From VDR Wiki

Revision as of 22:27, 30 November 2004 by Monroe (Talk | contribs)
Jump to: navigation, search




Shows DVB signal information on the OSD.

|## Channel Name ######################### [DD][AR][VF][A][D]|
|[==== Signal Strength in % ==============|=================]|
|[==== Signal-to-Noise Ratio in % ========|=================]|
| STR: #0000 (0%)       BER: #00000000       Video: 0 Mbit/s |
| SNR: #0000 (0%)       UNC: #00000000       Audio: 0 kbit/s |
|  [LOCK]     [SIGNAL]     [CARRIER]     [VITERBI]     [SYNC] |

STR     - Signal strength
SNR     - Signal-to-noise ratio
BER     - Bit error rate
UNC     - Uncorrected blocks
Video   - Calculated video bitrate in Mbit/s
Audio   - Calculated audio / AC-3 bitrate in kbit/s

LOCK    - Everything's working...
SIGNAL  - Found something above the noise level
CARRIER - Found a DVB signal
VITERBI - FEC (forward error correction) is stable
SYNC    - Found sync bytes
DD      - AC-3 stream (optional)
AR      - Aspect Ratio: 1:1/4:3/16:9/2.21:1 (optional)
VF      - Video format: PAL/NTSC (optional)
A       - Audio track: 1..2 (optional)
D       - Device number: 0..3 (optional)


Key Description
ChanUp/ChanDn Switch channel up/down
Up/Down Switch channel up/down
0-9 Select channel
Ok Switch between display modes: basic, transponder, stream, AC-3
Right/Left Switch to next/previous device that provides the current channel
Green Select language (APID)
Back Exit plugin

Hardware requirements

  • DVB card

Software requirements


See plugin installation


Option Description
NTSC_SYSTEM=1 added preliminary NTSC support


  • The plugin supports only those DVB cards with _one_ frontend (do any cards with multiple frontends even exist?), because I haven't yet figured howto do it without patching the VDR core.
  • Sometimes (read always) ttxtsubs plugin messes up the OSD - user should disable ttxtsubs, but closing and reopening the femon plugin might help temporarily as well. Btw., this same thing happens with OSDTeletext plugin too :)
  • Disable the stream analysis to speed up heavy zapping sessions.
  • The signal strength and signal-to-noise ratio values are comparable only between the same brand/model frontends. Due to the lack of proper frontend specifications those values cannot be calculated into any real units.
  • Shrinked OSD is available for NTSC users: make NTSC_SYSTEM=1
  • The device switching feature is still non-functional.


[1] http://www.saunalahti.fi/~rahrenbe/vdr/femon Plugin homepage
Personal tools
In other languages