AVerMedia AVerTV Bravo Hybrid PCI-E (H788)

From LinuxTVWiki

(Difference between revisions)
Jump to: navigation, search
(Add images)
(Additional driver information)
Line 58: Line 58:
=== Drivers ===
=== Drivers ===
-
 
+
*For SAA7160 development: <code>hg clone http://jusst.de/hg/saa716x/</code>
-
For Development tree hg clone http://jusst.de/hg/saa716x/
+
*For LGDT3304 developement: [http://jwilson.fedorapeople.org/misc/lgdt3305-add-lgdt3304-support-20090623.patch Jarod Wilson's patch to add lgdt3304 support to the lgdt3305 driver]
=== Sample Kernel Output ===
=== Sample Kernel Output ===

Revision as of 10:02, 5 March 2010

AVerMedia H788D

An ATSC PCIe card from AVerMedia.

It is currently unsupported under Linux.

Contents

Overview/Features

There are two versions of this card. A hybrid card (H788) which can handle ATSC/NTSC/QAM and a budget card (H788D) that can only handle ATSC/QAM.

Components Used

Identification

H788D

$ lspci -vvnn
03:00.0 Multimedia controller [0480]: Philips Semiconductors Device [1131:7160] (rev 03)
        Subsystem: Avermedia Technologies Inc Device [1461:0755]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 4 bytes
        Interrupt: pin A routed to IRQ 11
        Region 0: Memory at fd900000 (64-bit, non-prefetchable) [size=1M]
        Capabilities: [40] MSI: Enable- Count=1/32 Maskable- 64bit+
                Address: 0000000000000000  Data: 0000
        Capabilities: [50] Express (v1) Endpoint, MSI 00
                DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <256ns, L1 <1us
                        ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
                DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
                        RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
                        MaxPayload 128 bytes, MaxReadReq 128 bytes
                DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend-
                LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <4us, L1 <64us
                        ClockPM- Surprise- LLActRep- BwNot-
                LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- Retrain- CommClk+
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
        Capabilities: [74] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot-,D3cold-)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [80] Vendor Specific Information <?>
        Capabilities: [100] Vendor Specific Information <?>


Other Images

Making it Work

Firmware

Drivers

Sample Kernel Output

provide the relevant portion of dmesg here

Remote Controller Support

External Links

Personal tools