execute commands with the permissions of the VDR process!!'''<br />
<br />
Therefore, the logins or permissions of the vdr process should be restricted. Alternatively SVDRP support may be turned off.}}<br />
<br />
{| class="wikitable"<br />
|- bgcolor=#efefef<br />
!SVDRP Kommando<br />
!Description<br />
|-<br />
| NEWT || create new Exec Timer<br />
|-<br />
| DELT || delete Exec Timer with given index (0 .. N-1)<br />
|-<br />
| RUNT || Run/Trigger Exec Timer with given index (0 .. N-1)<br />
|-<br />
| LSTT || Lists all Exec Timers.<br />
|-<br />
| CLRT || Delete all Exec Timers.<br />
|-<br />
| NACT || List next active Exec Timer.<br />
|-<br />
| NWUT || List next wakeup Exec Timer.<br />
|}<br />
<br />
''example:''<br />
<pre><br />
bash-3.00# svdrpsend.pl plug exec LSTT<br />
220 TopLap SVDRP VideoDiskRecorder 1.5.10; Sun Oct 14 16:32:14 2007<br />
250 -----S-:1500:0:1:1:0:0:update_dvb_driver.sh<br />
250 -----S-:1520:0:1:1:0:0:vdrGetWeeklyUpdate.sh<br />
250 2007-12-24:1730:0:1:1:0:0:play Chrismas_Song<br />
221 TopLap closing connection<br />
</pre><br />
<br />
==Current Version==<br />
[http://wirbel.htpc-forum.de/old_stuff/vdr-exec-0.0.3.tgz 0.0.3]<br />
<br />
==Links==<br />
[http://wirbel.htpc-forum.de/old_stuff/index2.html Plugins Homepage]<br />
<br />
[[Category:Plugins]]<br />
[[Category:Admin-Plugins]]<br />
{{i18n|exec-plugin}}</div>Wirbelhttps://www.linuxtv.org/vdrwiki/index.php?title=Epgsync-plugin&diff=6540Epgsync-plugin2013-12-08T17:29:15Z<p>Wirbel: </p>
<hr />
<div>==Description==<br />
'''Author:''' Frank Schmirler<br />
<br />
Imports the [[EPG]] of another VDR using the Svdrp protocol. For connecting the svdrpservice-plugin is used which has to be installed along with epgsync.<br />
The actual import runs as background thread. The thread can be started from main menu and/or automatically whenever the plugin is started. <br />
<br />
===Status===<br />
Last Update 06/2013<br />
<br />
==Software Requirements==<br />
* [[svdrpservice-plugin]] >= 0.0.2<br />
<br />
==Current Version(en)==<br />
[http://vdr.schmirler.de/svdrpservice/vdr-svdrpservice-1.0.0.tgz 1.0.0]<br />
<br />
==Links==<br />
# [http://vdr.schmirler.de Plugins Homepage]<br />
<br />
[[Category:Plugins]]<br />
[[Category:EPG_and_Co]]<br />
[[Category:Svdrp-tools]]<br />
<br />
{{i18n|epgsync-plugin}}</div>Wirbelhttps://www.linuxtv.org/vdrwiki/index.php?title=UBUNTU/Installation&diff=6539UBUNTU/Installation2013-12-07T18:52:50Z<p>Wirbel: </p>
<hr />
<div>= Install and Configure VDR on Ubuntu (outdated!) =<br />
This article contains tips and advice for setting up VDR and plugins on Ubuntu. <br />
{{Box Info |<br />
Ubuntu releases are based on snapshots of Debian Unstable so you can mostly refer to the [[:Category:Debian|Debian documentation]].<br />
}}<br />
== Installing from Binary Packages ==<br />
VDR has been available in the Ubuntu Universe repository since Warty. <br />
* [http://packages.ubuntu.com/vdr Ubuntu Packages]<br />
This article assumes that you have installed Ubuntu Dapper and have installed and confirmed to be working a Linux compatible DVB device.<br />
<br />
Before you can install VDR packages, you must first [http://help.ubuntu.com/community/Repositories add the Universe repository to your Apt sources list]. Now you can use Aptitude or Synaptic to search for available vdr packages. <br />
* See [[DEBIAN_VDR_Packages]] for further information.<br />
<br />
== Installing from Debian Package Sources ==<br />
* You will need to install '''svn-buildpackage''', which lives in the Ubuntu Universe repository, so if you haven't already done so, add Universe to your sources.list<br />
* Continue to [[DEBIAN_Compiling_VDR_Source_Packages]]<br />
<br />
== Configuring VDR and plugins ==<br />
* See [[DEBIAN_Configuring_VDR]]<br />
<br />
== Installing VDR from e-tobi.net source packages == <br />
* updated 5/2007 (VA, Finland)<br />
* Jul 29. 2007 - updated the deb-src line (NM, Finland)<br />
<br />
IMPORTANT INFO BEFORE INSTALLATION!!<br />
* this is only recommended if Ubuntu supplied packages are not enough, for example you need extra plugins<br />
* make sure your DVB card works before doing this (I used kaffeine player for testing)<br />
* tested on Ubuntu Edgy/Feisty, recommended only for advanced users!!<br />
* this example includes subtitles patch (needed for DVB subtitles at least in some European countries)<br />
* this process must be done again after dist-upgrades<br />
<br />
VDR<br />
1. Remove all installed Ubuntu VDR packages.<br />
$ sudo apt-get remove vdr vdr-dev<br />
* NOTE this does not remove configuration files, consider using Synaptic complete removal<br />
<br />
2. Add the following to /etc/apt/sources.list.<br />
deb-src http://e-tobi.net/vdr-experimental lenny base addons vdr-multipatch<br />
<br />
3. Update packagelist and install compile tools.<br />
$ sudo apt-get update<br />
$ sudo apt-get install dpkg-dev build-essential fakeroot<br />
<br />
3. Make a directory for source code files.<br />
$ cd ~<br />
$ mkdir vdr-src<br />
$ cd vdr-src<br />
<br />
4. Install VDR sourcecode.<br />
$ apt-get source vdr<br />
<br />
5. Try to get depencies automatically.<br />
$ sudo apt-get build-dep vdr<br />
<br />
6. Make sure you have some needed packages.<br />
$ sudo apt-get install debhelper linux-headers-generic libjpeg62-dev dpatch libcap-dev libncurses5-dev<br />
<br />
7. Activate subtitles patch by editing file vdr-1.4.*/debian/patches/00list.<br />
Do this only if you need DVB subtitles. Remove comments from the following lines.<br />
opt-27_subtitles-ttxtsubs<br />
opt-27-x_subtitles-ttxtsubs-volumebar-fix<br />
<br />
You can also activate other patches, but be careful as they might conflict each other.<br />
<br />
8. Compile VDR and create deb packages.<br />
<br />
$ cd ~/vdr-src/vdr-1.4.*<br><br />
$ fakeroot debian/rules binary<br />
<br />
After this there should be vdr_1.4.*.deb and vdr-dev_1.4.*.deb packages in ~/vdr-src.<br />
<br />
9. Install deb packages.<br />
<br />
$ cd ~/vdr-src<br><br />
$ sudo dpkg -i vdr_1.4*.deb vdr-dev_1.4*.deb<br />
$ sudo /etc/init.d/vdr stop <br />
(stop vdr, plugins need to be activated)<br />
<br />
DONE! Continue to install plugins below.<br />
<br />
PLUGINS<br />
<br />
Browse e-tobi.net selection at http://www.e-tobi.net/repositories/repositories.html<br />
Below are a couple of examples to install them.<br />
<br />
vdr-plugin-subtitles<br />
<br />
$ cd ~/vdr-src<br />
$ apt-get source vdr-plugin-subtitles<br />
$ sudo apt-get build-dep vdr-plugin-subtitles<br />
$ cd vdr-plugin-subtitles-*<br />
$ fakeroot debian/rules binary<br />
$ cd ..<br />
$ sudo dpkg -i vdr-plugin-subtitles_*.deb<br />
<br />
vdr-plugin-xineliboutput<br />
<br />
$ apt-get source vdr-plugin-xineliboutput<br />
$ sudo apt-get build-dep vdr-plugin-xineliboutput<br />
$ cd vdr-plugin-xineliboutput-*<br />
$ fakeroot debian/rules binary<br />
$ cd ..<br />
$ sudo dpkg -i vdr-plugin-xineliboutput_*.deb libxine-xvdr_*.deb libxineliboutput-sxfe_*.deb xineliboutput-sxfe_*.deb<br />
<br />
MORE PLUGINS<br />
<br />
Below are listed a couple of useful plugins. Install the same way as above. <br />
It can be wise to install these after you are sure vdr is working.<br />
vdr-plugin-remote (remote control support)<br />
vdr-plugin-osdteletext (used at least in europe)<br />
vdradmin-am (control vdr via web)<br />
<br />
USEFUL TIPS<br />
<br />
Starting VDR (started automatically during deb installation)<br />
$ sudo /etc/init.d/vdr start<br />
<br />
Config files (if you make changes, remember to restart VDR)<br />
<br />
/etc/default/vdr<br />
# Enable VDR<br />
ENABLED=1<br />
# change default path to save recordings<br />
VIDEO_DIR="/path/to/videodir" <br />
# use this only to configure remote control keys via sxfe, comment out for normal use<br />
# USER=your_username_which_is_running_X_session<br />
<br />
/etc/vdr/plugins/plugin.xineliboutput.conf<br />
--local=none # disable sxfe access, consider enabling if you have a dedicated VDR box<br />
--remote=37890 # add network support in order to access it via xine player<br />
--primary<br />
NOTE, first time starting VDR use --local=sxfe --remote=none to configure remote control keys.<br />
Remember to use correct USER above (normally VDR is run as "vdr" user which does not have access to your X session)<br />
Otherwise xine xvdr access does not seem to work because it's waiting for remote control configuration.<br />
Also temporarily "chmod 777 /var/lib/vdr" so that remote.conf can be written.<br />
<br />
/var/lib/vdr/channels.conf<br />
This is a required file with channel frequency info in your area.<br />
See http://www.linuxtv.org/vdrwiki/index.php/Syntax_of_channels.conf for more info.<br />
<br />
DONE!!<br />
<br />
You should be able to access VDR via xine-ui (select XVDR). See xineliboutput for more frontends.<br />
If you have later problems to use xine-ui, try the sxfe option (mentioned earlier) to debug.<br />
<br />
<br />
<!-- [[Category:Ubuntu]] --><br />
[[Category:CandidateForDeletion]]</div>Wirbelhttps://www.linuxtv.org/vdrwiki/index.php?title=Installscript&diff=6538Installscript2013-12-07T17:30:26Z<p>Wirbel: /* Links */</p>
<hr />
<div>==Description==<br />
The '''Installsscript''' is a tool that the handles the conventional installation steps with a collection of scripts.<br />
<br />
[[Image:installscript-0.png|thumb|none|''lxdialog'']]<br />
<br />
==Prerequirements==<br />
* Development environment<br />
<br />
check needed requirements by this command:<br />
<br />
bash> sh vdr-install-script-current.run -- --checkreq<br />
<br />
On sarge it needs libncurses5-dev and others obvious (if you typed in previous command) packages.<br />
<br />
==Tutorial==<br />
===First of all===<br />
* Linux knowledge is required<br />
* It is useful to have experiences in compiling [[VDR]] and it's component manually<br />
<br />
===Scripts customisation===<br />
<br />
Unpack<br />
<br />
bash> sh vdr-install-script-current.run --noexec --target /tmp/vdr<br />
bash> cd /tmp/vdr/setup<br />
<br />
The following files should be adapted according to your needs.<br />
<br />
+-- [[Image:Folder.png]] $DISDIR<br />
+-- [[Image:Folder.png]] setup<br />
+-- [[Image:Folder.png]] config<br />
|--+ [[installscript-setup.conf|'''setup.conf''']]<br />
|--+ [[installscript-make.conf|'''make.conf''']]<br />
|--+ [[installscript-modules.conf|'''modules.conf''']]<br />
|--+ [[installscript-sources.conf|'''sources.conf''']]<br />
|--+ [[installscript-marks2pts.conf|'''marks2pts.conf''']]<br />
|--+ [[installscript-keymacros.conf|'''keymacros.conf''']]<br />
+-- [[Image:Folder.png]] examples<br />
+-- [[Image:Folder.png]] plugins<br />
+-- [[Image:Folder.png]] mailbox<br />
|--+ '''[[accounts.conf]]'''<br />
+-- [[Image:Folder.png]] vdr<br />
|--+ [[installscript-vdr.conf|'''vdr.conf''']]<br />
<br />
===CMD(s)===<br />
<br />
+-- [[Image:Folder.png]] $DISDIR<br />
+-- [[Image:Folder.png]] admin<br />
+-- [[Image:Folder.png]] [[installscript-command-cmds|'''command-cmds''']]<br />
|--+ *.conf<br />
+-- [[Image:Folder.png]] [[installscript-plugin-cmds|'''plugin-cmds''']]<br />
|--+ *.conf<br />
+-- [[Image:Folder.png]] [[installscript-recording-cmds|'''recording-cmds''']]<br />
|--+ *.run<br />
+-- [[Image:Folder.png]] [[installscript-shutdown-cmds|'''shutdown-cmds''']]<br />
|--+ *.run<br />
+-- [[Image:Folder.png]] [[installscript-start-cmds|'''start-cmds''']]<br />
|--+ [[Image:Folder.png]] rc<br />
|--+ [[Image:Folder.png]] rc.d<br />
|--+ [...]<br />
<br />
===Structur===<br />
<br />
+-- [[Image:Folder.png]] /usr/local ("'''$INSTALLPREFIX'''")<br />
+-- [[Image:Folder.png]] src<br />
+-- [[Image:Folder.png]] VDR<br />
+-- [[Image:Folder.png]] DVB<br />
+-- [[Image:Folder.png]] stow<br />
+-- [[Image:Folder.png]] package<br />
+-- [[Image:Folder.png]] bin<br />
+-- [[Image:Folder.png]] lib<br />
+-- [[Image:Folder.png]] doc<br />
+-- [[Image:Folder.png]] cache<br />
+-- [[Image:Folder.png]] cddb<br />
+-- [[Image:Folder.png]] gameboy<br />
+-- [[Image:Folder.png]] infosatepg<br />
+-- [[Image:Folder.png]] mp3<br />
+-- [[Image:Folder.png]] podcatcher<br />
+-- [[Image:Folder.png]] mldonkey<br />
+-- [[Image:Folder.png]] tvmovie2vdr<br />
+-- [[Image:Folder.png]] epgimages<br />
+-- [[Image:Folder.png]] downloadfiles<br />
+-- [[Image:Folder.png]] downloadupdatefiles<br />
+-- [[Image:Folder.png]] vtx<br />
+-- [[Image:Folder.png]] etc<br />
+-- [[Image:Folder.png]] graphlcd<br />
|--+ graphlcd.conf<br />
+-- [[Image:Folder.png]] igor<br />
|--+ igor.conf<br />
+-- [[Image:Folder.png]] lcdproc<br />
|--+ LCDd.conf<br />
+-- [[Image:Folder.png]] lirc<br />
|--+ lircd.conf<br />
|--+ lircrc<br />
+-- [[Image:Folder.png]] nvram-wakeup<br />
|--+ nvram-wakeup.conf<br />
+-- [[Image:Folder.png]] sharemarks<br />
|--+ marks2pts.conf<br />
+-- [[Image:Folder.png]] tvmovie2vdr<br />
|--+ channels.pl<br />
|--+ channels_wanted.pl<br />
|--+ config.pl<br />
+-- [[Image:Folder.png]] vdr ("'''$DISDIR'''")<br />
|--+ setup.conf<br />
+-- [[Image:Folder.png]] vdradmin<br />
|--+ vdradmind.{at,bl,conf,done}<br />
<br />
===Module===<br />
====Add====<br />
<pre><br />
bash> ./vdr-install-script-<VERSION>.run -- --plgadd<br />
bash> ./setup.sh --plgadd<br />
</pre><br />
<br />
====Import====<br />
<pre><br />
bash> ./vdr-install-script-<VERSION>.run -- --add="<URL>/<MODUL>"<br />
bash> ./setup.sh --add="<URL>/<MODUL>"<br />
</pre><br />
<br />
====Remove====<br />
<pre><br />
bash> ./setup.sh --plgrm<br />
</pre><br />
<br />
====Extend====<br />
<pre><br />
bash> sh setup.sh --ostype<br />
==> real_os_type="Redhat Linux Desktop"<br />
==> real_os_version="10.0"<br />
</pre><br />
<br />
Modules extend.<br />
<br />
<pre><br />
CallDepend() {<br />
case $real_os_type in<br />
"Arch Linux")<br />
if ! pacman -Q libcap libjpeg ; then<br />
pacman -S libcap libjpeg<br />
fi<br />
;;<br />
"Crux Linux")<br />
if ! prt-get isinst libcap libjpeg ; then<br />
prt-get depinst libcap libjpeg<br />
fi<br />
;;<br />
"Debian Linux") apt-get install libjpeg62-dev libcap-dev ;;<br />
"Gentoo Linux") emerge jpeg libcap -n ;;<br />
"SuSE Linux")<br />
case $real_os_version in<br />
7.3|8.0|8.1|8.2|9.0|9.1)<br />
if ! rpm -q libjpeg libcap ; then<br />
yast -i libjpeg libcap<br />
fi<br />
;;<br />
*)<br />
if ! rpm -q libjpeg libjpeg-devel libcap ; then<br />
yast -i libjpeg libjpeg-devel libcap<br />
fi<br />
;;<br />
esac<br />
;;<br />
+ "Redhat Linux Desktop")<br />
+ if ! <TEST(S)> ; then<br />
+ <INSTALLATIONS-COMMAND(S)> <PAKAGES><br />
+ fi<br />
+ ;;<br />
esac<br />
}<br />
</pre><br />
<br />
==Links==<br />
{|<br />
| [1]<br />
| ftp://ftp.tvdr.de/vdr/Tools<br />
| VDR FTP<br />
|-<br />
| [2]<br />
| http://linvdr.org/download/vdr/Tools<br />
| Download mirror<br />
|-<br />
| [3]<br />
| http://savannah.gnu.org/projects/stow<br />
| GNU Stow project homepage<br />
|-<br />
| [4]<br />
| http://www.inf.tu-dresden.de/~al10/stowES<br />
| Extensions to Stow<br />
|-<br />
| [5]<br />
| http://linuxwiki.de/Stow<br />
| Stow Wiki<br />
|}<br />
<br />
<!-- [[Category:Installscript]] --><br />
{{i18n|Installscript}}</div>Wirbelhttps://www.linuxtv.org/vdrwiki/index.php?title=Category:XML-Skins&diff=6537Category:XML-Skins2013-12-03T15:47:06Z<p>Wirbel: Created page with "The Text2skin-plugin allows changing VDRs On-Screen-Display with XML-based Skins. The List of Text2skin XML Skins is here. de:Kategorie:XML-Skins"</p>
<hr />
<div>The [[Text2skin-plugin]] allows changing VDRs On-Screen-Display with XML-based Skins.<br />
<br />
The List of Text2skin XML Skins is [[Text2skin_XML-Skins|here]].<br />
[[de:Kategorie:XML-Skins]]</div>Wirbelhttps://www.linuxtv.org/vdrwiki/index.php?title=Text2skin_XML-Skins&diff=6535Text2skin XML-Skins2013-12-03T15:39:50Z<p>Wirbel: </p>
<hr />
<div>==List of XML based text2skin Skins==<br />
<br />
{|width="80%" class="wikitable"<br />
!Name<br />
!Homepage<br />
!Download<br />
|-<br />
| AnthraHD<br />
| [http://www.vdr-portal.de/board17-developer/board21-vdr-plugins/94370-anthra-alle-aufl%C3%B6sungen-und-black-and-blue-full-hd-und-hd-ready-f%C3%BCr-text2skin/ vdr-portal thread]<br />
| -<br />
|-<br />
| DeepBlue<br />
| ???<br />
| [http://vdr.bluox.org/download/Skins/DeepBlue-0.1.1a.tar.gz 0.1.1a]<br />
|-<br />
| EgalsTry<br />
| http://www.egal-vdr.de/skins<br />
| [http://www.egal-vdr.de/skins/Skin-EgalsTry-1.1.0.tgz 1.1.0]<br />
|-<br />
| EgalsTry T2<br />
| http://www.egal-vdr.de/skins<br />
| [http://www.egal-vdr.de/skins/vdr-text2skin-EgalT2-0.3.3.tar.gz 0.3.3]<br />
|-<br />
| enElchi<br />
| ???<br />
| [http://vdr.bluox.org/download/Skins/vdrskin-enElchi-0.3.0.tgz 0.3.0]<br />
|-<br />
| enigma<br />
| ???<br />
| [http://vdr.bluox.org/download/Skins/vdrskin-enigma-0.3.tar.bz2 0.3]<br />
|-<br />
| izegrey16<br />
| http://skins.vdr-developer.org/text2skin<br />
| [http://skins.vdr-developer.org/text2skin/files/izegrey16-1.0-20050304.tar.gz 1.0]<br />
|-<br />
| lightblue16<br />
| http://skins.vdr-developer.org/text2skin<br />
| |http://skins.vdr-developer.org/text2skin/files/lightblue16-CVS-20051015.tar.gz cvs]<br />
|-<br />
| lightblue256<br />
| http://skins.vdr-developer.org/text2skin<br />
| [http://skins.vdr-developer.org/text2skin/files/lightblue256-CVS-20051015.tar.gz cvs]<br />
|-<br />
| Motz<br />
| http://www.motz.it/listing/vdr/<br />
| [http://www.motz.it/listing/vdr/Motz.tgz latest]<br />
|-<br />
| NarrowHD<br />
| http://projects.vdr-developer.org/projects/skin-narrowhd<br />
| -<br />
|-<br />
| PearlHD<br />
| http://projects.vdr-developer.org/projects/skin-pearlhd<br />
| -<br />
|-<br />
| SilverGreen<br />
| http://home.arcor.de/bjoern.sturzrehm/vdr/index.html<br />
| [http://home.arcor.de/bjoern.sturzrehm/vdr/SilverGreen-0.1.7.tar.bz2 0.1.7]<br />
|-<br />
|}<br />
<br />
[[Category:XML-Skins]]<br />
{{i18n|Text2skin XML-Skins}}</div>Wirbelhttps://www.linuxtv.org/vdrwiki/index.php?title=Text2skin_XML-Skins&diff=6534Text2skin XML-Skins2013-12-03T15:39:18Z<p>Wirbel: Created page with "==List of XML based text2skin Skins== {|width="80%" class="wikitable" !Name !Homepage !Download |- | AnthraHD | [http://www.vdr-portal.de/board17-developer/board21-vdr-plugins/9..."</p>
<hr />
<div>==List of XML based text2skin Skins==<br />
<br />
{|width="80%" class="wikitable"<br />
!Name<br />
!Homepage<br />
!Download<br />
|-<br />
| AnthraHD<br />
| [http://www.vdr-portal.de/board17-developer/board21-vdr-plugins/94370-anthra-alle-aufl%C3%B6sungen-und-black-and-blue-full-hd-und-hd-ready-f%C3%BCr-text2skin/ vdr-portal thread]<br />
| -<br />
|-<br />
| DeepBlue<br />
| ???<br />
| [http://vdr.bluox.org/download/Skins/DeepBlue-0.1.1a.tar.gz 0.1.1a]<br />
|-<br />
| EgalsTry<br />
| http://www.egal-vdr.de/skins<br />
| [http://www.egal-vdr.de/skins/Skin-EgalsTry-1.1.0.tgz 1.1.0]<br />
|-<br />
| EgalsTry T2<br />
| http://www.egal-vdr.de/skins<br />
| [http://www.egal-vdr.de/skins/vdr-text2skin-EgalT2-0.3.3.tar.gz 0.3.3]<br />
|-<br />
| enElchi<br />
| ???<br />
| [http://vdr.bluox.org/download/Skins/vdrskin-enElchi-0.3.0.tgz 0.3.0]<br />
|-<br />
| enigma<br />
| ???<br />
| [http://vdr.bluox.org/download/Skins/vdrskin-enigma-0.3.tar.bz2 0.3]<br />
|-<br />
| izegrey16<br />
| http://skins.vdr-developer.org/text2skin<br />
| [http://skins.vdr-developer.org/text2skin/files/izegrey16-1.0-20050304.tar.gz 1.0]<br />
|-<br />
| lightblue16<br />
| http://skins.vdr-developer.org/text2skin<br />
| |http://skins.vdr-developer.org/text2skin/files/lightblue16-CVS-20051015.tar.gz cvs]<br />
|-<br />
| lightblue256<br />
| http://skins.vdr-developer.org/text2skin<br />
| [http://skins.vdr-developer.org/text2skin/files/lightblue256-CVS-20051015.tar.gz cvs]<br />
|-<br />
| Motz<br />
| http://www.motz.it/listing/vdr/<br />
| [http://www.motz.it/listing/vdr/Motz.tgz latest]<br />
|-<br />
| NarrowHD<br />
| http://projects.vdr-developer.org/projects/skin-narrowhd<br />
| -<br />
|-<br />
| PearlHD<br />
| http://projects.vdr-developer.org/projects/skin-pearlhd<br />
| -<br />
|-<br />
| SilverGreen<br />
| http://home.arcor.de/bjoern.sturzrehm/vdr/index.html<br />
| [http://home.arcor.de/bjoern.sturzrehm/vdr/SilverGreen-0.1.7.tar.bz2 0.1.7]<br />
|-<br />
|}<br />
<br />
[[Category:XML-Skins]]</div>Wirbelhttps://www.linuxtv.org/vdrwiki/index.php?title=Category:Skin-Plugins&diff=6533Category:Skin-Plugins2013-12-03T15:34:30Z<p>Wirbel: Created page with "VDR supports an skinnable OSD. There are two kinds of Skins: * Skins as separate plugins, found in this category and.. * [[Text2skin_XML-Skins|XML based Skins for the text2sk..."</p>
<hr />
<div>VDR supports an skinnable [[OSD]].<br />
There are two kinds of Skins:<br />
* Skins as separate plugins, found in this category and..<br />
* [[Text2skin_XML-Skins|XML based Skins for the text2skin-plugin]]<br />
<br />
[[Category:Plugins]]<br />
[[de:Kategorie:Skin-Plugins]]</div>Wirbelhttps://www.linuxtv.org/vdrwiki/index.php?title=Category:Game-Plugins&diff=6532Category:Game-Plugins2013-12-03T15:31:05Z<p>Wirbel: Created page with "VDR Plugins for Gaming. Category:Plugins de:Kategorie:Spiele-Plugins"</p>
<hr />
<div>VDR Plugins for Gaming.<br />
<br />
<br />
[[Category:Plugins]]<br />
[[de:Kategorie:Spiele-Plugins]]</div>Wirbelhttps://www.linuxtv.org/vdrwiki/index.php?title=Plugins_by_topic&diff=6531Plugins by topic2013-12-03T15:27:48Z<p>Wirbel: /* Timers & Recordings */</p>
<hr />
<div>==Plugins by Topic==<br />
=== Audio and Video ===<br />
{| width=100% class="wikitable" style="background-color:#ffffdd"<br />
|-<br />
! Plugin Category<br />
! Description<br />
|-<br />
| colspan="2" style="background-color:#efefef" |<br />
==== Audio and Video Receiving ====<br />
|-<br />
| [[:Category:Input-Plugins]]<br />
| Using Audio and Video in VDR:<br />
* analogue TV<br />
* IPTV<br />
* [[:Category:Streaming|Streaming]] from other VDRs<br />
* [[:Category:Radio|Radio]]<br />
|-<br />
| colspan="2" style="background-color:#efefef" |<br />
<br />
==== Displaying Audio and Video ====<br />
|-<br />
| [[:Category:Output-Plugins]]<br />
| Output of Audio and Video:<br />
* via graphics card<br />
* [[:Category:Streaming|Streaming]] to clients in a network <br />
* via special hardware<br />
* other possibilities of Outputting Audio and Video via Plugin<br />
|-<br />
| colspan="2" style="background-color:#efefef" |<br />
<br />
==== Audio & Video Tools ====<br />
|-<br />
| [[:Category:Audio and Video Tools]]<br />
| Accessories to Audio and Video<br />
* Displaying informationens like Bitrate, Resolution, Audio Tracks<br />
* ID3 Tags<br />
* Changing Size and Position of Video window<br />
* control sound card mixer<br />
* Screenshots<br />
|}<br />
<br />
=== HTPC Accessories ===<br />
{| width=100% class="wikitable" style="background-color:#C0FFFF"<br />
|-<br />
! Plugin Category<br />
! Description<br />
|-<br />
| colspan="2" style="background-color:#efefef" |<br />
<br />
==== Atmolight & Co. ====<br />
|-<br />
| [[:Category:Atmo-Light]]<br />
| TV Backlight, similar to Philips Atmolight<br />
* Atmolight<br />
* Seduatmo<br />
* SolarStorm<br />
|-<br />
| colspan="2" style="background-color:#efefef" |<br />
<br />
==== Remote Control & IR Senders ====<br />
|-<br />
| [[:Category:RemoteControl]]<br />
| Using<br />
* IR remote controllers<br />
* radio remote controllers<br />
* Bluetooth remote controllers<br />
* Android Phones/Pads as remote controller<br />
* Plugins for remote control via Telnet/SSH/..<br />
* Joysticks<br />
* Griffin Powermate<br />
|-<br />
| colspan="2" style="background-color:#efefef" |<br />
<br />
==== Additional Displays ====<br />
|-<br />
| [[:Category:External_Display]]<br />
| control Displays<br />
* TFTs<br />
* Text displays like VFT or text LCD<br />
* Touchscreens<br />
|-<br />
| colspan="2" style="background-color:#efefef" |<br />
|}<br />
<br />
=== VDR-Accessories ===<br />
{| width=100% class="wikitable" style="background-color:#D0FAD0"<br />
|-<br />
! Plugin Category<br />
! Description<br />
|-<br />
| colspan="2" style="background-color:#efefef" |<br />
<br />
==== EPG & Teletext ====<br />
|-<br />
| [[:Category:EPG_and_Co]]<br />
| Plugins related to the Electronic Program Guide([[EPG]])<br />
* Import of EPG Data<br />
* extended Program Guides/Views<br />
* create automatic Timers<br />
* Searches in Program Guides<br />
|-<br />
| colspan="2" style="background-color:#efefef" |<br />
<br />
==== Media Players ====<br />
|-<br />
| [[:Category:Mediaplayer-Plugins]]<br />
| Play local Media:<br />
* CDs<br />
* DVDs<br />
* Audio files<br />
* Video files<br />
* ISO Images<br />
|-<br />
| colspan="2" style="background-color:#efefef" |<br />
<br />
==== PayTV ====<br />
|-<br />
| [[:Category:PayTV]]<br />
| All Plugins related to PayTV.<br />
* additional Sky channels<br />
* using your Abo card<br />
|-<br />
| colspan="2" style="background-color:#efefef" |<br />
<br />
==== Skin support for VDR ====<br />
|-<br />
|<br />
[[:Category:Skin-Plugins]]<br><br />
[[:Category:XML-Skins]]<br />
| Modify VDR GUI<br />
* with Plugins<br />
* with XML based Skins, displayed from [[Text2skin-plugin]]<br />
|-<br />
| colspan="2" style="background-color:#efefef" |<br />
<br />
==== Games ====<br />
|-<br />
| [[:Category:Game-Plugins]]<br />
| Spiele für den VDR<br />
* Gameboy Emulator<br />
* Hattrik<br />
* Tetris<br />
* Soccer Results<br />
|-<br />
| colspan="2" style="background-color:#efefef" |<br />
<br />
==== Timers & Recordings ====<br />
|-<br />
| [[:Category:Timer- and recordings plugins]]<br />
| All Timer and Recording plugins<br />
* Timer Overlappings<br />
* Timer management<br />
* Automatic creation of Timers<br />
* Create Timers from different devices and from remote<br />
* Recovering deleted recordings<br />
|-<br />
| colspan="2" style="background-color:#efefef" |<br />
<br />
==== Transcoding and Archiving of Media ====<br />
|-<br />
| [[:Category:Transcoding and Burn Plugins]]<br />
|<br />
* Transcoding Media files<br />
* generate CDs, DVDs and similar<br />
|-<br />
| colspan="2" style="background-color:#efefef" |<br />
|}<br />
<br />
=== Administration ===<br />
{| width=100% class="wikitable" style="background-color:#FFFFDB"<br />
|-<br />
! Plugin Category<br />
! Description<br />
|-<br />
| colspan="2" style="background-color:#efefef" |<br />
<br />
==== Plugins for System Administration ====<br />
|-<br />
| [[:Category:Admin-Plugins]]<br />
| System Administration:<br />
* admistrate other Plugins<br />
* monitor CPU, RAM usage, Disk usage und temperatures<br />
* Interaction with shell scripts, tools and daemons<br />
* [[:Category:Childlock|Childlock]] for VDR<br />
|-<br />
| colspan="2" style="background-color:#efefef" |<br />
<br />
==== Channel Lists, TV channels scanning & TV reception status ====<br />
|-<br />
| [[:Category:Channelscanner and ReceivingStatus]]<br />
| channel list management for analogue and digital TV:<br />
* searching channels<br />
* manage channel lists<br />
* check function and signal of TV-cards<br />
|-<br />
| colspan="2" style="background-color:#efefef" |<br />
|}<br />
<br />
=== UNSORTED ===<br />
{| width=100% class="wikitable"<br />
|-<br />
! Plugin<br />
! Description<br />
|-<br />
| colspan="2" style="background-color:#efefef" |<br />
<br />
|-<br />
| {{plugin|ttxtsubs|lightgrey}}<br />
| {{wikipedia|Teletext}}-Viewer<br />
|-<br />
| {{plugin|sleeptimer|lime}}<br />
| "countdown"-counter for shutdown VDR or exec commands<br />
|-<br />
| {{plugin|mlist|lime}}<br />
| History of [[OSD]]-messages<br />
|-<br />
| {{plugin|uactivity|lime}}<br />
| exec Shell scripts on change of user activity<br />
|-<br />
| {{plugin|cpumon|lime}}<br />
| CPU monitor<br />
|-<br />
| {{plugin|screenshot|lime}}<br />
| make Screenshots<br />
|-<br />
| {{plugin|fritzbox|lime}}<br />
| incoming call monitor<br />
|-<br />
| {{plugin|rssreader|lime}}<br />
| {{wikipedia|RSS}}-reader<br />
|-<br />
| {{plugin|mailbox|lime}}<br />
| simple email client<br />
|-<br />
| {{plugin|lcr|lime}}<br />
| telephone least cost routing<br />
|-<br />
| {{plugin|mldkgui|yellow}}<br />
| {{wikipedia|MLDonkey}}-Plugin<br />
|-<br />
| {{plugin|eggtimer|lime}}<br />
| an egg timer<br />
|-<br />
| {{plugin|vompserver|lime}}<br />
| controls [[Hauppauge]] [[MediaMVP]] and/or Windows Clients<br />
|-<br />
| {{plugin|kvdrmon|lime}}<br />
| support plugin for kvdrmon, an {{wikipedia|KDE}} Kicker-Applet<br />
|-<br />
| {{plugin|live|lime}}<br />
| Live - Live Interactive VDR Environment<br />
|-<br />
| {{plugin|osdserver|lime}}<br />
| VDR OSD-access for cli via TCP/IP<br />
|-<br />
<br />
|}<br />
<br />
==See also==<br />
<br />
# [[Plugins]] sorted Alphabetically (A..Z)<br />
<br />
[[Category:Plugins]]</div>Wirbelhttps://www.linuxtv.org/vdrwiki/index.php?title=Category:Timer-_and_recordings_plugins&diff=6530Category:Timer- and recordings plugins2013-12-03T15:06:30Z<p>Wirbel: Created page with "Related to Timer and Recordings * View Timer Collisions (overlappings) * Timer Management * Automatic creation of timers * Create timers on other devices and from net * restore d..."</p>
<hr />
<div>Related to Timer and Recordings<br />
* View Timer Collisions (overlappings)<br />
* Timer Management<br />
* Automatic creation of timers<br />
* Create timers on other devices and from net<br />
* restore deleted recordings<br />
<br />
[[Category:Plugins]]<br />
[[de:Kategorie:Timer- und Aufnahmeplugins]]</div>Wirbelhttps://www.linuxtv.org/vdrwiki/index.php?title=Epgsearch-plugin&diff=6529Epgsearch-plugin2013-12-03T15:02:05Z<p>Wirbel: /* Description */</p>
<hr />
<div>==Description==<br />
<br />
'''Author:''' Christian Wieninger<br />
<br />
'''EPG Search''' can be used a replacement [[EPG]] view. It extends the standard EPG view (ie. search for rebroadcasts), a command menu for epg events and a search function for EPG. The search may create automatically timers.<br />
<br />
This 'search timers', search for broadcasts in the background and add a timer if one matches (similar to VDRAdmin's auto-timers) or simply announce it via OSD. Once you have created your searches, any programme(s) matching your criteria (Programme title/description; start/end time; channel etc.), it will be recorded. So you can record every episode of a series automatically.<br />
<br />
A timer-conflict-check checks in the background for overlapping timers and if one cannot be record it informs the user via OSD. The conflict can then be resolved with an easy to handle OSD menu.<br />
<br />
Epgsearch can inform you with an email at timer-updates and/or at timer-conflicts and you can use user defined variables for use in searchtimers and for calling external scripts to influence timer creation.<br />
<br />
===Status===<br />
<br />
Last Update 09/2011<br />
<br />
==Images==<br />
<gallery><br />
Image:epgsearch-plugin-00.jpg|''Overview - Now''<br />
Image:epgsearch-plugin-01.png|''Overview - Now''<br />
Image:epgsearch-plugin-02.jpg|''example notification email''<br />
</gallery><br />
<br />
==Usage==<br />
There are too much features to describe them all here. You can read the plugins manpages online:<br />
# [http://winni.vdr-developer.org/epgsearch/en/epgsearch.1.html README]<br />
# [http://winni.vdr-developer.org/epgsearch/en/epgsearch.4.html MANUAL]<br />
<br />
==Configuration==<br />
This plugin can be used as standard schedule viewer. therefore the '''/etc/vdr/[[keymacros.conf]]''' file has to altered<br />
# Remote control key macros for VDR<br />
#<br />
# Format:<br />
#<br />
# macrokey key1 key2 key3...<br />
# macrokey @plugin key1 key2 key3...<br />
#<br />
# See man vdr(5)<br />
<br />
Red @pilot<br />
Green @epgsearch<br />
^^^^^^^^^^^^^^^^^^^^^<br />
Blue Timers<br />
Yellow @prefermenu<br />
<br />
===[[SVDRP]] commands===<br />
{| class="wikitable"<br />
|-<br />
!Parameter<br />
!Description<br />
|-<br />
| LSTS [ID] || Lists all searches, or the search with the given ID [ID].<br />
The output is the same as the contents of epgsearch.conf.<br />
|-<br />
| NEWS&nbsp;<settings> || Adds a new search. <settings> is formatted as epgsearch.conf. Hint: ID needs to be given, but is ignored and a new ID is generated.<br />
|-<br />
| DELS <ID> || Deletes search with given ID <ID>.<br />
|-<br />
| EDIS <settings> || modifies a a search.<br />
|-<br />
| UPDS [OSD] || Trigger update of search timers. If OSD is given, a message appears on OSD as soon as update is finished.<br />
|-<br />
| UPDD || re-read epgsearchdone.data after file change with external tool.<br />
|-<br />
| SETS <nowiki><ON|OFF></nowiki> || de-/activate thread for search timers.<br />
|-<br />
| FIND <settings> || find EPG events matching to &lt;settings&gt;<br />
|}<br />
<br />
There are more [[SVDRP]] commands. For a complete list, read the [http://winni.vdr-developer.org/epgsearch/en/epgsearch.4.html#9__svdrp_interface MANUAL].<br />
<br />
==Installation==<br />
===Makefile options===<br />
{| class="wikitable"<br />
|-<br />
| bgcolor=#efefef | #WITHOUT_EPGSEARCHONLY = 1<br />
| uncomment if mini plugin epgsearchonly should not be build. <br />
epgsearchonly generates a main menue entry "Search" and is a shortcut for search timers. <br />
|-<br />
| bgcolor=#efefef | #WITHOUT_CONFLICTCHECKONLY = 1<br />
| uncomment if mini plugin conflictcheckonly should not be build. <br />
conflictcheckonly generates a main menue entry "Timer conflicts" and is a shortcut for "Search timer/Actions/Check timer conflicts". <br />
|-<br />
| bgcolor=#efefef | #WITHOUT_QUICKSEARCH = 1<br />
| uncomment if mini plugin quicksearch should not be build. <br />
quicksearch generates a main menue entry "fast search" and serves as a fast EPG search without need to create a search timer.<br />
|-<br />
| bgcolor=#efefef | #HAVE_PCREPOSIX = 1<br />
| uncomment, if PERL compat regExp (Perl compatible regular expressions, PCRE) should be used.<br />
|-<br />
| bgcolor=#efefef | #HAVE_LIBTRE = 1<br />
| uncomment, if libtre is installed<br />
|}<br />
<br />
==Software Requirements==<br />
* (P)erl-(c)ompatible (r)egular (e)xpression library, PCRE (optional)<br />
* TRE library (optional)<br />
<br />
==Version History==<br />
{| width=100% class="wikitable"<br />
|-<br />
! Version<br />
! Date<br />
! Description<br />
! Link<br />
|-<br />
| 1.0.1.beta5<br />
| 29.03.2013<br />
|<br />
| [http://winni.vdr-developer.org/epgsearch/downloads/beta/vdr-epgsearch-1.0.1.beta5.tgz 1.0.1.beta5]<br />
|-<br />
| 1.0.0 (Current Version)<br />
| 11.09.2011<br />
|<br />
| [http://winni.vdr-developer.org/epgsearch/downloads/vdr-epgsearch-1.0.0.tgz 1.0.0]<br />
|}<br />
<br />
==Bugs and wish list==<br />
* [http://projects.vdr-developer.org/projects/plg-epgsearch Bug Tracker]<br />
* [http://www.vdr-developer.org/mailman/listinfo/epgsearch Mailing list]<br />
<br />
==CurrentVersion==<br />
[http://winni.vdr-developer.org/epgsearch/downloads/vdr-epgsearch-1.0.0.tgz Version 1.0.0]<br />
<br />
==Links==<br />
# [http://winni.vdr-developer.org/epgsearch Plugins Homepage]<br />
# [http://www.pcre.org Perl-compatible regular expression library]<br />
# [http://projects.vdr-developer.org/git/?p=vdr-plugin-epgsearch.git GIT-Repository]<br />
<br />
[[Category:Plugins]]<br />
[[Category:EPG_and_Co]]<br />
[[Category:Timer- and recordings plugins]]<br />
<br />
{{i18n|epgsearch-plugin}}</div>Wirbelhttps://www.linuxtv.org/vdrwiki/index.php?title=Epgsearch-plugin&diff=6528Epgsearch-plugin2013-12-03T14:58:41Z<p>Wirbel: /* Links */</p>
<hr />
<div>==Description==<br />
<br />
===Author:=== Christian Wieninger<br />
<br />
'''EPG Search''' can be used a replacement [[EPG]] view. It extends the standard EPG view (ie. search for rebroadcasts), a command menu for epg events and a search function for EPG. The search may create automatically timers.<br />
<br />
This 'search timers', search for broadcasts in the background and add a timer if one matches (similar to VDRAdmin's auto-timers) or simply announce it via OSD. Once you have created your searches, any programme(s) matching your criteria (Programme title/description; start/end time; channel etc.), it will be recorded. So you can record every episode of a series automatically.<br />
<br />
A timer-conflict-check checks in the background for overlapping timers and if one cannot be record it informs the user via OSD. The conflict can then be resolved with an easy to handle OSD menu.<br />
<br />
Epgsearch can inform you with an email at timer-updates and/or at timer-conflicts and you can use user defined variables for use in searchtimers and for calling external scripts to influence timer creation.<br />
<br />
===Status===<br />
<br />
Last Update 09/2011<br />
<br />
==Images==<br />
<gallery><br />
Image:epgsearch-plugin-00.jpg|''Overview - Now''<br />
Image:epgsearch-plugin-01.png|''Overview - Now''<br />
Image:epgsearch-plugin-02.jpg|''example notification email''<br />
</gallery><br />
<br />
==Usage==<br />
There are too much features to describe them all here. You can read the plugins manpages online:<br />
# [http://winni.vdr-developer.org/epgsearch/en/epgsearch.1.html README]<br />
# [http://winni.vdr-developer.org/epgsearch/en/epgsearch.4.html MANUAL]<br />
<br />
==Configuration==<br />
This plugin can be used as standard schedule viewer. therefore the '''/etc/vdr/[[keymacros.conf]]''' file has to altered<br />
# Remote control key macros for VDR<br />
#<br />
# Format:<br />
#<br />
# macrokey key1 key2 key3...<br />
# macrokey @plugin key1 key2 key3...<br />
#<br />
# See man vdr(5)<br />
<br />
Red @pilot<br />
Green @epgsearch<br />
^^^^^^^^^^^^^^^^^^^^^<br />
Blue Timers<br />
Yellow @prefermenu<br />
<br />
===[[SVDRP]] commands===<br />
{| class="wikitable"<br />
|-<br />
!Parameter<br />
!Description<br />
|-<br />
| LSTS [ID] || Lists all searches, or the search with the given ID [ID].<br />
The output is the same as the contents of epgsearch.conf.<br />
|-<br />
| NEWS&nbsp;<settings> || Adds a new search. <settings> is formatted as epgsearch.conf. Hint: ID needs to be given, but is ignored and a new ID is generated.<br />
|-<br />
| DELS <ID> || Deletes search with given ID <ID>.<br />
|-<br />
| EDIS <settings> || modifies a a search.<br />
|-<br />
| UPDS [OSD] || Trigger update of search timers. If OSD is given, a message appears on OSD as soon as update is finished.<br />
|-<br />
| UPDD || re-read epgsearchdone.data after file change with external tool.<br />
|-<br />
| SETS <nowiki><ON|OFF></nowiki> || de-/activate thread for search timers.<br />
|-<br />
| FIND <settings> || find EPG events matching to &lt;settings&gt;<br />
|}<br />
<br />
There are more [[SVDRP]] commands. For a complete list, read the [http://winni.vdr-developer.org/epgsearch/en/epgsearch.4.html#9__svdrp_interface MANUAL].<br />
<br />
==Installation==<br />
===Makefile options===<br />
{| class="wikitable"<br />
|-<br />
| bgcolor=#efefef | #WITHOUT_EPGSEARCHONLY = 1<br />
| uncomment if mini plugin epgsearchonly should not be build. <br />
epgsearchonly generates a main menue entry "Search" and is a shortcut for search timers. <br />
|-<br />
| bgcolor=#efefef | #WITHOUT_CONFLICTCHECKONLY = 1<br />
| uncomment if mini plugin conflictcheckonly should not be build. <br />
conflictcheckonly generates a main menue entry "Timer conflicts" and is a shortcut for "Search timer/Actions/Check timer conflicts". <br />
|-<br />
| bgcolor=#efefef | #WITHOUT_QUICKSEARCH = 1<br />
| uncomment if mini plugin quicksearch should not be build. <br />
quicksearch generates a main menue entry "fast search" and serves as a fast EPG search without need to create a search timer.<br />
|-<br />
| bgcolor=#efefef | #HAVE_PCREPOSIX = 1<br />
| uncomment, if PERL compat regExp (Perl compatible regular expressions, PCRE) should be used.<br />
|-<br />
| bgcolor=#efefef | #HAVE_LIBTRE = 1<br />
| uncomment, if libtre is installed<br />
|}<br />
<br />
==Software Requirements==<br />
* (P)erl-(c)ompatible (r)egular (e)xpression library, PCRE (optional)<br />
* TRE library (optional)<br />
<br />
==Version History==<br />
{| width=100% class="wikitable"<br />
|-<br />
! Version<br />
! Date<br />
! Description<br />
! Link<br />
|-<br />
| 1.0.1.beta5<br />
| 29.03.2013<br />
|<br />
| [http://winni.vdr-developer.org/epgsearch/downloads/beta/vdr-epgsearch-1.0.1.beta5.tgz 1.0.1.beta5]<br />
|-<br />
| 1.0.0 (Current Version)<br />
| 11.09.2011<br />
|<br />
| [http://winni.vdr-developer.org/epgsearch/downloads/vdr-epgsearch-1.0.0.tgz 1.0.0]<br />
|}<br />
<br />
==Bugs and wish list==<br />
* [http://projects.vdr-developer.org/projects/plg-epgsearch Bug Tracker]<br />
* [http://www.vdr-developer.org/mailman/listinfo/epgsearch Mailing list]<br />
<br />
==CurrentVersion==<br />
[http://winni.vdr-developer.org/epgsearch/downloads/vdr-epgsearch-1.0.0.tgz Version 1.0.0]<br />
<br />
==Links==<br />
# [http://winni.vdr-developer.org/epgsearch Plugins Homepage]<br />
# [http://www.pcre.org Perl-compatible regular expression library]<br />
# [http://projects.vdr-developer.org/git/?p=vdr-plugin-epgsearch.git GIT-Repository]<br />
<br />
[[Category:Plugins]]<br />
[[Category:EPG_and_Co]]<br />
[[Category:Timer- and recordings plugins]]<br />
<br />
{{i18n|epgsearch-plugin}}</div>Wirbelhttps://www.linuxtv.org/vdrwiki/index.php?title=Epgsearch-plugin&diff=6527Epgsearch-plugin2013-12-03T14:58:07Z<p>Wirbel: /* Links */</p>
<hr />
<div>==Description==<br />
<br />
===Author:=== Christian Wieninger<br />
<br />
'''EPG Search''' can be used a replacement [[EPG]] view. It extends the standard EPG view (ie. search for rebroadcasts), a command menu for epg events and a search function for EPG. The search may create automatically timers.<br />
<br />
This 'search timers', search for broadcasts in the background and add a timer if one matches (similar to VDRAdmin's auto-timers) or simply announce it via OSD. Once you have created your searches, any programme(s) matching your criteria (Programme title/description; start/end time; channel etc.), it will be recorded. So you can record every episode of a series automatically.<br />
<br />
A timer-conflict-check checks in the background for overlapping timers and if one cannot be record it informs the user via OSD. The conflict can then be resolved with an easy to handle OSD menu.<br />
<br />
Epgsearch can inform you with an email at timer-updates and/or at timer-conflicts and you can use user defined variables for use in searchtimers and for calling external scripts to influence timer creation.<br />
<br />
===Status===<br />
<br />
Last Update 09/2011<br />
<br />
==Images==<br />
<gallery><br />
Image:epgsearch-plugin-00.jpg|''Overview - Now''<br />
Image:epgsearch-plugin-01.png|''Overview - Now''<br />
Image:epgsearch-plugin-02.jpg|''example notification email''<br />
</gallery><br />
<br />
==Usage==<br />
There are too much features to describe them all here. You can read the plugins manpages online:<br />
# [http://winni.vdr-developer.org/epgsearch/en/epgsearch.1.html README]<br />
# [http://winni.vdr-developer.org/epgsearch/en/epgsearch.4.html MANUAL]<br />
<br />
==Configuration==<br />
This plugin can be used as standard schedule viewer. therefore the '''/etc/vdr/[[keymacros.conf]]''' file has to altered<br />
# Remote control key macros for VDR<br />
#<br />
# Format:<br />
#<br />
# macrokey key1 key2 key3...<br />
# macrokey @plugin key1 key2 key3...<br />
#<br />
# See man vdr(5)<br />
<br />
Red @pilot<br />
Green @epgsearch<br />
^^^^^^^^^^^^^^^^^^^^^<br />
Blue Timers<br />
Yellow @prefermenu<br />
<br />
===[[SVDRP]] commands===<br />
{| class="wikitable"<br />
|-<br />
!Parameter<br />
!Description<br />
|-<br />
| LSTS [ID] || Lists all searches, or the search with the given ID [ID].<br />
The output is the same as the contents of epgsearch.conf.<br />
|-<br />
| NEWS&nbsp;<settings> || Adds a new search. <settings> is formatted as epgsearch.conf. Hint: ID needs to be given, but is ignored and a new ID is generated.<br />
|-<br />
| DELS <ID> || Deletes search with given ID <ID>.<br />
|-<br />
| EDIS <settings> || modifies a a search.<br />
|-<br />
| UPDS [OSD] || Trigger update of search timers. If OSD is given, a message appears on OSD as soon as update is finished.<br />
|-<br />
| UPDD || re-read epgsearchdone.data after file change with external tool.<br />
|-<br />
| SETS <nowiki><ON|OFF></nowiki> || de-/activate thread for search timers.<br />
|-<br />
| FIND <settings> || find EPG events matching to &lt;settings&gt;<br />
|}<br />
<br />
There are more [[SVDRP]] commands. For a complete list, read the [http://winni.vdr-developer.org/epgsearch/en/epgsearch.4.html#9__svdrp_interface MANUAL].<br />
<br />
==Installation==<br />
===Makefile options===<br />
{| class="wikitable"<br />
|-<br />
| bgcolor=#efefef | #WITHOUT_EPGSEARCHONLY = 1<br />
| uncomment if mini plugin epgsearchonly should not be build. <br />
epgsearchonly generates a main menue entry "Search" and is a shortcut for search timers. <br />
|-<br />
| bgcolor=#efefef | #WITHOUT_CONFLICTCHECKONLY = 1<br />
| uncomment if mini plugin conflictcheckonly should not be build. <br />
conflictcheckonly generates a main menue entry "Timer conflicts" and is a shortcut for "Search timer/Actions/Check timer conflicts". <br />
|-<br />
| bgcolor=#efefef | #WITHOUT_QUICKSEARCH = 1<br />
| uncomment if mini plugin quicksearch should not be build. <br />
quicksearch generates a main menue entry "fast search" and serves as a fast EPG search without need to create a search timer.<br />
|-<br />
| bgcolor=#efefef | #HAVE_PCREPOSIX = 1<br />
| uncomment, if PERL compat regExp (Perl compatible regular expressions, PCRE) should be used.<br />
|-<br />
| bgcolor=#efefef | #HAVE_LIBTRE = 1<br />
| uncomment, if libtre is installed<br />
|}<br />
<br />
==Software Requirements==<br />
* (P)erl-(c)ompatible (r)egular (e)xpression library, PCRE (optional)<br />
* TRE library (optional)<br />
<br />
==Version History==<br />
{| width=100% class="wikitable"<br />
|-<br />
! Version<br />
! Date<br />
! Description<br />
! Link<br />
|-<br />
| 1.0.1.beta5<br />
| 29.03.2013<br />
|<br />
| [http://winni.vdr-developer.org/epgsearch/downloads/beta/vdr-epgsearch-1.0.1.beta5.tgz 1.0.1.beta5]<br />
|-<br />
| 1.0.0 (Current Version)<br />
| 11.09.2011<br />
|<br />
| [http://winni.vdr-developer.org/epgsearch/downloads/vdr-epgsearch-1.0.0.tgz 1.0.0]<br />
|}<br />
<br />
==Bugs and wish list==<br />
* [http://projects.vdr-developer.org/projects/plg-epgsearch Bug Tracker]<br />
* [http://www.vdr-developer.org/mailman/listinfo/epgsearch Mailing list]<br />
<br />
==CurrentVersion==<br />
[http://winni.vdr-developer.org/epgsearch/downloads/vdr-epgsearch-1.0.0.tgz Version 1.0.0]<br />
<br />
==Links==<br />
# [http://winni.vdr-developer.org/epgsearch Plugins Homepage]<br />
# [http://www.pcre.org Perl-compatible regular expression library]<br />
# [http://projects.vdr-developer.org/git/?p=vdr-plugin-epgsearch.git GIT-Repository]<br />
<br />
[[Category:Plugins]]<br />
[[Category:EPG_and_Co]]<br />
[[Category:Timer- and Aufnahmeplugins]]<br />
<br />
{{i18n|epgsearch-plugin}}</div>Wirbelhttps://www.linuxtv.org/vdrwiki/index.php?title=Epgsearch-plugin&diff=6526Epgsearch-plugin2013-12-03T14:56:26Z<p>Wirbel: /* Problems and wish list */</p>
<hr />
<div>==Description==<br />
<br />
===Author:=== Christian Wieninger<br />
<br />
'''EPG Search''' can be used a replacement [[EPG]] view. It extends the standard EPG view (ie. search for rebroadcasts), a command menu for epg events and a search function for EPG. The search may create automatically timers.<br />
<br />
This 'search timers', search for broadcasts in the background and add a timer if one matches (similar to VDRAdmin's auto-timers) or simply announce it via OSD. Once you have created your searches, any programme(s) matching your criteria (Programme title/description; start/end time; channel etc.), it will be recorded. So you can record every episode of a series automatically.<br />
<br />
A timer-conflict-check checks in the background for overlapping timers and if one cannot be record it informs the user via OSD. The conflict can then be resolved with an easy to handle OSD menu.<br />
<br />
Epgsearch can inform you with an email at timer-updates and/or at timer-conflicts and you can use user defined variables for use in searchtimers and for calling external scripts to influence timer creation.<br />
<br />
===Status===<br />
<br />
Last Update 09/2011<br />
<br />
==Images==<br />
<gallery><br />
Image:epgsearch-plugin-00.jpg|''Overview - Now''<br />
Image:epgsearch-plugin-01.png|''Overview - Now''<br />
Image:epgsearch-plugin-02.jpg|''example notification email''<br />
</gallery><br />
<br />
==Usage==<br />
There are too much features to describe them all here. You can read the plugins manpages online:<br />
# [http://winni.vdr-developer.org/epgsearch/en/epgsearch.1.html README]<br />
# [http://winni.vdr-developer.org/epgsearch/en/epgsearch.4.html MANUAL]<br />
<br />
==Configuration==<br />
This plugin can be used as standard schedule viewer. therefore the '''/etc/vdr/[[keymacros.conf]]''' file has to altered<br />
# Remote control key macros for VDR<br />
#<br />
# Format:<br />
#<br />
# macrokey key1 key2 key3...<br />
# macrokey @plugin key1 key2 key3...<br />
#<br />
# See man vdr(5)<br />
<br />
Red @pilot<br />
Green @epgsearch<br />
^^^^^^^^^^^^^^^^^^^^^<br />
Blue Timers<br />
Yellow @prefermenu<br />
<br />
===[[SVDRP]] commands===<br />
{| class="wikitable"<br />
|-<br />
!Parameter<br />
!Description<br />
|-<br />
| LSTS [ID] || Lists all searches, or the search with the given ID [ID].<br />
The output is the same as the contents of epgsearch.conf.<br />
|-<br />
| NEWS&nbsp;<settings> || Adds a new search. <settings> is formatted as epgsearch.conf. Hint: ID needs to be given, but is ignored and a new ID is generated.<br />
|-<br />
| DELS <ID> || Deletes search with given ID <ID>.<br />
|-<br />
| EDIS <settings> || modifies a a search.<br />
|-<br />
| UPDS [OSD] || Trigger update of search timers. If OSD is given, a message appears on OSD as soon as update is finished.<br />
|-<br />
| UPDD || re-read epgsearchdone.data after file change with external tool.<br />
|-<br />
| SETS <nowiki><ON|OFF></nowiki> || de-/activate thread for search timers.<br />
|-<br />
| FIND <settings> || find EPG events matching to &lt;settings&gt;<br />
|}<br />
<br />
There are more [[SVDRP]] commands. For a complete list, read the [http://winni.vdr-developer.org/epgsearch/en/epgsearch.4.html#9__svdrp_interface MANUAL].<br />
<br />
==Installation==<br />
===Makefile options===<br />
{| class="wikitable"<br />
|-<br />
| bgcolor=#efefef | #WITHOUT_EPGSEARCHONLY = 1<br />
| uncomment if mini plugin epgsearchonly should not be build. <br />
epgsearchonly generates a main menue entry "Search" and is a shortcut for search timers. <br />
|-<br />
| bgcolor=#efefef | #WITHOUT_CONFLICTCHECKONLY = 1<br />
| uncomment if mini plugin conflictcheckonly should not be build. <br />
conflictcheckonly generates a main menue entry "Timer conflicts" and is a shortcut for "Search timer/Actions/Check timer conflicts". <br />
|-<br />
| bgcolor=#efefef | #WITHOUT_QUICKSEARCH = 1<br />
| uncomment if mini plugin quicksearch should not be build. <br />
quicksearch generates a main menue entry "fast search" and serves as a fast EPG search without need to create a search timer.<br />
|-<br />
| bgcolor=#efefef | #HAVE_PCREPOSIX = 1<br />
| uncomment, if PERL compat regExp (Perl compatible regular expressions, PCRE) should be used.<br />
|-<br />
| bgcolor=#efefef | #HAVE_LIBTRE = 1<br />
| uncomment, if libtre is installed<br />
|}<br />
<br />
==Software Requirements==<br />
* (P)erl-(c)ompatible (r)egular (e)xpression library, PCRE (optional)<br />
* TRE library (optional)<br />
<br />
==Version History==<br />
{| width=100% class="wikitable"<br />
|-<br />
! Version<br />
! Date<br />
! Description<br />
! Link<br />
|-<br />
| 1.0.1.beta5<br />
| 29.03.2013<br />
|<br />
| [http://winni.vdr-developer.org/epgsearch/downloads/beta/vdr-epgsearch-1.0.1.beta5.tgz 1.0.1.beta5]<br />
|-<br />
| 1.0.0 (Current Version)<br />
| 11.09.2011<br />
|<br />
| [http://winni.vdr-developer.org/epgsearch/downloads/vdr-epgsearch-1.0.0.tgz 1.0.0]<br />
|}<br />
<br />
==Bugs and wish list==<br />
* [http://projects.vdr-developer.org/projects/plg-epgsearch Bug Tracker]<br />
* [http://www.vdr-developer.org/mailman/listinfo/epgsearch Mailing list]<br />
<br />
==Links==<br />
<br />
# [http://winni.vdr-developer.org/epgsearch/index_eng.html Plugin homepage]<br />
<br />
[[Category:Plugins]]<br />
<br />
{{i18n|epgsearch-plugin}}</div>Wirbelhttps://www.linuxtv.org/vdrwiki/index.php?title=Epgsearch-plugin&diff=6525Epgsearch-plugin2013-12-03T14:55:40Z<p>Wirbel: /* Problems and wish list */</p>
<hr />
<div>==Description==<br />
<br />
===Author:=== Christian Wieninger<br />
<br />
'''EPG Search''' can be used a replacement [[EPG]] view. It extends the standard EPG view (ie. search for rebroadcasts), a command menu for epg events and a search function for EPG. The search may create automatically timers.<br />
<br />
This 'search timers', search for broadcasts in the background and add a timer if one matches (similar to VDRAdmin's auto-timers) or simply announce it via OSD. Once you have created your searches, any programme(s) matching your criteria (Programme title/description; start/end time; channel etc.), it will be recorded. So you can record every episode of a series automatically.<br />
<br />
A timer-conflict-check checks in the background for overlapping timers and if one cannot be record it informs the user via OSD. The conflict can then be resolved with an easy to handle OSD menu.<br />
<br />
Epgsearch can inform you with an email at timer-updates and/or at timer-conflicts and you can use user defined variables for use in searchtimers and for calling external scripts to influence timer creation.<br />
<br />
===Status===<br />
<br />
Last Update 09/2011<br />
<br />
==Images==<br />
<gallery><br />
Image:epgsearch-plugin-00.jpg|''Overview - Now''<br />
Image:epgsearch-plugin-01.png|''Overview - Now''<br />
Image:epgsearch-plugin-02.jpg|''example notification email''<br />
</gallery><br />
<br />
==Usage==<br />
There are too much features to describe them all here. You can read the plugins manpages online:<br />
# [http://winni.vdr-developer.org/epgsearch/en/epgsearch.1.html README]<br />
# [http://winni.vdr-developer.org/epgsearch/en/epgsearch.4.html MANUAL]<br />
<br />
==Configuration==<br />
This plugin can be used as standard schedule viewer. therefore the '''/etc/vdr/[[keymacros.conf]]''' file has to altered<br />
# Remote control key macros for VDR<br />
#<br />
# Format:<br />
#<br />
# macrokey key1 key2 key3...<br />
# macrokey @plugin key1 key2 key3...<br />
#<br />
# See man vdr(5)<br />
<br />
Red @pilot<br />
Green @epgsearch<br />
^^^^^^^^^^^^^^^^^^^^^<br />
Blue Timers<br />
Yellow @prefermenu<br />
<br />
===[[SVDRP]] commands===<br />
{| class="wikitable"<br />
|-<br />
!Parameter<br />
!Description<br />
|-<br />
| LSTS [ID] || Lists all searches, or the search with the given ID [ID].<br />
The output is the same as the contents of epgsearch.conf.<br />
|-<br />
| NEWS&nbsp;<settings> || Adds a new search. <settings> is formatted as epgsearch.conf. Hint: ID needs to be given, but is ignored and a new ID is generated.<br />
|-<br />
| DELS <ID> || Deletes search with given ID <ID>.<br />
|-<br />
| EDIS <settings> || modifies a a search.<br />
|-<br />
| UPDS [OSD] || Trigger update of search timers. If OSD is given, a message appears on OSD as soon as update is finished.<br />
|-<br />
| UPDD || re-read epgsearchdone.data after file change with external tool.<br />
|-<br />
| SETS <nowiki><ON|OFF></nowiki> || de-/activate thread for search timers.<br />
|-<br />
| FIND <settings> || find EPG events matching to &lt;settings&gt;<br />
|}<br />
<br />
There are more [[SVDRP]] commands. For a complete list, read the [http://winni.vdr-developer.org/epgsearch/en/epgsearch.4.html#9__svdrp_interface MANUAL].<br />
<br />
==Installation==<br />
===Makefile options===<br />
{| class="wikitable"<br />
|-<br />
| bgcolor=#efefef | #WITHOUT_EPGSEARCHONLY = 1<br />
| uncomment if mini plugin epgsearchonly should not be build. <br />
epgsearchonly generates a main menue entry "Search" and is a shortcut for search timers. <br />
|-<br />
| bgcolor=#efefef | #WITHOUT_CONFLICTCHECKONLY = 1<br />
| uncomment if mini plugin conflictcheckonly should not be build. <br />
conflictcheckonly generates a main menue entry "Timer conflicts" and is a shortcut for "Search timer/Actions/Check timer conflicts". <br />
|-<br />
| bgcolor=#efefef | #WITHOUT_QUICKSEARCH = 1<br />
| uncomment if mini plugin quicksearch should not be build. <br />
quicksearch generates a main menue entry "fast search" and serves as a fast EPG search without need to create a search timer.<br />
|-<br />
| bgcolor=#efefef | #HAVE_PCREPOSIX = 1<br />
| uncomment, if PERL compat regExp (Perl compatible regular expressions, PCRE) should be used.<br />
|-<br />
| bgcolor=#efefef | #HAVE_LIBTRE = 1<br />
| uncomment, if libtre is installed<br />
|}<br />
<br />
==Software Requirements==<br />
* (P)erl-(c)ompatible (r)egular (e)xpression library, PCRE (optional)<br />
* TRE library (optional)<br />
<br />
==Version History==<br />
{| width=100% class="wikitable"<br />
|-<br />
! Version<br />
! Date<br />
! Description<br />
! Link<br />
|-<br />
| 1.0.1.beta5<br />
| 29.03.2013<br />
|<br />
| [http://winni.vdr-developer.org/epgsearch/downloads/beta/vdr-epgsearch-1.0.1.beta5.tgz 1.0.1.beta5]<br />
|-<br />
| 1.0.0 (Current Version)<br />
| 11.09.2011<br />
|<br />
| [http://winni.vdr-developer.org/epgsearch/downloads/vdr-epgsearch-1.0.0.tgz 1.0.0]<br />
|}<br />
<br />
==Problems and wish list==<br />
* [http://www.vdr-developer.org/mantisbt/ Bug tracker]<br />
* [http://www.vdr-developer.org/mailman/listinfo/epgsearch Mailingliste]<br />
<br />
==Links==<br />
<br />
# [http://winni.vdr-developer.org/epgsearch/index_eng.html Plugin homepage]<br />
<br />
[[Category:Plugins]]<br />
<br />
{{i18n|epgsearch-plugin}}</div>Wirbelhttps://www.linuxtv.org/vdrwiki/index.php?title=Epgsearch-plugin&diff=6524Epgsearch-plugin2013-12-03T14:53:36Z<p>Wirbel: /* Software Requirements */</p>
<hr />
<div>==Description==<br />
<br />
===Author:=== Christian Wieninger<br />
<br />
'''EPG Search''' can be used a replacement [[EPG]] view. It extends the standard EPG view (ie. search for rebroadcasts), a command menu for epg events and a search function for EPG. The search may create automatically timers.<br />
<br />
This 'search timers', search for broadcasts in the background and add a timer if one matches (similar to VDRAdmin's auto-timers) or simply announce it via OSD. Once you have created your searches, any programme(s) matching your criteria (Programme title/description; start/end time; channel etc.), it will be recorded. So you can record every episode of a series automatically.<br />
<br />
A timer-conflict-check checks in the background for overlapping timers and if one cannot be record it informs the user via OSD. The conflict can then be resolved with an easy to handle OSD menu.<br />
<br />
Epgsearch can inform you with an email at timer-updates and/or at timer-conflicts and you can use user defined variables for use in searchtimers and for calling external scripts to influence timer creation.<br />
<br />
===Status===<br />
<br />
Last Update 09/2011<br />
<br />
==Images==<br />
<gallery><br />
Image:epgsearch-plugin-00.jpg|''Overview - Now''<br />
Image:epgsearch-plugin-01.png|''Overview - Now''<br />
Image:epgsearch-plugin-02.jpg|''example notification email''<br />
</gallery><br />
<br />
==Usage==<br />
There are too much features to describe them all here. You can read the plugins manpages online:<br />
# [http://winni.vdr-developer.org/epgsearch/en/epgsearch.1.html README]<br />
# [http://winni.vdr-developer.org/epgsearch/en/epgsearch.4.html MANUAL]<br />
<br />
==Configuration==<br />
This plugin can be used as standard schedule viewer. therefore the '''/etc/vdr/[[keymacros.conf]]''' file has to altered<br />
# Remote control key macros for VDR<br />
#<br />
# Format:<br />
#<br />
# macrokey key1 key2 key3...<br />
# macrokey @plugin key1 key2 key3...<br />
#<br />
# See man vdr(5)<br />
<br />
Red @pilot<br />
Green @epgsearch<br />
^^^^^^^^^^^^^^^^^^^^^<br />
Blue Timers<br />
Yellow @prefermenu<br />
<br />
===[[SVDRP]] commands===<br />
{| class="wikitable"<br />
|-<br />
!Parameter<br />
!Description<br />
|-<br />
| LSTS [ID] || Lists all searches, or the search with the given ID [ID].<br />
The output is the same as the contents of epgsearch.conf.<br />
|-<br />
| NEWS&nbsp;<settings> || Adds a new search. <settings> is formatted as epgsearch.conf. Hint: ID needs to be given, but is ignored and a new ID is generated.<br />
|-<br />
| DELS <ID> || Deletes search with given ID <ID>.<br />
|-<br />
| EDIS <settings> || modifies a a search.<br />
|-<br />
| UPDS [OSD] || Trigger update of search timers. If OSD is given, a message appears on OSD as soon as update is finished.<br />
|-<br />
| UPDD || re-read epgsearchdone.data after file change with external tool.<br />
|-<br />
| SETS <nowiki><ON|OFF></nowiki> || de-/activate thread for search timers.<br />
|-<br />
| FIND <settings> || find EPG events matching to &lt;settings&gt;<br />
|}<br />
<br />
There are more [[SVDRP]] commands. For a complete list, read the [http://winni.vdr-developer.org/epgsearch/en/epgsearch.4.html#9__svdrp_interface MANUAL].<br />
<br />
==Installation==<br />
===Makefile options===<br />
{| class="wikitable"<br />
|-<br />
| bgcolor=#efefef | #WITHOUT_EPGSEARCHONLY = 1<br />
| uncomment if mini plugin epgsearchonly should not be build. <br />
epgsearchonly generates a main menue entry "Search" and is a shortcut for search timers. <br />
|-<br />
| bgcolor=#efefef | #WITHOUT_CONFLICTCHECKONLY = 1<br />
| uncomment if mini plugin conflictcheckonly should not be build. <br />
conflictcheckonly generates a main menue entry "Timer conflicts" and is a shortcut for "Search timer/Actions/Check timer conflicts". <br />
|-<br />
| bgcolor=#efefef | #WITHOUT_QUICKSEARCH = 1<br />
| uncomment if mini plugin quicksearch should not be build. <br />
quicksearch generates a main menue entry "fast search" and serves as a fast EPG search without need to create a search timer.<br />
|-<br />
| bgcolor=#efefef | #HAVE_PCREPOSIX = 1<br />
| uncomment, if PERL compat regExp (Perl compatible regular expressions, PCRE) should be used.<br />
|-<br />
| bgcolor=#efefef | #HAVE_LIBTRE = 1<br />
| uncomment, if libtre is installed<br />
|}<br />
<br />
==Software Requirements==<br />
* (P)erl-(c)ompatible (r)egular (e)xpression library, PCRE (optional)<br />
* TRE library (optional)<br />
<br />
==Problems and wish list==<br />
* [http://www.vdr-developer.org/mantisbt/ Bug tracker]<br />
* [http://www.vdr-developer.org/mailman/listinfo/epgsearch Mailingliste]<br />
<br />
==Links==<br />
<br />
# [http://winni.vdr-developer.org/epgsearch/index_eng.html Plugin homepage]<br />
<br />
[[Category:Plugins]]<br />
<br />
{{i18n|epgsearch-plugin}}</div>Wirbelhttps://www.linuxtv.org/vdrwiki/index.php?title=Epgsearch-plugin&diff=6523Epgsearch-plugin2013-12-03T14:46:54Z<p>Wirbel: /* Problems and wish list */</p>
<hr />
<div>==Description==<br />
<br />
===Author:=== Christian Wieninger<br />
<br />
'''EPG Search''' can be used a replacement [[EPG]] view. It extends the standard EPG view (ie. search for rebroadcasts), a command menu for epg events and a search function for EPG. The search may create automatically timers.<br />
<br />
This 'search timers', search for broadcasts in the background and add a timer if one matches (similar to VDRAdmin's auto-timers) or simply announce it via OSD. Once you have created your searches, any programme(s) matching your criteria (Programme title/description; start/end time; channel etc.), it will be recorded. So you can record every episode of a series automatically.<br />
<br />
A timer-conflict-check checks in the background for overlapping timers and if one cannot be record it informs the user via OSD. The conflict can then be resolved with an easy to handle OSD menu.<br />
<br />
Epgsearch can inform you with an email at timer-updates and/or at timer-conflicts and you can use user defined variables for use in searchtimers and for calling external scripts to influence timer creation.<br />
<br />
===Status===<br />
<br />
Last Update 09/2011<br />
<br />
==Images==<br />
<gallery><br />
Image:epgsearch-plugin-00.jpg|''Overview - Now''<br />
Image:epgsearch-plugin-01.png|''Overview - Now''<br />
Image:epgsearch-plugin-02.jpg|''example notification email''<br />
</gallery><br />
<br />
==Usage==<br />
There are too much features to describe them all here. You can read the plugins manpages online:<br />
# [http://winni.vdr-developer.org/epgsearch/en/epgsearch.1.html README]<br />
# [http://winni.vdr-developer.org/epgsearch/en/epgsearch.4.html MANUAL]<br />
<br />
==Configuration==<br />
This plugin can be used as standard schedule viewer. therefore the '''/etc/vdr/[[keymacros.conf]]''' file has to altered<br />
# Remote control key macros for VDR<br />
#<br />
# Format:<br />
#<br />
# macrokey key1 key2 key3...<br />
# macrokey @plugin key1 key2 key3...<br />
#<br />
# See man vdr(5)<br />
<br />
Red @pilot<br />
Green @epgsearch<br />
^^^^^^^^^^^^^^^^^^^^^<br />
Blue Timers<br />
Yellow @prefermenu<br />
<br />
===[[SVDRP]] commands===<br />
{| class="wikitable"<br />
|-<br />
!Parameter<br />
!Description<br />
|-<br />
| LSTS [ID] || Lists all searches, or the search with the given ID [ID].<br />
The output is the same as the contents of epgsearch.conf.<br />
|-<br />
| NEWS&nbsp;<settings> || Adds a new search. <settings> is formatted as epgsearch.conf. Hint: ID needs to be given, but is ignored and a new ID is generated.<br />
|-<br />
| DELS <ID> || Deletes search with given ID <ID>.<br />
|-<br />
| EDIS <settings> || modifies a a search.<br />
|-<br />
| UPDS [OSD] || Trigger update of search timers. If OSD is given, a message appears on OSD as soon as update is finished.<br />
|-<br />
| UPDD || re-read epgsearchdone.data after file change with external tool.<br />
|-<br />
| SETS <nowiki><ON|OFF></nowiki> || de-/activate thread for search timers.<br />
|-<br />
| FIND <settings> || find EPG events matching to &lt;settings&gt;<br />
|}<br />
<br />
There are more [[SVDRP]] commands. For a complete list, read the [http://winni.vdr-developer.org/epgsearch/en/epgsearch.4.html#9__svdrp_interface MANUAL].<br />
<br />
==Software Requirements==<br />
* (P)erl-(c)ompatible (r)egular (e)xpression library, PCRE (optional)<br />
* TRE library (optional)<br />
<br />
==Problems and wish list==<br />
* [http://www.vdr-developer.org/mantisbt/ Bug tracker]<br />
* [http://www.vdr-developer.org/mailman/listinfo/epgsearch Mailingliste]<br />
<br />
==Links==<br />
<br />
# [http://winni.vdr-developer.org/epgsearch/index_eng.html Plugin homepage]<br />
<br />
[[Category:Plugins]]<br />
<br />
{{i18n|epgsearch-plugin}}</div>Wirbelhttps://www.linuxtv.org/vdrwiki/index.php?title=Epgsearch-plugin&diff=6522Epgsearch-plugin2013-12-03T14:41:17Z<p>Wirbel: </p>
<hr />
<div>==Description==<br />
<br />
===Author:=== Christian Wieninger<br />
<br />
'''EPG Search''' can be used a replacement [[EPG]] view. It extends the standard EPG view (ie. search for rebroadcasts), a command menu for epg events and a search function for EPG. The search may create automatically timers.<br />
<br />
This 'search timers', search for broadcasts in the background and add a timer if one matches (similar to VDRAdmin's auto-timers) or simply announce it via OSD. Once you have created your searches, any programme(s) matching your criteria (Programme title/description; start/end time; channel etc.), it will be recorded. So you can record every episode of a series automatically.<br />
<br />
A timer-conflict-check checks in the background for overlapping timers and if one cannot be record it informs the user via OSD. The conflict can then be resolved with an easy to handle OSD menu.<br />
<br />
Epgsearch can inform you with an email at timer-updates and/or at timer-conflicts and you can use user defined variables for use in searchtimers and for calling external scripts to influence timer creation.<br />
<br />
===Status===<br />
<br />
Last Update 09/2011<br />
<br />
==Images==<br />
<gallery><br />
Image:epgsearch-plugin-00.jpg|''Overview - Now''<br />
Image:epgsearch-plugin-01.png|''Overview - Now''<br />
Image:epgsearch-plugin-02.jpg|''example notification email''<br />
</gallery><br />
<br />
==Usage==<br />
There are too much features to describe them all here. You can read the plugins manpages online:<br />
# [http://winni.vdr-developer.org/epgsearch/en/epgsearch.1.html README]<br />
# [http://winni.vdr-developer.org/epgsearch/en/epgsearch.4.html MANUAL]<br />
<br />
==Configuration==<br />
This plugin can be used as standard schedule viewer. therefore the '''/etc/vdr/[[keymacros.conf]]''' file has to altered<br />
# Remote control key macros for VDR<br />
#<br />
# Format:<br />
#<br />
# macrokey key1 key2 key3...<br />
# macrokey @plugin key1 key2 key3...<br />
#<br />
# See man vdr(5)<br />
<br />
Red @pilot<br />
Green @epgsearch<br />
^^^^^^^^^^^^^^^^^^^^^<br />
Blue Timers<br />
Yellow @prefermenu<br />
<br />
===[[SVDRP]] commands===<br />
{| class="wikitable"<br />
|-<br />
!Parameter<br />
!Description<br />
|-<br />
| LSTS [ID] || Lists all searches, or the search with the given ID [ID].<br />
The output is the same as the contents of epgsearch.conf.<br />
|-<br />
| NEWS&nbsp;<settings> || Adds a new search. <settings> is formatted as epgsearch.conf. Hint: ID needs to be given, but is ignored and a new ID is generated.<br />
|-<br />
| DELS <ID> || Deletes search with given ID <ID>.<br />
|-<br />
| EDIS <settings> || modifies a a search.<br />
|-<br />
| UPDS [OSD] || Trigger update of search timers. If OSD is given, a message appears on OSD as soon as update is finished.<br />
|-<br />
| UPDD || re-read epgsearchdone.data after file change with external tool.<br />
|-<br />
| SETS <nowiki><ON|OFF></nowiki> || de-/activate thread for search timers.<br />
|-<br />
| FIND <settings> || find EPG events matching to &lt;settings&gt;<br />
|}<br />
<br />
There are more [[SVDRP]] commands. For a complete list, read the [http://winni.vdr-developer.org/epgsearch/en/epgsearch.4.html#9__svdrp_interface MANUAL].<br />
<br />
==Problems and wish list==<br />
* [http://www.vdr-developer.org/mantisbt/ Bug tracker]<br />
* [http://www.vdr-developer.org/mailman/listinfo/epgsearch Mailingliste]<br />
<br />
==Links==<br />
<br />
# [http://winni.vdr-developer.org/epgsearch/index_eng.html Plugin homepage]<br />
<br />
[[Category:Plugins]]<br />
<br />
{{i18n|epgsearch-plugin}}</div>Wirbelhttps://www.linuxtv.org/vdrwiki/index.php?title=Epgsearch-plugin&diff=6521Epgsearch-plugin2013-12-03T14:28:52Z<p>Wirbel: /* Hardware requirements */</p>
<hr />
<div>==Description==<br />
<br />
===Author:=== Christian Wieninger<br />
<br />
'''EPG Search''' can be used a replacement [[EPG]] view. It extends the standard EPG view (ie. search for rebroadcasts), a command menu for epg events and a search function for EPG. The search may create automatically timers.<br />
<br />
This 'search timers', search for broadcasts in the background and add a timer if one matches (similar to VDRAdmin's auto-timers) or simply announce it via OSD. Once you have created your searches, any programme(s) matching your criteria (Programme title/description; start/end time; channel etc.), it will be recorded. So you can record every episode of a series automatically.<br />
<br />
A timer-conflict-check checks in the background for overlapping timers and if one cannot be record it informs the user via OSD. The conflict can then be resolved with an easy to handle OSD menu.<br />
<br />
Epgsearch can inform you with an email at timer-updates and/or at timer-conflicts and you can use user defined variables for use in searchtimers and for calling external scripts to influence timer creation.<br />
<br />
===Status===<br />
<br />
Last Update 09/2011<br />
<br />
==Images==<br />
<gallery><br />
Image:epgsearch-plugin-00.jpg|''Overview - Now''<br />
Image:epgsearch-plugin-01.png|''Overview - Now''<br />
Image:epgsearch-plugin-02.jpg|''example notification email''<br />
</gallery><br />
<br />
==Software requirements==<br />
# epgsearch >= Version 0.9.17: only vdr >= 1.3.46<br />
# epgsearch < Version 0.9.16: vdr >= 1.3.7<br />
<br />
==Installation==<br />
See [[plugin installation]].<br />
<br />
{{Box Info|<br />
With version 0.9.18 the default place for the configuration files has changed. Please read the HISTORY.<br />
}}<br />
<br />
There are too much features to describe them all here. But you can read the great documentation online:<br />
# [http://winni.vdr-developer.org/epgsearch/en/epgsearch.1.html README]<br />
# [http://winni.vdr-developer.org/epgsearch/en/epgsearch.4.html MANUAL]<br />
<br />
==Configuration==<br />
This plugin can be used as standard schedule viewer. therefor the '''/etc/vdr/[[keymacros.conf]]''' file has to altered<br />
# Remote control key macros for VDR<br />
#<br />
# Format:<br />
#<br />
# macrokey key1 key2 key3...<br />
# macrokey @plugin key1 key2 key3...<br />
#<br />
# See man vdr(5)<br />
<br />
Red @pilot<br />
Green @epgsearch<br />
^^^^^^^^^^^^^^^^^^^^^<br />
Blue Timers<br />
Yellow @prefermenu<br />
<br />
==Problems and wish list==<br />
* [http://www.vdr-developer.org/mantisbt/ Bug tracker]<br />
* [http://www.vdr-developer.org/mailman/listinfo/epgsearch Mailingliste]<br />
<br />
==Links==<br />
<br />
# [http://winni.vdr-developer.org/epgsearch/index_eng.html Plugin homepage]<br />
<br />
[[Category:Plugins]]<br />
<br />
{{i18n|epgsearch-plugin}}</div>Wirbel