Hardware vs software encoders

From LinuxTVWiki
Revision as of 18:55, 24 April 2005 by Liontooth (Talk | contribs)

Jump to: navigation, search

Can you get raw video from hardware encoder cards?

For card combos were the decoder is on the PCI bus (Conexant Blackbird, Philips Empress, ATI Theatre, etc.), you can grab either the raw video or the compressed video. These cards register two devices, one for raw video (/dev/video0) and one for compressed (/dev/video1).

Cards with the encoder on the PCI bus (PVR-350/250, DVB, etc.) only provide compressed streams. This is because the decoder is not accessable on the PCI bus, so you can't grab the raw stream from it.