szap-s2

From LinuxTVWiki

(Difference between revisions)
Jump to: navigation, search
(Created page with '{{lowercase|szap-s2}} ''szap-s2'' is a command line channel zapping (i.e. tuning) utility similar to szap but including support for S2API a.k.a. DVB API version 5, which...')
(Fixed typo for BPSK modulation option)
 
(One intermediate revision not shown)
Line 35: Line 35:
       -p        : add pat and pmt to TS recording (implies -r)
       -p        : add pat and pmt to TS recording (implies -r)
       -S        : delivery system type DVB-S=0, DVB-S2=1
       -S        : delivery system type DVB-S=0, DVB-S2=1
-
       -M        : modulation 1=8PSK 2=QPSK 5=8PSK
+
       -M        : modulation 1=BPSK 2=QPSK 5=8PSK
       -C        : fec 0=NONE, 12=1/2, 23=2/3, 34=3/4 35=3/5 45=4/5 56=5/6 67=6/7 89=8/9 910=9/10 999=AUTO
       -C        : fec 0=NONE, 12=1/2, 23=2/3, 34=3/4 35=3/5 45=4/5 56=5/6 67=6/7 89=8/9 910=9/10 999=AUTO
       -O        : rolloff 35=0.35 25=0.25 20=0.20 0=UNKNOWN
       -O        : rolloff 35=0.35 25=0.25 20=0.20 0=UNKNOWN
Line 47: Line 47:
* [[scan]]
* [[scan]]
* [[w_scan]]
* [[w_scan]]
 +
==Download==
 +
 +
hg clone http://mercurial.intuxication.org/hg/szap-s2
 +
==Links==
==Links==
* [http://mercurial.intuxication.org/hg/szap-s2/ download]
* [http://mercurial.intuxication.org/hg/szap-s2/ download]
[[Category:Software]]
[[Category:Software]]

Latest revision as of 10:08, 12 December 2009

szap-s2 is a command line channel zapping (i.e. tuning) utility similar to szap but including support for S2API a.k.a. DVB API version 5, which supports DVB-S2. When using szap-s2, one instructs it to change the channel to one of a list of channels supplied in a channels.conf type file.

Note: szap-s2 requires Linux DVB driver API version 5 -- i.e. use kernel 2.6.28 or later.

Contents

Documentation

scan-s2 does not have a man page. However if you run it with no parameters a summary of its command options is displayed.


usage: szap -q
         list known channels
       szap [options] -n channel-number
         zap to channel via channel number
       szap [options] channel_name
         zap to channel via full name (case insensitive)

options:
       -a number : use given adapter (default 0)
       -f number : use given frontend (default 0)
       -d number : use given demux (default 0)
       -c file   : read channels list from 'file'
       -V        : use VDR channels list file format (default zap)
       -b        : enable Audio Bypass (default no)
       -x        : exit after tuning
       -H        : human readable output
       -D        : params debug
       -r        : set up /dev/dvb/adapterX/dvr0 for TS recording
       -l lnb-type (DVB-S Only) (use -l help to print types) or
       -l low[,high[,switch]] in Mhz
       -i        : run interactively, allowing you to type in channel names
       -p        : add pat and pmt to TS recording (implies -r)
       -S        : delivery system type DVB-S=0, DVB-S2=1
       -M        : modulation 1=BPSK 2=QPSK 5=8PSK
       -C        : fec 0=NONE, 12=1/2, 23=2/3, 34=3/4 35=3/5 45=4/5 56=5/6 67=6/7 89=8/9 910=9/10 999=AUTO
       -O        : rolloff 35=0.35 25=0.25 20=0.20 0=UNKNOWN

Also See

Download

hg clone http://mercurial.intuxication.org/hg/szap-s2

Links

Personal tools