Panasonic MN88472

From LinuxTVWiki
Jump to navigation Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

NM88472

The NM88472 is a DVB-T/DVB-T2/DVB-C demodulator chip manufactured by Panasonic.

I2C Adressing

The chips has 3 I2C addresses, one for each demodulator bank:

8 bit (7 bit)
0x38  (0x1c) - DVB-T2
0x30  (0x18) - DVB-T
0x34  (0x1a) - DVB-C


Demod Initialization

  • Write init reg values for all 3 register banks (T2/T and last C)
  • Prepare DVB-T bank for firmware upload
    • Write 0x20 to register 0xf0 in T bank
    • Write 0x03 to register 0xf5 in T bank (this most likely set the mcu to reset state)
  • Load firmware for demod
    • Write all firmware bytes to register 0xf6 to fill the mcu memory
  • Start demod firmware
    • Write 0x00 to register 0xf5 in T bank
  • Check parity
    • Read register 0xf8, if byte 5 (0x10) is set the parity check failed.

Demod probe

  • Read register 0xFF in T2 bank

The answer should be 0x02.

TS mode

How to set chip ts mode.

Parallel TS with fixed clock

  • Write 0x00 to register 0x08 in T2 bank
  • Write 0xE1 to register 0xD9 in T bank

Parallel TS with variable clock

  • Write 0x00 to register 0x08 in T2 bank
  • Write 0xE3 to register 0xD9 in T bank

Serial TS with variable clock

  • Write 0x1D to register 0x08 in T2 bank
  • Write 0xE3 to register 0xD9 in T bank