Remote-plugin - Revision history

89.204.153.237: /* Howto use the same card after each boot? */ Update for current "udev" versions

2010-07-22T19:05:46Z

Howto use the same card after each boot?: Update for current "udev" versions

← Older revision		Revision as of 19:05, 22 July 2010
Line 52:		Line 52:
	===Howto use the same card after each boot?===		===Howto use the same card after each boot?===
	If you have 2 or more DVB cards with IR receiver, you have to make sure that the device name is persistent. To use the built-in remote control port of the av711x-based DVB card, make a file in /etc/udev/rules.d/ called 51-vdr.rules (or anything you like) with the following line:		If you have 2 or more DVB cards with IR receiver, you have to make sure that the device name is persistent. To use the built-in remote control port of the av711x-based DVB card, make a file in /etc/udev/rules.d/ called 51-vdr.rules (or anything you like) with the following line:
-	KERNEL=="event*", ~~SYSFS~~{name}=="DVB on-card IR receiver", SYMLINK="input/ir"	+	KERNEL=="event*", ATTRS{name}=="DVB on-card IR receiver", SYMLINK="input/ir"
	If your card is in /dev/input/event2, this makes a symlink /dev/input/ir -> /dev/input/event2. You can check the items to put in the rule simply by		If your card is in /dev/input/event2, this makes a symlink /dev/input/ir -> /dev/input/event2. You can check the items to put in the rule simply by
-	~~udevinfo~~ -a -p $(~~udevinfo~~ -q path -n /dev/input/event2)	+	udevadm info -a -p $(udevadm info -q path -n /dev/input/event2)

	Now you can start vdr by		Now you can start vdr by

213.243.150.204: /* Howto use the same card after each boot? */

2007-05-20T18:13:27Z

Howto use the same card after each boot?

← Older revision		Revision as of 18:13, 20 May 2007
Line 51:		Line 51:
	==Problems==		==Problems==
	===Howto use the same card after each boot?===		===Howto use the same card after each boot?===
-	If you have 2 or more DVB cards with IR receiver, you have to make sure that the device name is persistent. To use the built-in remote control port of a av711x-based DVB card, make a file in /etc/udev/rules.d/ called 51-vdr.rules (or anything you like) with the following line:	+	If you have 2 or more DVB cards with IR receiver, you have to make sure that the device name is persistent. To use the built-in remote control port of the av711x-based DVB card, make a file in /etc/udev/rules.d/ called 51-vdr.rules (or anything you like) with the following line:
	KERNEL=="event*", SYSFS{name}=="DVB on-card IR receiver", SYMLINK="input/ir"		KERNEL=="event*", SYSFS{name}=="DVB on-card IR receiver", SYMLINK="input/ir"
	If your card is in /dev/input/event2, this makes a symlink /dev/input/ir -> /dev/input/event2. You can check the items to put in the rule simply by		If your card is in /dev/input/event2, this makes a symlink /dev/input/ir -> /dev/input/event2. You can check the items to put in the rule simply by

213.243.150.204: /* Howto use the same card after each boot? */

2007-05-20T17:30:13Z

Howto use the same card after each boot?

← Older revision		Revision as of 17:30, 20 May 2007
Line 51:		Line 51:
	==Problems==		==Problems==
	===Howto use the same card after each boot?===		===Howto use the same card after each boot?===
-	If you have 2 or more DVB cards with IR receiver, you have make sure that the device name is persistent. To use ~~FF cards receiver~~, make a file in /etc/udev/rules.d/ called 51-vdr.rules:	+	If you have 2 or more DVB cards with IR receiver, you have to make sure that the device name is persistent. To use the built-in remote control port of a av711x-based DVB card, make a file in /etc/udev/rules.d/ called 51-vdr.rules (or anything you like) with the following line:
	KERNEL=="event*", SYSFS{name}=="DVB on-card IR receiver", SYMLINK="input/ir"		KERNEL=="event*", SYSFS{name}=="DVB on-card IR receiver", SYMLINK="input/ir"
	If your card is in /dev/input/event2, this makes a symlink /dev/input/ir -> /dev/input/event2. You can check the items to put in the rule simply by		If your card is in /dev/input/event2, this makes a symlink /dev/input/ir -> /dev/input/event2. You can check the items to put in the rule simply by

213.243.150.204: /* Problems */

2007-05-20T17:24:51Z

Problems

← Older revision		Revision as of 17:24, 20 May 2007
Line 50:		Line 50:

	==Problems==		==Problems==
		+	===Howto use the same card after each boot?===
		+	If you have 2 or more DVB cards with IR receiver, you have make sure that the device name is persistent. To use FF cards receiver, make a file in /etc/udev/rules.d/ called 51-vdr.rules:
		+	KERNEL=="event*", SYSFS{name}=="DVB on-card IR receiver", SYMLINK="input/ir"
		+	If your card is in /dev/input/event2, this makes a symlink /dev/input/ir -> /dev/input/event2. You can check the items to put in the rule simply by
		+	udevinfo -a -p $(udevinfo -q path -n /dev/input/event2)
		+
		+	Now you can start vdr by
		+	vdr -P"remote -i /dev/input/ir"

	==Links==		==Links==

84.186.39.250: /* Links */ i18n

2006-03-13T16:56:28Z

Links: i18n

← Older revision		Revision as of 16:56, 13 March 2006
Line 60:		Line 60:
	[[Category:Plugins]]		[[Category:Plugins]]

-	~~<!-- Link to german wiki page -->~~	+	{{i18n\|remote-plugin}}
-	~~[[de:Remote~~-plugin]]	+

84.154.234.25 at 23:35, 21 June 2005

2005-06-21T23:35:51Z

← Older revision		Revision as of 23:35, 21 June 2005
Line 54:		Line 54:
	{\|		{\|
	\| [1]		\| [1]
-	\| http://~~endriss.~~escape~~.bei.t~~-~~online~~.de/vdr	+	\| http://escape-edv.de/endriss/vdr
	\| Plugin homepage		\| Plugin homepage
	\|}		\|}

Monroe: rearranged

2004-11-14T22:07:47Z

rearranged

← Older revision		Revision as of 22:07, 14 November 2004
Line 30:		Line 30:
	See [[plugin installation]]		See [[plugin installation]]

-	==Parameter==	+	==Configuration==
		+	===Parameter===
	{\| border=1 cellpadding=2 cellspacing=0		{\| border=1 cellpadding=2 cellspacing=0
	\|- bgcolor=#efdead		\|- bgcolor=#efdead

Monroe: Parameter

2004-10-06T12:10:45Z

Parameter

← Older revision		Revision as of 12:10, 6 October 2004
Line 2:		Line 2:
	[[Image:Remote-plugin.jpg\|thumb\|Screenshot]]		[[Image:Remote-plugin.jpg\|thumb\|Screenshot]]
	The '''remote plugin''' (also called '''remote control plugin''') extends the remote control possibilities of [[VDR]]. It's about a modular add on to VDR, which in particular makes use of the original IR receiver of the Hauppauge Nexus rev. 2.1/2.2 DVB card. Both, the old black and the new silver are supported. Furthermore every remote control that speaks RC-5 could be used.		The '''remote plugin''' (also called '''remote control plugin''') extends the remote control possibilities of [[VDR]]. It's about a modular add on to VDR, which in particular makes use of the original IR receiver of the Hauppauge Nexus rev. 2.1/2.2 DVB card. Both, the old black and the new silver are supported. Furthermore every remote control that speaks RC-5 could be used.
		+
		+	===Supported input devices===
		+	The following remote control devices are supported
		+	* linux input device driver ('''/dev/input/eventX''', X=0,1,2,...)
		+	** built-in remote control port of the av7110-based DVB cards (aka full-featured cards), e.g. DVB-S Nexus (*)
		+	remote control port of some budget cards, e.g. Nova-CI ()
		+	** other input devices (not tested, please report success!)
		+	** See file FAQ for a list of cards which have been reported to work.
		+
		+	* keyboard (tty driver): '''/dev/console''', '''/dev/ttyX'''
		+
		+	* TCP connection (telnet)
		+
		+	* LIRC
		+
		+
		+	(*) supported by DVB and dvb-kernel <br />
		+	(**) supported by dvb-kernel only
		+

	==Hardware requirements==		==Hardware requirements==
Line 10:		Line 29:
	==Installation==		==Installation==
	See [[plugin installation]]		See [[plugin installation]]
		+
		+	==Parameter==
		+	{\| border=1 cellpadding=2 cellspacing=0
		+	\|- bgcolor=#efdead
		+	!Parameter (short)
		+	!Parameter (long)
		+	!Description
		+	\|-
		+	\| -i DEV \|\| --input=DEV \|\| kernel input device (/dev/input/...)
		+	\|-
		+	\| -l DEV \|\| --lirc=DEV \|\| lirc device (default: '''/dev/lircd''')
		+	\|-
		+	\| -p tcp:n \|\| --port=tcp:n \|\| listen on tcp port <n>
		+	\|-
		+	\| -t DEV \|\| --tty=DEV \|\| tty device
		+	\|-
		+	\| -T DEV \|\| --TTY=DEV \|\| tty device with OSD
		+	\|}

	==Problems==		==Problems==

Monroe: initial (unfinished)

2004-09-21T07:34:04Z

initial (unfinished)

← Older revision		Revision as of 07:34, 21 September 2004
Line 1:		Line 1:
	==Description==		==Description==
-	[[Image:~~(missing)~~-plugin.jpg\|thumb\|Screenshot]]	+	[[Image:Remote-plugin.jpg\|thumb\|Screenshot]]
		+	The '''remote plugin''' (also called '''remote control plugin''') extends the remote control possibilities of [[VDR]]. It's about a modular add on to VDR, which in particular makes use of the original IR receiver of the Hauppauge Nexus rev. 2.1/2.2 DVB card. Both, the old black and the new silver are supported. Furthermore every remote control that speaks RC-5 could be used.

	==Hardware requirements==		==Hardware requirements==
		+	See README file

	==Software requirements==		==Software requirements==
Line 14:		Line 16:
	{\|		{\|
	\| [1]		\| [1]
-	\| http://	+	\| http://endriss.escape.bei.t-online.de/vdr
	\| Plugin homepage		\| Plugin homepage
	\|}		\|}
Line 21:		Line 23:

	<!-- Link to german wiki page -->		<!-- Link to german wiki page -->
-	[[de:~~Hello~~-plugin]]	+	[[de:Remote-plugin]]

Monroe: P

2004-09-21T06:53:16Z

New page

==Description==
[[Image:(missing)-plugin.jpg|thumb|Screenshot]]

==Hardware requirements==

==Software requirements==

==Installation==
See [[plugin installation]]

==Problems==

==Links==
{|
| [1]
| http://
| Plugin homepage
|}

[[Category:Plugins]]


[[de:Hello-plugin]]