Difference between revisions of "Dvbtune"

From LinuxTVWiki
Jump to: navigation, search
(add page.)
 
m (add note on DVB tools membership; external links; add category)
 
Line 1: Line 1:
dvbtune is a command line zapping / channel tuning utility for DVB cards, supporting legacy DVB API version 3.2 only.
+
dvbtune is a command line zapping / channel tuning utility for DVB cards, supporting legacy DVB API version 3.2 only.  It is part of the [[DVB tools]] package.
  
 
dvbtune is outdated, but may be still useful in some cases.
 
dvbtune is outdated, but may be still useful in some cases.
Line 29: Line 29:
 
</pre>
 
</pre>
  
==Download==
+
==External Links==
  [http://http://sourceforge.net/projects/dvbtools/ http://sourceforge.net/projects/dvbtools]
+
* [http://sourceforge.net/projects/dvbtools/ http://sourceforge.net/projects/dvbtools]
 +
 
 +
[[Category:Software]]

Latest revision as of 00:03, 17 January 2012

dvbtune is a command line zapping / channel tuning utility for DVB cards, supporting legacy DVB API version 3.2 only. It is part of the DVB tools package.

dvbtune is outdated, but may be still useful in some cases.

Documentation

usage: dvbtune -f frequency -p h|v -s symbol_rate -v vpid -a apid -t tpid
       dvbtune-f frequency

options:
       -c [0-3]  : Use DVB device [0-3]
       -f freq   : Absolute  Frequency  (DVB-S  in Hz or DVB-T in Hz), or L-band
                   Frequency (DVB-S in Hz or DVB-T in Hz).
       -p [H|V]  : Polarity (DVB-S only)
       -t [0|1]  : 0 = 22kHz off, 1 = 22kHz on
       -I [0|1|2]: 0 = Inversion off 1 = Inversion on, 2 = auto (Default)
       -S N      : Symbol rate (DVB-S only), e.g. 27500
       -D [0-4]  : DiSEqc command (0 = none)
       -V vpid   : Set video PID (oldstyle FF cards)
       -A apid   : Set audio PID (oldstyle FF cards))
       -T ttpid  : Set teletext PID (oldstyle FF cards)
       -pnr N    : Tune to Program Number (aka service) N
       -i        : Dump SI information as XML
       -x        : Attempt to auto-find other transponders (experimental)
       -m        : Monitor the reception quality
       -n dpid   : Add network interface and receive MPE on PID dpid
       --help    : help message
       --version : version string

External Links