Difference between revisions of "Hardware vs software encoders"

From LinuxTVWiki
Jump to: navigation, search
(Can you get raw video from hardware encoder cards?)
Line 1: Line 1:
 
==Can you get raw video from hardware encoder cards?==
 
==Can you get raw video from hardware encoder cards?==
  
For card combos were the decoder is on the PCI bus (Conexant Blackbird, Philips Empress, ATI Theatre, etc.), you can grab either the raw video or the compressed video. These cards register two devices, one for raw video (/dev/video0) and one for compressed (/dev/video1).
+
For card combos where the decoder is on the PCI bus (Conexant Blackbird, Philips Empress, ATI Theatre, etc.), you can grab either the raw video or the compressed video. These cards register two devices, one for raw video (/dev/video0) and one for compressed (/dev/video1).
  
 
Cards with the encoder on the PCI bus ([[ivtv_devices |PVR-350/250]], DVB, etc.) only provide compressed streams. This is because the decoder is not accessable on the PCI bus, so you can't grab the raw stream from it.
 
Cards with the encoder on the PCI bus ([[ivtv_devices |PVR-350/250]], DVB, etc.) only provide compressed streams. This is because the decoder is not accessable on the PCI bus, so you can't grab the raw stream from it.

Revision as of 15:38, 3 October 2005

Can you get raw video from hardware encoder cards?

For card combos where the decoder is on the PCI bus (Conexant Blackbird, Philips Empress, ATI Theatre, etc.), you can grab either the raw video or the compressed video. These cards register two devices, one for raw video (/dev/video0) and one for compressed (/dev/video1).

Cards with the encoder on the PCI bus (PVR-350/250, DVB, etc.) only provide compressed streams. This is because the decoder is not accessable on the PCI bus, so you can't grab the raw stream from it.