Medion MD95700 (DVB-T): Difference between revisions
(+image) |
(fix) |
||
| Line 20: | Line 20: | ||
| hw=[[CX22702|Conexant CX22702]] |
| hw=[[CX22702|Conexant CX22702]] |
||
| comment=The box also has a X10 remote control. This is radio, not IR, and is supported by the ati remote driver. It also has a USB2.0 hub (Tetrahub) with one additional USB port. Both of them are working without mains power. |
| comment=The box also has a X10 remote control. This is radio, not IR, and is supported by the ati remote driver. It also has a USB2.0 hub (Tetrahub) with one additional USB port. Both of them are working without mains power. |
||
| pic=[[MD95700.jpg|thumb|Inner circuits (tuner)]] |
| pic=[[Image:MD95700.jpg|thumb|Inner circuits (tuner)]] |
||
}} |
}} |
||
}} |
}} |
||
Revision as of 20:59, 29 March 2008
A DVB-T USB device from Medion.
It is supported by LinuxTV (although, not completely; see below).
Overview
The following drivers are needed for these devices:
- cx22702.ko - dvb-usb.ko - dvb-usb-cxusb.ko
The analogue part (handled by a Conexant CX25842) is not supported yet. The cx25840 driver from ivtv can be used to implement support.
| Device / Model | Type | Hardware | Firmware | URL / Pictures |
|---|---|---|---|---|
| Comments & quirks | ||||
| Medion MD 95700 4in1 | USB2.0 | Conexant CX22702 | ||
| The box also has a X10 remote control. This is radio, not IR, and is supported by the ati remote driver. It also has a USB2.0 hub (Tetrahub) with one additional USB port. Both of them are working without mains power. | ||||
There is a new firmware, version 1.0.2.14, for the MD 95700 from Medion.
You can download it directly: [1] (in German). Please read the Readme before you flash the box.
This update fixes some video problems, but it is incompatible with the old dvb-usb drivers (i.e. kernels from 2005). If you use your box under Windows, don't forget to ensure that the Windows drivers are up to date too.
Distro-specific note: Using the Medion MD95700 with Suse 10.1
please review this text ... thanks!!
On a Suse 10.1 default smp kernel, the driver module dvb-usb-cxusb.ko is missing. The USB box can not be used without building this module. The sources of this driver are in the files drivers/media/dvb/dvb-usb/cxusb.*.
The driver for the Medion MD 95700 is referenced in newer kernel configuration as "Conexant USB2.0 hybrid reference design support". Yast uses the term "Conexant DVB-T reference design".
To build this driver:
- Install kernel-source, gcc, ncurses and optional kernal-syms
- cd /usr/src/linux
- Optional copy the current kernel configuration: cp /proc/config.gz .config
- Enable the build of the missing module:
- su
- make menuconfig
- Device Drivers -> Multimedia Devices -> Digital Video Broadcasting Devices -> Conexant USB2.0 hybrid reference design support -> build as Module
- Build either the the whole kernel inluding modules or this single module. The build process is described in /usr/src/linux/README.SUSE
- Install the module(s)
- Load the module using "modprobe dvb-usb-cxusb". On reboot, the module should be automaticallly loaded if the box is connected.
- The devices /dev/dvb/adapter0/* should be created on module load
- Configure the box using Yast -> Hardware -> Tv Card -> Add -> Other -> Conexant DVB-T reference design
- Install and configure your favorite DVB Tv application
Note: The current Suse kernel source "2.6.16.21-0.13" has the new dvd-usb drivers included and therefore can handle boxes flashed to the firmware 1.0.2.14.
Todo: Configuration of the X10 RF remote control receiver and applications