DigitalRise DTV PCI Cab CI

From LinuxTVWiki
Revision as of 00:00, 14 February 2010 by Herrkulesh (Talk | contribs)

Jump to: navigation, search
DigitalRise logo

A DVB-C PCI card from DigitalRise.

Overview/Features

  • PCI interface
  • Inputs: Antenna (Digital), Remote
  • Outputs: Antenna
  • CI Module

Components Used

Other Images

Identification

Provide here, for PCI/PCIe devices, the relevant output of lspci -vnn or, in the case of USB devices, lsusb -v . We're particularly interested in the subsystem ID's. To make a code block simply make the first character of each line a space. For example:

# lspci -vvvnn
00:0f.0 Multimedia controller [0480]: Twinhan Technology Co. Ltd Mantis DTV PCI Bridge Controller [Ver 1.0] [1822:4e35] (rev 01)
	Subsystem: Twinhan Technology Co. Ltd Device [1822:0043]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64 (2000ns min, 63750ns max)
	Interrupt: pin A routed to IRQ 5
	Region 0: Memory at cddff000 (32-bit, prefetchable) [size=4K]
	Kernel driver in use: Mantis

Making it Work

Is it supported under Linux? Are there experimental drivers? Does it partially work or identify as another card? (if yes, add this information below)

Firmware

Is there any firmware specific information for this device? if so, list it here. If your device doesn't require a firmware, simply mention that this is the case.

Drivers

Provide the details of where the drivers and patches and necessary tools are available.

Sample Kernel Output

Provide the relevant portion of dmesg here. For example:

# dmesg
[   45.569669] saa7130/34: v4l2 driver version 0.2.14 loaded
[   45.569739] saa7130[0]: found at 0000:04:03.0, rev: 1, irq: 20, latency: 84, mmio: 0xfdcfe000
[   45.569745] saa7130[0]: subsystem: 185b:c901, board: Compro Videomate DVB-T200 [card=71,autodetected]
[   45.569753] saa7130[0]: board init: gpio is 843f00
[   45.569809] input: saa7134 IR (Compro Videomate DV as /devices/pci0000:00/0000:00:1e.0/0000:04:03.0/input/input7
[   45.755429] saa7130[0]: i2c eeprom 00: 5b 18 01 c9 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
[   45.755437] saa7130[0]: i2c eeprom 10: 00 ff 86 0f ff 20 ff ff ff ff ff ff ff ff ff ff
[   45.755443] saa7130[0]: i2c eeprom 20: 01 40 01 03 03 ff 03 01 08 ff 00 88 ff ff ff ff
[   45.755449] saa7130[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   45.755454] saa7130[0]: i2c eeprom 40: ff d5 00 c4 86 1e ff ff ff ff ff ff ff ff ff ff
[   45.755460] saa7130[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff cb
[   45.755466] saa7130[0]: i2c eeprom 60: 30 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   45.755471] saa7130[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   45.755478] saa7130[0]: Unexpected tuner type info: d5 in eeprom
[   45.755532] saa7130[0]: registered device video0 [v4l2]
[   45.755550] saa7130[0]: registered device vbi0
[   45.873425] saa7134 ALSA driver for DMA sound loaded
[   45.873448] saa7130[0]/alsa: saa7130[0] at 0xfdcfe000 irq 20 registered as card -2
[   45.943354] saa7130[0]/dvb: frontend initialization failed

Remote Control Support

Discuss support for the remote control here.

External Links

Provide a link to the vendor's product page here along with any other external link to information that is generally helpful in relation to the device. For example: