ITE IT9135
IT9135 Devices
| Vendor Device/Model |
Supported | ID on Interface |
Hardware | Firmware | Comment / Pictures | URL | E |
|---|---|---|---|---|---|---|---|
| DigitalNow TinyTwin DVB-T Receiver V3a | ✔ Yes, in kernel since 3.15 | 048d:9006 USB2.0 | IT9135 | dvb-usb-it9135-02.fw | 
| ||
| KWorld UB499-2T | See Device page. IT9135 ✔ Yes from Kernel 3.2 | 048d:9135 USB2.0 | ITE IT9135 | dvb-usb-it9135-01.fw |
| ||
| ITE Inc. Zolid Mini DVB-T Stick Version 1 |
✔ Yes, in kernel since 3.2 Chip Version 1 |
048d:9135 USB2.0 | IT9135 | from 3.3 dvb-usb-it9135-01.fw Kernel 3.2 uses dvb-usb-it9137-01.fw |
Markings Mini DVB T 
|
| |
| ITE Inc. Zolid Mini DVB-T Stick Version 2 |
✔ Yes, in kernel since 3.4 Chip Version 2 |
048d:9135 USB2.0 | IT9135 | dvb-usb-it9135-02.fw | Markings HDTV USB DVB -T 
|
| |
| ITE Inc. Generic 9005 Device | ✔ Yes, in kernel since 3.3 | 048d:9005 USB2.0 | IT9135 | dvb-usb-it9135-01.fw |
| ||
| ITE Inc. Generic 9006 Device | ✔ Yes, in kernel since 3.3 | 048d:9006 USB2.0 | IT9135 | dvb-usb-it9135-02.fw | Marking Various - RTK |
|
IT9137 Devices
| Vendor Device/Model |
Supported | ID on Interface |
Hardware | Firmware | Comment / Pictures | URL | E |
|---|---|---|---|---|---|---|---|
| KWorld UB499-2T T09 | ✔ Yes, in kernel since 3.2 | 1b80:e409 USB2.0 | IT9137 | dvb-usb-it9137-01.fw |
| ||
| Sveon STV22 Dual DVB-T HDTV | ✔ Yes, in kernel since 3.2 | 1b80:e411 USB2.0 | IT9137 | dvb-usb-it9137-01.fw |
|
Modules
IT9135 and IT9137 devices are supported by V4L through the following modules.
dvb-usb-it913x it913x-fe
Module Options
PID Filter
filter on (default)
dvb-usb-it913x pid=0
filter off
dvb-usb-it913x pid=1
From Kernel 3.7 pid has been removed, set to off and controlled from dvb-usbv2.
Firmware Loading Options
dvb-usb-it913x firmware=#
Number # options
0 = AUTO(default)
1 = dvb-usb-it9137-01.fw (chip version 1)
2 = dvb-usb-it9135-01.fw (chip version 1)
3 = dvb-usb-it9135-02.fw (chip version 2)
Firmware Instructions
Locate file get_dvb_firmware in Documentation/dvb of Kernel 3.3 and above.
For IT9135 devices
./get_dvb_firmware it9135
This will produce
dvb-usb-it9135-01.fw dvb-usb-it9135-02.fw
Manual extraction of firmware from www.ite.com.tw
dd if=dvb-usb-it9135.fw ibs=1 skip=64 count=8128 of=dvb-usb-it9135-01.fw dd if=dvb-usb-it9135.fw ibs=1 skip=12866 count=5817 of=dvb-usb-it9135-02.fw
For IT9137 devices
./get_dvb_firmware it9137
This will produce
dvb-usb-it9137-01.fw
copy this to your default firmware location. Usually /lib/firmware.
Manual extraction of firmware from
Driver_V10.323.1.0412.100412.zip
in path
Driver_V10.323.1.0412.100412/Data/x86/
extract IT9135BDA.sys Dated Mon 22 Mar 2010 10:20
dd if=IT9135BDA.sys ibs=1 skip=69632 count=5731 of=dvb-usb-it9137-01.fw
Installation Instructions
Kernels 2.6.31 to 3.3 and updates
Go to the How to Obtain, Build and Install V4L-DVB Device Drivers page and download and build the lastest media_build.
Driver last updated: 09 APR 12
Driver Version: 1.28
DVR Applications
When using digital video recorder such as VDR, MythTV etc turn pid filter off.
Modify /etc/modules (or /etc/modules.preload) file and enter example;
dvb-usb-it913x pid=1
Since driver version 1.27 PID 8192 can be used pass through entire transport stream.
Known Problems
PID filtering issues on some networks.
Does not work with w_scan with PID filter on. Use the -F option
w_scan -F
Issues with 9005 type devices.
Chip Version 2 on ID 048d:9135 does not tune (fixed from driver version 1.24).
Kernels 3.2 and 3.3 issues with version 2 chips on ID 0485:9135 update with media_build.
Issues with 9006 Chip version 1 devices resetting USB controller.
Warm boot from other places
Users should not reboot between operating systems without a power off cold boot. Some devices may have different tuner registers and firmware applied. The two should always match. The reverse also applies.