Em28xx devices - Revision history

Nold: /* Table of validated boards */

2013-02-28T13:49:14Z

Table of validated boards

← Older revision		Revision as of 13:49, 28 February 2013
Line 88:		Line 88:
	\|<center>EM2820_BOARD_PINNACLE_DVC_90</center> \|\|<center>Pinnacle Dazzle DVC 90/DVC 100</center>		\|<center>EM2820_BOARD_PINNACLE_DVC_90</center> \|\|<center>Pinnacle Dazzle DVC 90/DVC 100</center>
	\|<center>0x2304:0x0207</center> \|\| <center>Analog</center>		\|<center>0x2304:0x0207</center> \|\| <center>Analog</center>
		+	\|-
		+	\|<center>EM2884_BOARD_PCTV_520E</center> \|\|<center>PCTVSystems QuatroStick-nano 520e</center>
		+	\|<center>0x2013:0x0251</center> \|\| <center>DVB</center>
	\|-		\|-
	\|<center>EM2800_BOARD_VGEAR_POCKETTV</center> \|\|<center>V-Gear PocketTV</center>		\|<center>EM2800_BOARD_VGEAR_POCKETTV</center> \|\|<center>V-Gear PocketTV</center>

Mrudge: /* Usbsnoop */

2012-11-08T12:54:33Z

Usbsnoop

← Older revision		Revision as of 12:54, 8 November 2012
Line 251:		Line 251:

	===Usbsnoop===		===Usbsnoop===
-	If you were asked to sniff your device, use ~~this~~ [http://www.linuxtv.org/wiki/index.php/Bus_snooping/sniffing#Snooping_Procedures: instructions]	+	If you were asked to sniff your device, use these [http://www.linuxtv.org/wiki/index.php/Bus_snooping/sniffing#Snooping_Procedures: instructions]

	==About em28xx models==		==About em28xx models==

Mrudge: /* Sample Kernel Output for Pinnacle PCTV nanoStick T2 on kernel 3.6r2 with latest drivers */

2012-11-08T12:53:33Z

Sample Kernel Output for Pinnacle PCTV nanoStick T2 on kernel 3.6r2 with latest drivers

← Older revision		Revision as of 12:53, 8 November 2012
Line 304:		Line 304:
	[ 6.784732] media: Linux media interface: v0.10		[ 6.784732] media: Linux media interface: v0.10
	[ 6.786876] Linux video capture interface: v2.00		[ 6.786876] Linux video capture interface: v2.00
		+
		+	... You may see the following section IF you are using the latest drivers:
		+
	[ 6.786879] WARNING: You are using an experimental version of the media stack.		[ 6.786879] WARNING: You are using an experimental version of the media stack.
	As the driver is backported to an older kernel, it doesn't offer		As the driver is backported to an older kernel, it doesn't offer
Line 324:		Line 327:
	[ 7.192689] cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.9 loaded		[ 7.192689] cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.9 loaded

-	... ~~You may see the following section IF you are using the latest drivers:~~	+	...

	[ 7.219209] WARNING: You are using an experimental version of the media stack.		[ 7.219209] WARNING: You are using an experimental version of the media stack.

Mrudge at 12:52, 8 November 2012

2012-11-08T12:52:28Z

← Older revision		Revision as of 12:52, 8 November 2012
Line 299:		Line 299:
	The following needs to be cleaned up and/or integrated into the article:		The following needs to be cleaned up and/or integrated into the article:
	* [[Em2880/remote]]		* [[Em2880/remote]]
		+
		+	==Sample Kernel Output for Pinnacle PCTV nanoStick T2 on kernel 3.6r2 with latest drivers==
		+	<pre>
		+	[ 6.784732] media: Linux media interface: v0.10
		+	[ 6.786876] Linux video capture interface: v2.00
		+	[ 6.786879] WARNING: You are using an experimental version of the media stack.
		+	As the driver is backported to an older kernel, it doesn't offer
		+	enough quality for its usage in production.
		+	Use it with care.
		+	Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
		+	8f7e91a31fb95c50880c76505b416630c0326d93 [media] smiapp-pll: Constify limits argument to smiapp_pll_calculate()
		+	6ec84a28f5f40e3ebef5d8186c4b11b10aa295d7 [media] smiapp-pll: Create a structure for OP and VT limits
		+	f5984bbdf402b586581bc292a5449f17ce4b8209 [media] smiapp-pll: Parallel bus support
		+	[ 6.793364] em28xx: New device PCTV Systems PCTV 290e @ 480 Mbps (2013:024f, interface 0, class 0)
		+	[ 6.793366] em28xx: DVB interface 0 found
		+	[ 6.793479] em28xx #0: chip ID is em28174
		+
		+	...
		+
		+	[ 7.087134] em28xx #0: Identified as PCTV nanoStick T2 290e (card=78)
		+	[ 7.087137] em28xx #0: v4l2 driver version 0.1.3
		+	[ 7.092015] em28xx #0: V4L2 video device registered as video0
		+	[ 7.092408] usbcore: registered new interface driver em28xx
		+	[ 7.192689] cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.9 loaded
		+
		+	... You may see the following section IF you are using the latest drivers:
		+
		+	[ 7.219209] WARNING: You are using an experimental version of the media stack.
		+	As the driver is backported to an older kernel, it doesn't offer
		+	enough quality for its usage in production.
		+	Use it with care.
		+	Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
		+	8f7e91a31fb95c50880c76505b416630c0326d93 [media] smiapp-pll: Constify limits argument to smiapp_pll_calculate()
		+	6ec84a28f5f40e3ebef5d8186c4b11b10aa295d7 [media] smiapp-pll: Create a structure for OP and VT limits
		+	f5984bbdf402b586581bc292a5449f17ce4b8209 [media] smiapp-pll: Parallel bus support
		+	[ 7.281849] tda18271 3-0060: creating new instance
		+	[ 7.286351] TDA18271HD/C2 detected @ 3-0060
		+	[ 7.415159] IR Sony protocol handler initialized
		+	[ 7.454729] DVB: registering new adapter (em28xx #0)
		+	[ 7.454737] usb 1-7: DVB: registering adapter 1 frontend 0 (Sony CXD2820R)...
		+	[ 7.455024] em28xx #0: Successfully loaded em28xx-dvb
		+	[ 7.455027] Em28xx: Initialized (Em28xx dvb Extension) extension
		+
		+	...
		+
		+	[ 7.514020] Registered IR keymap rc-pinnacle-pctv-hd
		+	[ 7.514192] input: em28xx IR (em28xx #0) as /devices/pci0000:00/0000:00:04.1/usb1/1-7/rc/rc1/input8
		+	[ 7.514312] rc1: em28xx IR (em28xx #0) as /devices/pci0000:00/0000:00:04.1/usb1/1-7/rc/rc1
		+	[ 7.517100] Em28xx: Initialized (Em28xx Input Extension) extension
		+	[ 7.529406] lirc_dev: IR Remote Control driver registered, major 241
		+
		+	</pre>

	==Feature Support==		==Feature Support==

CityK: move xc3028 firmware crap to xc3028 article ... this article is a craptacular mess

2012-01-30T00:53:19Z

move xc3028 firmware crap to xc3028 article ... this article is a craptacular mess

← Older revision		Revision as of 00:53, 30 January 2012
Line 4:		Line 4:
	See the [[How to Obtain, Build and Install V4L-DVB Device Drivers]] article		See the [[How to Obtain, Build and Install V4L-DVB Device Drivers]] article

-	~~==Firmware==~~
-	~~===Information===~~
-	* See section [http://www.linuxtv.org/wiki/index.php/Xceive_XC3028/XC2028#Firmware_Information Firmware Information in Xceive XC3028/XC2028 page]<br>

-	~~===How to get it?===~~
-	* See section [http://www.linuxtv.org/wiki/index.php/Xceive_XC3028/XC2028#How_to_Obtain_the_Firmware How to Obtain the Firmware in Xceive XC3028/XC2028 page]
-
-	~~=== Error: unable to open firmware v4l-cx25840.fw ===~~
-	~~==== Manually Extracting and Installing the Firmware ====~~
-	~~cd /tmp~~
-	~~shell> wget --user=wtv --password=Support07! ftp://ftp.hauppauge.com/Support/PVR150/Beta/070206%20amity2%202.0.48.25037.prerelease.zip~~
-	~~shell> unzip "070206 amity2 2.0.48.25037.prerelease.zip"~~
-	~~shell> cp HcwMakoC.ROM /lib/firmware/v4l-cx25840.fw~~
-
-	~~Based on [http://ivtvdriver.org/index.php/Firmware ivtv firmware wiki]~~
-	~~=== Error: firmware xc3028-v27.fw not found ===~~
-	~~firmware: requesting xc3028-v27.fw~~
-	~~xc2028 1-0061: Error: firmware xc3028-v27.fw not found.~~
-
-	* See section [http://www.linuxtv.org/wiki/index.php/Xceive_XC3028/XC2028#How_to_Obtain_the_Firmware How to Obtain the Firmware in Xceive XC3028/XC2028 to fix it]
-	~~<br>~~

	== Boards ==		== Boards ==

CityK: /* How to compile the latest em28xx driver? */ update latest driver source info

2012-01-30T00:44:36Z

How to compile the latest em28xx driver?: update latest driver source info

← Older revision		Revision as of 00:44, 30 January 2012
Line 2:		Line 2:

	==How to compile the latest em28xx driver?==		==How to compile the latest em28xx driver?==
-	* Start your computer without (not plugged) em28xx device	+	See the [[How to Obtain, Build and Install V4L-DVB Device Drivers]] article
-		+
-	* Download v4l-~~dvb tree~~	+
-	~~shell> hg clone http://linuxtv.org/hg/v4l-dvb~~	+
-		+
-	* Compile	+
-	~~shell> cd v4l-dvb~~	+
-	~~shell> make~~	+
-	~~shell> sudo make install~~	+
-		+
-	* Now plug your device and start your favorite application	+

	==Firmware==		==Firmware==

Gareththered: Added link to Honestech Vidbox NW03

2012-01-09T06:35:26Z

Added link to Honestech Vidbox NW03

← Older revision		Revision as of 06:35, 9 January 2012
Line 299:		Line 299:
	* [[Kaiser Baas USB DVD Maker 2 (KBA0300300)]]		* [[Kaiser Baas USB DVD Maker 2 (KBA0300300)]]
	* [[Gadmei USB TVBox UTV380]]		* [[Gadmei USB TVBox UTV380]]
		+	* [[Honestech Vidbox NW03]]
	====em2863 based devices====		====em2863 based devices====
	* [[SilverCrest_USB_2.0_Video_Grabber_VG_2000\|SilverCrest USB 2.0 Video Grabber VG 2000]]		* [[SilverCrest_USB_2.0_Video_Grabber_VG_2000\|SilverCrest USB 2.0 Video Grabber VG 2000]]

AndrewB: /* em2870/2871/2872/2873 */

2011-04-16T11:34:03Z

em2870/2871/2872/2873

← Older revision		Revision as of 11:34, 16 April 2011
Line 304:		Line 304:
	===em2870/2871/2872/2873===		===em2870/2871/2872/2873===
	* supports DVB/ATSC (but with no analog support). This is targeted at digital only devices.		* supports DVB/ATSC (but with no analog support). This is targeted at digital only devices.
		+	EM2870 devices include:
		+	* [[Compro VideoMate U3]]

	===em2874===		===em2874===

Seekatz: 0xeb1a:0x2863

2011-02-09T22:11:27Z

0xeb1a:0x2863

← Older revision		Revision as of 22:11, 9 February 2011
Line 201:		Line 201:
	\|-		\|-
	\|<center>EM2863_BOARD_SILVERCREST_VG2000</center> \|\|<center>[[SilverCrest_USB_2.0_Video_Grabber_VG_2000\|SilverCrest USB-Video-Grabber VG 2000]]</center>		\|<center>EM2863_BOARD_SILVERCREST_VG2000</center> \|\|<center>[[SilverCrest_USB_2.0_Video_Grabber_VG_2000\|SilverCrest USB-Video-Grabber VG 2000]]</center>
-	\|<center>0xeb1a:0x2863</center> \|\| <center>~~Not working~~ ([http://www.linuxtv.org/v4lwiki/index.php/Em28xx_devices#How_to_validate_my_vendor.2Fproduct_id_at_upstream_kernel.3F change it])</center>	+	\|<center>0xeb1a:0x2863</center> \|\| <center>Validated ([http://www.linuxtv.org/v4lwiki/index.php/Em28xx_devices#How_to_validate_my_vendor.2Fproduct_id_at_upstream_kernel.3F change it])</center>
	\|-		\|-
	\|<center>EM2870_BOARD_TERRATEC_XS</center> \|\|<center>Terratec Cinergy T XS</center>		\|<center>EM2870_BOARD_TERRATEC_XS</center> \|\|<center>Terratec Cinergy T XS</center>

Seekatz: /* em2863 based devices */

2011-02-09T22:00:33Z

em2863 based devices

← Older revision		Revision as of 22:00, 9 February 2011
Line 300:		Line 300:
	* [[Gadmei USB TVBox UTV380]]		* [[Gadmei USB TVBox UTV380]]
	====em2863 based devices====		====em2863 based devices====
-	* [[SilverCrest_USB_2.0_Video_Grabber_VG_2000\|SilverCrest USB 2.0 Video Grabber VG 2000]] ~~(not working yet).~~	+	* [[SilverCrest_USB_2.0_Video_Grabber_VG_2000\|SilverCrest USB 2.0 Video Grabber VG 2000]]

	===em2870/2871/2872/2873===		===em2870/2871/2872/2873===

← Older revision		Revision as of 13:49, 28 February 2013
Line 88:		Line 88:
	\|<center>EM2820_BOARD_PINNACLE_DVC_90</center> \|\|<center>Pinnacle Dazzle DVC 90/DVC 100</center>		\|<center>EM2820_BOARD_PINNACLE_DVC_90</center> \|\|<center>Pinnacle Dazzle DVC 90/DVC 100</center>
	\|<center>0x2304:0x0207</center> \|\| <center>Analog</center>		\|<center>0x2304:0x0207</center> \|\| <center>Analog</center>
		+	\|-
		+	\|<center>EM2884_BOARD_PCTV_520E</center> \|\|<center>PCTVSystems QuatroStick-nano 520e</center>
		+	\|<center>0x2013:0x0251</center> \|\| <center>DVB</center>
	\|-		\|-
	\|<center>EM2800_BOARD_VGEAR_POCKETTV</center> \|\|<center>V-Gear PocketTV</center>		\|<center>EM2800_BOARD_VGEAR_POCKETTV</center> \|\|<center>V-Gear PocketTV</center>