KNC1 TV-Station DVB-T

From LinuxTVWiki
Revision as of 01:20, 12 May 2009 by Jimbley (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

A DVB-T PCI card produced by KNC1 based on the Philips SAA7146.

Overview/Features

  • Interface: PCI
  • Inputs: Antenna, CineView Module Connector
  • Output: Antenna loop-through (amplified).

The card has a passthrough output, so you can daisy-chain multiple cards to one antenna (if your signal isn't too weak). The card also has a CI connector, which is supported under Linux.

Components Used

  • Philips SAA7146
  • tin box: Philips TU1216L
  • demodulator location: tin box
    • demodulator: Philips TDA10046 @0x08
  • PLL: Philips tda6651tt @0x60

Identification

 PCI device id: 1131:7146
 PCI subsystem id: 1894:0030

Making it Work

Works fine under Linux.

Firmware

  • Requires firmware for the TDA10046.

Drivers

  • frontend driver: tda1004x
  • The card uses the budget-av driver in Linux
  • This card is able to deliver the full MPEG-2 Transport Stream to the host.
  • Card driver: budget-av

External Links

[http://www.knc1.com/gb/produkte/digital_dvb_t.htm TV-Station DVB-T product page.