Difference between revisions of "Pinnacle PCTV HD Mini Stick (80e)"

From LinuxTVWiki
Jump to: navigation, search
(djh - update status for this device)
(djh - removing information that is outright false. In general, it helps to actually try a procedure before adding it as authoritative information to a wiki.)
(12 intermediate revisions by 4 users not shown)
Line 1: Line 1:
[[Image:PCTV 80e Top.JPG|thumb|240px|Pinnacle PCTV HD mini Stick (80e)]]
+
[[file:PCTV 80e Top.JPG|thumb|240px|Pinnacle PCTV HD mini Stick (80e)]]
 +
 
 +
An [[ATSC]] [[ATSC USB Devices|USB 2.0 device]] by [[Pinnacle]]. 
 +
 
 +
It not supported under Linux, although there is now a beta driver which can be found here: [http://www.kernellabs.com/blog/?p=1435].
  
 
==Overview/Features==
 
==Overview/Features==
A hybrid USB TV Tuner that supports ATSC & ClearQAM.
+
An USB TV Tuner that supports 8-VSB and QAM.
 
The unit ships with an IR remote control & telescopic antenna.
 
The unit ships with an IR remote control & telescopic antenna.
  
 
===Components Used===
 
===Components Used===
 
[[Image:PCTV 80e Inside1.JPG|thumb|240px|Circuit board]]
 
[[Image:PCTV 80e Inside1.JPG|thumb|240px|Circuit board]]
 +
[[Image:PCTV 80e Inside2.JPG|thumb|240px|Circuit board]]
  
 
{| class="wikitable"  
 
{| class="wikitable"  
|Manufacturer  
+
! Manufacturer !! IC Part # !! Function !! I²C address !! GPIO(s)
|Part #
+
 
|Function
+
|I2c addr
+
|GPIO(s)
+
 
|-
 
|-
|Empia
+
|Philips / NXP
|EM2874
+
|TDA18271 C2
|USB Bridge
+
|Tuner
|n/a
+
|0xc0
 
|n/a
 
|n/a
 +
 
|-
 
|-
 
|Micronas  
 
|Micronas  
Line 26: Line 29:
 
|0x52
 
|0x52
 
|reset=6
 
|reset=6
 +
 
|-
 
|-
|Philips / NXP
+
|Empia
|TDA18271 C2
+
|EM2874
|Tuner
+
|USB Bridge
|0xc0
+
 
|n/a
 
|n/a
 +
|n/a
 +
 
|-
 
|-
 
|
 
|
Line 38: Line 43:
 
|0xa0
 
|0xa0
 
|n/a
 
|n/a
 +
 
|-
 
|-
 
|
 
|
Line 46: Line 52:
  
 
|}
 
|}
 
[[Image:PCTV 80e Inside2.JPG|thumb|240px|Circuit board]]
 
  
 
===Identification===
 
===Identification===
Line 134: Line 138:
  
 
==Making It Work==
 
==Making It Work==
Not supported (yet).
 
  
I (Devin Heitmueller) have this device fully functional under Linux.  I'm working through getting the licensing straightened out with Micronas, and hope to push patches in the next couple of weeks (10/29/2008).
+
On July 4, 2010, KernelLabs released a beta driver for this device.  It is intended to be merged upstream once it has been cleaned up to meet the Linux kernel coding standardsMore Information can be found in this blog post: [http://www.kernellabs.com/blog/?p=1435 KernelLabs blog]
 +
 
 +
'''Note''': The patches do not work with current kernels like 2.6-35 due to changes in the surrounding mainline kernel (API breakage).
  
 
==External Links==
 
==External Links==
* [http://pinnaclesys.com/ministick http://pinnaclesys.com/ministick]
+
* [http://pinnaclesys.com/ministick Mini Stick (80e) product page]
 +
[[Category:ATSC USB Devices]]

Revision as of 18:59, 21 March 2011

Pinnacle PCTV HD mini Stick (80e)

An ATSC USB 2.0 device by Pinnacle.

It not supported under Linux, although there is now a beta driver which can be found here: [1].

Overview/Features

An USB TV Tuner that supports 8-VSB and QAM. The unit ships with an IR remote control & telescopic antenna.

Components Used

Circuit board
Circuit board
Manufacturer IC Part # Function I²C address GPIO(s)
Philips / NXP TDA18271 C2 Tuner 0xc0 n/a
Micronas DRX 3933J 8VSB / QAM Digital Demodulator [2] 0x52 reset=6
Empia EM2874 USB Bridge n/a n/a
EEPROM 0xa0 n/a
LED n/a active=7

Identification

USB Subsystem ID is: 2304:023f.

Output of lsusb -v:

Bus 007 Device 003: ID 2304:023f Pinnacle Systems, Inc. [hex]
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0        64
  idVendor           0x2304 Pinnacle Systems, Inc. [hex]
  idProduct          0x023f
  bcdDevice            1.00
  iManufacturer           1 Pinnacle Systems
  iProduct                2 PCTV 80e
  iSerial                 3 123456789012
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           41
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0x80
      (Bus Powered)
    MaxPower              500mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass      0
      bInterfaceProtocol      0
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x84  EP 4 IN
        bmAttributes            1
          Transfer Type            Isochronous
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0000  1x 0 bytes
        bInterval               1
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       1
      bNumEndpoints           1
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass      0
      bInterfaceProtocol      0
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x84  EP 4 IN
        bmAttributes            1
          Transfer Type            Isochronous
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x03ac  1x 940 bytes
        bInterval               1
Device Qualifier (for other device speed):
  bLength                10
  bDescriptorType         6
  bcdUSB               2.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0        64
  bNumConfigurations      1
Device Status:     0x0000
  (Bus Powered)

Making It Work

On July 4, 2010, KernelLabs released a beta driver for this device. It is intended to be merged upstream once it has been cleaned up to meet the Linux kernel coding standards. More Information can be found in this blog post: KernelLabs blog

Note: The patches do not work with current kernels like 2.6-35 due to changes in the surrounding mainline kernel (API breakage).

External Links