Hauppauge WinTV-HVR-2200

The Hauppauge WinTV-HVR-2200 is a hybrid analogue and DVB-T PCIe card with a hardware MPEG2 encoder, and dual tuners.

Overview/Features

Dual DVB-T/Analog TV Input

Components Used

Based on as far as I know: PCIe dual channel hybrid PC TV PCV520/20

• TDA18271 - Tuner (http://www.nxp.com/acrobat_download/literature/9397/75015474.pdf)

- In Latest HG

• NXP SAA7164E - NXP PCI Express dual-channel, PC TV capture/encode IC

- In Development by Steven Toth

• TDA10048HN (http://www.nxp.com/acrobat_download/literature/9397/75015931.pdf)

- In Latest HG

Download Firmware

wget http://www.steventoth.net/linux/hvr22xx/22xxdrv_27086.zip
wget http://www.steventoth.net/linux/hvr22xx/HVR-12x0-14x0-17x0_1_25_25271_WHQL.zip
wget http://www.steventoth.net/linux/hvr22xx/extract.sh

sh extract.sh
cp *fw /lib/firmware

Download Software

For stable tree

hg clone http://kernellabs.com/hg/saa7164-stable/

For Development tree

hg clone http://kernellabs.com/hg/~stoth/saa7164-dev/

then...

make menuconfig
edit as needed
make
make install
reboot

Identification

02:00.0 Multimedia controller: Philips Semiconductors Unknown device 7164 (rev 81)
        Subsystem: Hauppauge computer works Inc. Unknown device 8901
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 32 bytes
        Interrupt: pin A routed to IRQ 255
        Region 0: Memory at fd400000 (64-bit, non-prefetchable) [size=4M]
        Region 2: Memory at fd000000 (64-bit, non-prefetchable) [size=4M]
        Capabilities: [40] Message Signalled Interrupts: Mask- 64bit+ Queue=0/4 Enable-
                Address: 0000000000000000  Data: 0000
        Capabilities: [50] Express (v1) Endpoint, MSI 00
                DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <256ns, L1 <1us
                        ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
                DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
                        RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
                        MaxPayload 128 bytes, MaxReadReq 128 bytes
                DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
                LnkCap: Port #1, Speed 2.5GT/s, Width x2, ASPM L0s L1, Latency L0 <4us, L1 <64us
                        ClockPM- Suprise- LLActRep- BwNot-
                LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- Retrain- CommClk-
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
        Capabilities: [74] Power Management version 3
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [7c] Vendor Specific Information <?>
        Capabilities: [100] Vendor Specific Information <?>
        Capabilities: [160] Virtual Channel <?>

Sample kernel output

saa7164 driver loaded
ACPI: PCI Interrupt Link [APC5] enabled at IRQ 16
saa7164 0000:02:00.0: PCI INT A -> Link[APC5] -> GSI 16 (level, low) -> IRQ 16
CORE saa7164[0]: dev->lmmio  = 0xf9800000
CORE saa7164[0]: dev->lmmio2 = 0xf9c80000
CORE saa7164[0]: dev->bmmio  = 0xf9800000
CORE saa7164[0]: dev->bmmio2 = 0xf9c80000
CORE saa7164[0]: subsystem: 0070:8901, board: Hauppauge WinTV-HVR2200 [card=6,autodetected]
saa7164[0]/0: found at 0000:02:00.0, rev: 129, irq: 16, latency: 0, mmio: 0xfd400000
saa7164 0000:02:00.0: setting latency timer to 64
saa7164_downloadfirmware() no first image
saa7164_downloadfirmware() Waiting for firmware upload (v4l-saa7164-1.0.2.fw)
saa7164 0000:02:00.0: firmware: requesting v4l-saa7164-1.0.2.fw
saa7164_downloadfirmware() firmware read 3978608 bytes.
saa7164_downloadfirmware() firmware loaded.
Firmware file header part 1:
 .FirmwareSize = 0x0
 .BSLSize = 0x0
 .Reserved = 0x3cb57
 .Version = 0x3
saa7164_downloadfirmware() SecBootLoader.FileSize = 3978608
saa7164_downloadfirmware() FirmwareSize = 0x1fd6
saa7164_downloadfirmware() BSLSize = 0x0
saa7164_downloadfirmware() Reserved = 0x0
saa7164_downloadfirmware() Version = 0x51cc1
saa7164_downloadimage() Image downloaded, booting...
saa7164_downloadimage() Image booted successfully.
starting firmware download(2)
saa7164_downloadimage() Image downloaded, booting...
saa7164_downloadimage() Image booted successfully.
firmware download complete.
saa7164[0]: i2c bus 0 registered
saa7164[0]: i2c bus 1 registered
saa7164[0]: i2c bus 2 registered
saa7164_cmd_send() Invalid param
saa7164_api_i2c_read() error, ret(2) = 0x9
tda18271 4-0060: creating new instance
TDA18271HD/C2 detected @ 4-0060
DVB: registering new adapter (saa7164)
DVB: registering adapter 2 frontend 0 (NXP TDA10048HN DVB-T)...
tda18271 5-0060: creating new instance
TDA18271HD/C2 detected @ 5-0060
DVB: registering new adapter (saa7164)
DVB: registering adapter 3 frontend 0 (NXP TDA10048HN DVB-T)...
tda10048_firmware_upload: waiting for firmware upload (dvb-fe-tda10048-1.0.fw)...
i2c-adapter i2c-4: firmware: requesting dvb-fe-tda10048-1.0.fw
tda10048_firmware_upload: firmware read 24878 bytes.
tda10048_firmware_upload: firmware uploading
tda10048_firmware_upload: firmware uploaded
tda18271: performing RF tracking filter calibration
tda18271: RF tracking filter calibration complete
tda10048_firmware_upload: waiting for firmware upload (dvb-fe-tda10048-1.0.fw)...
i2c-adapter i2c-5: firmware: requesting dvb-fe-tda10048-1.0.fw
tda10048_firmware_upload: firmware read 24878 bytes.
tda10048_firmware_upload: firmware uploading
tda10048_firmware_upload: firmware uploaded
tda18271: performing RF tracking filter calibration
tda18271: RF tracking filter calibration complete

External Links

• WinTV-HVR-2200 product page