Difference between revisions of "Hauppauge WinTV-HVR-2250"

From LinuxTVWiki
Jump to: navigation, search
(djh - remove references to no longer existing hg trees. The support went upstream years ago.)
(5 intermediate revisions by 4 users not shown)
Line 21: Line 21:
  
 
Could someone who has this card please take a good look at the board and list all the chips here?
 
Could someone who has this card please take a good look at the board and list all the chips here?
 +
 +
The REV C1F1 has:
 +
*NXP SAA7164E/3
 +
* Pair of Conexant CX24228-21Z demodulators
 +
Samsung 819 K4H561638H-UCCC
  
 
The REV C2F2 has
 
The REV C2F2 has
Line 33: Line 38:
 
* 24C3265I- 408(4)9E - not sure on the (4)
 
* 24C3265I- 408(4)9E - not sure on the (4)
 
* Pair of LD1117 - C822
 
* Pair of LD1117 - C822
   
+
 
 +
The REV C4F2 has:
 +
* Trident SAA7164E/3 (P2A988.00 02 / ESD11252)
 +
* Samsung S5H1411X01-Y0 / N3511ND / H1103 (Two of these)
 +
* Presumed pair of: NXP TDA1827 1HDC2 / GT1049  03 / TSD10501 (no confidence in last line, did not remove EMI shield).
 +
* 54MHz and 24.690MHz oscillators (two of the latter, seems to be for the Samsung chips), there is a 3rd oscillator under the EMI shield that was not viewed.
 +
* ESMT M13S2561616A- 5T / ASK1PO35E  1052
 +
* Linear Technology (LT) 1120 / 3506 / EFE N9096 / e3 (last presumably a date/lot/factory code)
 +
* ATMEL1040 / TINY13A / <delta/triangle symbol> SSU (on reverse side of PCB).
  
 
===Identification===
 
===Identification===
Line 44: Line 57:
 
== Making it Work ==
 
== Making it Work ==
  
In September 2009, Steven Toth at [http://kernellabs.com kernellabs] submitted code to the linux kernel mailing list that adds support for the NXP Saa7164 PCIe A/V bridge used by the Hauppauge HVR-2250 card. See instructions at [[Hauppauge WinTV-HVR-2200]]. Note that support is still  limited to DVB-T / ATSC / QAM digital TV only; there is no analog support yet.
+
=== Digital Support ===
 +
In September 2009, Steven Toth at [http://kernellabs.com kernellabs] submitted code to the linux kernel mailing list that adds support for the NXP Saa7164 PCIe A/V bridge used by the Hauppauge HVR-2250 card. See instructions at [[Hauppauge WinTV-HVR-2200]]. Note that the upstream driver support is limited to DVB-T / ATSC / QAM digital TV only
 +
 
 +
=== Analog support ===
 +
Experimental analog support was released by KernelLabs on July 31, 2010. See here for more details related to installing analog support:  [http://www.kernellabs.com/blog/?p=1443 KernelLabs saa7164 analog announcement]
  
 
Development continues at http://www.steventoth.net/blog/products/hvr-2250/
 
Development continues at http://www.steventoth.net/blog/products/hvr-2250/
Line 55: Line 72:
 
=== Drivers ===
 
=== Drivers ===
  
Drivers are expected to be included in Linux 2.6.32.
+
Drivers were merged into the kernel in Linux 2.6.32.
 
+
In the meantime, for stable tree hg clone http://kernellabs.com/hg/saa7164-stable/
+
 
+
For Development tree hg clone http://kernellabs.com/hg/~stoth/saa7164-dev/
+
 
+
then... make menuconfig edit as needed make make install reboot
+
  
 
=== Sample Kernel Output ===
 
=== Sample Kernel Output ===
  
''provide the relevant portion of dmesg here''
+
<pre>
 +
[    9.281086] saa7164_downloadfirmware() no first image
 +
[    9.281103] saa7164_downloadfirmware() Waiting for firmware upload (NXP7164-2010-03-10.1.fw)
 +
[    9.412799] saa7164_downloadfirmware() firmware read 4019072 bytes.
 +
[    9.412806] saa7164_downloadfirmware() firmware loaded.
 +
[    9.412811] Firmware file header part 1:
 +
[    9.412815]  .FirmwareSize = 0x0
 +
[    9.412819]  .BSLSize = 0x0
 +
[    9.412822]  .Reserved = 0x3d538
 +
[    9.412825]  .Version = 0x3
 +
[    9.412829] saa7164_downloadfirmware() SecBootLoader.FileSize = 4019072
 +
[    9.412838] saa7164_downloadfirmware() FirmwareSize = 0x1fd6
 +
[    9.412842] saa7164_downloadfirmware() BSLSize = 0x0
 +
[    9.412846] saa7164_downloadfirmware() Reserved = 0x0
 +
[    9.412850] saa7164_downloadfirmware() Version = 0x1661c00
 +
[  16.079066] saa7164_downloadimage() Image downloaded, booting...
 +
[  16.180066] saa7164_downloadimage() Image booted successfully.
 +
[  16.180114] starting firmware download(2)
 +
[  17.897064] saa7164_downloadimage() Image downloaded, booting...
 +
[  20.119066] saa7164_downloadimage() Image booted successfully.
 +
[  20.119113] firmware download complete.
 +
[  20.164528] tveeprom 1-0000: Hauppauge model 88061, rev C4F2, serial# 7339378
 +
[  20.164537] tveeprom 1-0000: MAC address is 00:0d:fe:6f:fd:72
 +
[  20.164544] tveeprom 1-0000: tuner model is NXP 18271C2_716x (idx 152, type 4)
 +
[  20.164552] tveeprom 1-0000: TV standards NTSC(M) ATSC/DVB Digital (eeprom 0x88)
 +
[  20.164559] tveeprom 1-0000: audio processor is SAA7164 (idx 43)
 +
[  20.164564] tveeprom 1-0000: decoder processor is SAA7164 (idx 40)
 +
[  20.164570] tveeprom 1-0000: has radio, has IR receiver, has no IR transmitter
 +
[  20.164575] saa7164[0]: Hauppauge eeprom: model=88061
 +
[  20.490460] tda18271 2-0060: creating new instance
 +
[  20.494989] TDA18271HD/C2 detected @ 2-0060
 +
[  20.699512] DVB: registering new adapter (saa7164)
 +
[  20.699542] DVB: registering adapter 0 frontend 0 (Samsung S5H1411 QAM/8VSB Frontend)...
 +
[  20.991060] tda18271 3-0060: creating new instance
 +
[  20.995384] TDA18271HD/C2 detected @ 3-0060
 +
[  21.197830] tda18271: performing RF tracking filter calibration
 +
[  23.397812] tda18271: RF tracking filter calibration complete
 +
[  23.399813] DVB: registering new adapter (saa7164)
 +
[  23.399838] DVB: registering adapter 1 frontend 0 (Samsung S5H1411 QAM/8VSB Frontend)...
 +
[  23.402824] saa7164[0]: registered device video1 [mpeg]
 +
[  23.634564] saa7164[0]: registered device video2 [mpeg]
 +
[  23.845910] saa7164[0]: registered device vbi0 [vbi]
 +
[  23.846392] saa7164[0]: registered device vbi1 [vbi]
 +
</pre>
  
 
===Remote Controller Support===
 
===Remote Controller Support===

Revision as of 21:03, 7 March 2013

caption

An ATSC PCIe card from Hauppauge.

Support for its digital side was added to Hg in September 2009.

Overview/Features

Dual hybrid digital/analog tuners, low profile.

  • Single slot PCI Express (PCIe) X1 board, half height.
  • Two analog tuners, each with their own hardware encoders
  • Two digital TV receivers for ATSC or clear QAM
  • Dual built-in hardware MPEG-2 encoders.

Components Used

Could someone who has this card please take a good look at the board and list all the chips here?

The REV C1F1 has:

  • NXP SAA7164E/3
  • Pair of Conexant CX24228-21Z demodulators

Samsung 819 K4H561638H-UCCC

The REV C2F2 has

The REV C3F2 has

  • NXP SAA7164E/3
  • Samsung 846 - K4H561638J-LCCC - H56162YI369GDU
  • Pair of Conexant CX24228-21Z - NI3W4H - 0811 KR
  • 0916 - 3506 - EFE - N8578
  • 24C3265I- 408(4)9E - not sure on the (4)
  • Pair of LD1117 - C822

The REV C4F2 has:

  • Trident SAA7164E/3 (P2A988.00 02 / ESD11252)
  • Samsung S5H1411X01-Y0 / N3511ND / H1103 (Two of these)
  • Presumed pair of: NXP TDA1827 1HDC2 / GT1049 03 / TSD10501 (no confidence in last line, did not remove EMI shield).
  • 54MHz and 24.690MHz oscillators (two of the latter, seems to be for the Samsung chips), there is a 3rd oscillator under the EMI shield that was not viewed.
  • ESMT M13S2561616A- 5T / ASK1PO35E 1052
  • Linear Technology (LT) 1120 / 3506 / EFE N9096 / e3 (last presumably a date/lot/factory code)
  • ATMEL1040 / TINY13A / <delta/triangle symbol> SSU (on reverse side of PCB).

Identification

Other Images

Top view WinTV HVR-2250.jpg

Making it Work

Digital Support

In September 2009, Steven Toth at kernellabs submitted code to the linux kernel mailing list that adds support for the NXP Saa7164 PCIe A/V bridge used by the Hauppauge HVR-2250 card. See instructions at Hauppauge WinTV-HVR-2200. Note that the upstream driver support is limited to DVB-T / ATSC / QAM digital TV only

Analog support

Experimental analog support was released by KernelLabs on July 31, 2010. See here for more details related to installing analog support: KernelLabs saa7164 analog announcement

Development continues at http://www.steventoth.net/blog/products/hvr-2250/

Firmware

The windows driver and linux firmware extraction scripts are up on http://www.steventoth.net/linux/hvr22xx

Drivers

Drivers were merged into the kernel in Linux 2.6.32.

Sample Kernel Output

[    9.281086] saa7164_downloadfirmware() no first image
[    9.281103] saa7164_downloadfirmware() Waiting for firmware upload (NXP7164-2010-03-10.1.fw)
[    9.412799] saa7164_downloadfirmware() firmware read 4019072 bytes.
[    9.412806] saa7164_downloadfirmware() firmware loaded.
[    9.412811] Firmware file header part 1:
[    9.412815]  .FirmwareSize = 0x0
[    9.412819]  .BSLSize = 0x0
[    9.412822]  .Reserved = 0x3d538
[    9.412825]  .Version = 0x3
[    9.412829] saa7164_downloadfirmware() SecBootLoader.FileSize = 4019072
[    9.412838] saa7164_downloadfirmware() FirmwareSize = 0x1fd6
[    9.412842] saa7164_downloadfirmware() BSLSize = 0x0
[    9.412846] saa7164_downloadfirmware() Reserved = 0x0
[    9.412850] saa7164_downloadfirmware() Version = 0x1661c00
[   16.079066] saa7164_downloadimage() Image downloaded, booting...
[   16.180066] saa7164_downloadimage() Image booted successfully.
[   16.180114] starting firmware download(2)
[   17.897064] saa7164_downloadimage() Image downloaded, booting...
[   20.119066] saa7164_downloadimage() Image booted successfully.
[   20.119113] firmware download complete.
[   20.164528] tveeprom 1-0000: Hauppauge model 88061, rev C4F2, serial# 7339378
[   20.164537] tveeprom 1-0000: MAC address is 00:0d:fe:6f:fd:72
[   20.164544] tveeprom 1-0000: tuner model is NXP 18271C2_716x (idx 152, type 4)
[   20.164552] tveeprom 1-0000: TV standards NTSC(M) ATSC/DVB Digital (eeprom 0x88)
[   20.164559] tveeprom 1-0000: audio processor is SAA7164 (idx 43)
[   20.164564] tveeprom 1-0000: decoder processor is SAA7164 (idx 40)
[   20.164570] tveeprom 1-0000: has radio, has IR receiver, has no IR transmitter
[   20.164575] saa7164[0]: Hauppauge eeprom: model=88061
[   20.490460] tda18271 2-0060: creating new instance
[   20.494989] TDA18271HD/C2 detected @ 2-0060
[   20.699512] DVB: registering new adapter (saa7164)
[   20.699542] DVB: registering adapter 0 frontend 0 (Samsung S5H1411 QAM/8VSB Frontend)...
[   20.991060] tda18271 3-0060: creating new instance
[   20.995384] TDA18271HD/C2 detected @ 3-0060
[   21.197830] tda18271: performing RF tracking filter calibration
[   23.397812] tda18271: RF tracking filter calibration complete
[   23.399813] DVB: registering new adapter (saa7164)
[   23.399838] DVB: registering adapter 1 frontend 0 (Samsung S5H1411 QAM/8VSB Frontend)...
[   23.402824] saa7164[0]: registered device video1 [mpeg]
[   23.634564] saa7164[0]: registered device video2 [mpeg]
[   23.845910] saa7164[0]: registered device vbi0 [vbi]
[   23.846392] saa7164[0]: registered device vbi1 [vbi]

Remote Controller Support

External Links