Difference between revisions of "Hauppauge WinTV-HVR-2200"

From LinuxTVWiki
Jump to: navigation, search
(Identification)
Line 15: Line 15:
  
 
===Identification===
 
===Identification===
 
+
<pre>
 +
02:00.0 Multimedia controller: Philips Semiconductors Unknown device 7164 (rev 81)
 +
        Subsystem: Hauppauge computer works Inc. Unknown device 8901
 +
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 +
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 +
        Latency: 0, Cache Line Size: 32 bytes
 +
        Interrupt: pin A routed to IRQ 255
 +
        Region 0: Memory at fd400000 (64-bit, non-prefetchable) [size=4M]
 +
        Region 2: Memory at fd000000 (64-bit, non-prefetchable) [size=4M]
 +
        Capabilities: [40] Message Signalled Interrupts: Mask- 64bit+ Queue=0/4 Enable-
 +
                Address: 0000000000000000  Data: 0000
 +
        Capabilities: [50] Express (v1) Endpoint, MSI 00
 +
                DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <256ns, L1 <1us
 +
                        ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
 +
                DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
 +
                        RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
 +
                        MaxPayload 128 bytes, MaxReadReq 128 bytes
 +
                DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
 +
                LnkCap: Port #1, Speed 2.5GT/s, Width x2, ASPM L0s L1, Latency L0 <4us, L1 <64us
 +
                        ClockPM- Suprise- LLActRep- BwNot-
 +
                LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- Retrain- CommClk-
 +
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
 +
                LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
 +
        Capabilities: [74] Power Management version 3
 +
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot-,D3cold-)
 +
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
 +
        Capabilities: [7c] Vendor Specific Information <?>
 +
        Capabilities: [100] Vendor Specific Information <?>
 +
        Capabilities: [160] Virtual Channel <?>
 +
</pre>
  
 
===External Links===
 
===External Links===
 
* [http://www.hauppauge.com.sg/web-content/pages/products/data_hvr2200.html WinTV-HVR-2200 product page]
 
* [http://www.hauppauge.com.sg/web-content/pages/products/data_hvr2200.html WinTV-HVR-2200 product page]

Revision as of 09:53, 1 April 2008

HVR-2200 Image


The Hauppauge WinTV-HVR-2200 is a hybrid analogue and DVB-T PCIe card with a hardware MPEG2 encoder, and dual tuners.

Overview/Features

Dual DVB-T Input

Components Used

Based on as far as I know: PCIe dual channel hybrid PC TV PCV520/20

Identification

02:00.0 Multimedia controller: Philips Semiconductors Unknown device 7164 (rev 81)
        Subsystem: Hauppauge computer works Inc. Unknown device 8901
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 32 bytes
        Interrupt: pin A routed to IRQ 255
        Region 0: Memory at fd400000 (64-bit, non-prefetchable) [size=4M]
        Region 2: Memory at fd000000 (64-bit, non-prefetchable) [size=4M]
        Capabilities: [40] Message Signalled Interrupts: Mask- 64bit+ Queue=0/4 Enable-
                Address: 0000000000000000  Data: 0000
        Capabilities: [50] Express (v1) Endpoint, MSI 00
                DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <256ns, L1 <1us
                        ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
                DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
                        RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
                        MaxPayload 128 bytes, MaxReadReq 128 bytes
                DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
                LnkCap: Port #1, Speed 2.5GT/s, Width x2, ASPM L0s L1, Latency L0 <4us, L1 <64us
                        ClockPM- Suprise- LLActRep- BwNot-
                LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- Retrain- CommClk-
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
        Capabilities: [74] Power Management version 3
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [7c] Vendor Specific Information <?>
        Capabilities: [100] Vendor Specific Information <?>
        Capabilities: [160] Virtual Channel <?>

External Links