DVBSKY S960

From LinuxTVWiki

(Difference between revisions)
Jump to: navigation, search
(Picture)
(8 intermediate revisions not shown)
Line 1: Line 1:
-
DVB-S/S2 USB 2.0 box from [[DVBSKy]]
+
DVB-S/S2 USB 2.0 box from [[DVBSKy]].
 +
This device and its clone Mystique SaTix S2 V2 USB have a single LNB F-connector port, and include a IR receiver. The box is not jet supported by the main Kernel, but copying the firmware (see below) and compiling V4L from sources given by the producer [[DVBSKy]] suffices to make it run. The IR events are forwared not via LIRC but as xevents, but the shipped remote is not fully supported (e.g. the OK key does not produce a xevent).
==Features==
==Features==
*USB 2.0
*USB 2.0
*Low power
*Low power
 +
*Integrated IR receiver
== Components Used ==
== Components Used ==
*RF: Montage M88TS2022
*RF: Montage M88TS2022
-
*Demodulator: Montage M88DS3103
+
*Demodulator: 2nd generation [[Montage M88DS3103]]
*USB Bridge: Cypress CY68013
*USB Bridge: Cypress CY68013
-
== Firmware ==
+
== USB ID ==
-
*dvb-fe-ds3103.fw
+
lsusb output:
 +
ID 0572:6831 Conexant Systems (Rockwell), Inc.
 +
 
 +
== Firmware and Driver==
 +
At least up to Kernel 3.7.10 the driver is not included and has to be installed manually:
 +
*dvb-fe-ds3103.fw, available from [http://www.dvbsky.net DVBSKy]
 +
*media_build_bst_121102, from [http://www.dvbsky.net DVBSKy]
 +
The Firmware has to be copied to /lib/firmware (requires root privileges) and the driver has to be treated with "make" and "sudo make install".
== Picture ==
== Picture ==
-
[[File:S960_Box_Top.JPG]]
+
<gallery  perrow=2>
-
[[File:S960_PCB_Top.JPG]]
+
  Image:S960_Box_Top.JPG|Box view
 +
  Image:S960_PCB_Top.JPG|Internal view
 +
</gallery>
 +
 
 +
[[Category:DVB-S USB Devices]]
 +
[[Category:DVB-S2 USB Devices]]

Revision as of 18:55, 13 March 2013

DVB-S/S2 USB 2.0 box from DVBSKy. This device and its clone Mystique SaTix S2 V2 USB have a single LNB F-connector port, and include a IR receiver. The box is not jet supported by the main Kernel, but copying the firmware (see below) and compiling V4L from sources given by the producer DVBSKy suffices to make it run. The IR events are forwared not via LIRC but as xevents, but the shipped remote is not fully supported (e.g. the OK key does not produce a xevent).

Contents

Features

  • USB 2.0
  • Low power
  • Integrated IR receiver

Components Used

  • RF: Montage M88TS2022
  • Demodulator: 2nd generation Montage M88DS3103
  • USB Bridge: Cypress CY68013

USB ID

lsusb output: ID 0572:6831 Conexant Systems (Rockwell), Inc.

Firmware and Driver

At least up to Kernel 3.7.10 the driver is not included and has to be installed manually:

  • dvb-fe-ds3103.fw, available from DVBSKy
  • media_build_bst_121102, from DVBSKy

The Firmware has to be copied to /lib/firmware (requires root privileges) and the driver has to be treated with "make" and "sudo make install".

Picture

Personal tools